CRT micro FPV quadcopter by cartman

Last crawled date: 3 years ago

This is my last project,fpv quadcopter based on scisky FC board with DSM receiver,motors are racestar 8520,props 56mm in diameter from toy quadcopter(withstand almost every crash),fpv camera is taken from eachine e010s but you can use almost every AIO FPV camera on the market.
As battery you can use 1s lipo cell with appropriate weight and size,i have
personally best experience with turnigy nanotech with high C rating,with this cells is no problem to make some flips,rolls,it flies almost like an adult fpv racing copter.Prop guard is detachable,i use it only to fly indoor.
Everything holds together doublesided tape.
I've also designed box from 3 pieces for easy transportation with section for lipos and spare props.
For desing i used online CAD Onshape,source files are after registration free to copy and modify athttps://cad.onshape.com/documents/cc12e45a4293e021a3dd14cd/w/1abac098ca74a77c46f87ab6/e/64dcefa820798f9954bc56d8
Body and prop guard is printed from ABS 0.15mm resolution,100% infill,it is quite stable and after some crashes i have no issue but if you print it from nylon will be indestructible.Weight
of the ABS printed body is 8.6g.
Box is made from PLA, 0.25mm layer,8% infill.
All parts are designed to be 3d printer friendly,only middle part of the box need some supports in the middle of the part or good bridging capability of the printer.