Crosman 357 and Vigilante .50cal / Nerf Conversion

Last crawled date: 4 years, 3 months ago

This is a shortened Nerf-Dart conversion for Crosman 357 and Crosman Vigilante CO2 Revolvers that bolts in place of the original barrel and bb cylinder.
It restricts the gas flow enough so dart velocity stays under 100fps so it is safe to use indoors.
EVEN THOUGH IT IS NOW FUNCTIONALLY A TOY, IT STILL LOOKS LIKE A GUN. DONT TAKE IT OUT IN PUBLIC, DON'T BE A JACKASS.
To assemble the pieces, you'll need the following hardware:
1x M4x60 socket head screw
2x 604 (RS) ball bearings
I recommend rounding over the bottom/front edges on the break open latch so they will interfere less with the rotation of the cylinder.
The Revolver frame can be modified to make the Drum easily swappable, if you don't want or need that feature, install the drum before mounting the frame piece to the revolver.
If you want to add a (decorative, not functional) barrel to your blaster, you can insert any type of 16mm tubing (I recomment thin walled wire channel tubing).