Cults
Crocodile
by Cults
Last crawled date: 6 years, 2 months ago
Crocodile, from the comic strip by Stephan Pastis.
Crocodile is the main antagonist and villain of the strip. As an inept and inarticulate neighbor of Zebra they he is usually involved in various attempts to kill and eat Zebra, all of which fail.
No supports are required. If you have the right filament colors, no painting is needed.
The completed model is 135mm tall after assembly. This model is in proportion to the Pig and Crocodile models from the comic that I've also posted.
Enjoy!
----------
Print Settings
Printer:
FlashForge Creator X
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.2mm
Infill:
10%
Notes:
See below for helpful printing and assembly tips.
Building the model
Colors (there are no multiple printed pieces)
Black:
eye_blacks
arm_left
arm_right
legs
..
White:
eye_whites
..
Dark green:
body_back
body_front
..
Light green:
belly
..
Yellow:
base (optional)
..
Any color (hidden piece)
body_bumps
Printing and assembly tips
1-No supports are required.
..
2-I used a brim on some pieces, use your discretion based on your own preference:
-arm_left and arm_right are tall curved piece with a very small base.
..
3- For the best looking model be sure to clean your brims thoroughly. All the pieces are sized to fit nicely, providing the brims/squish are cleaned up. This includes the holes for the body_bumps.
..
Assembly tips:
-The diagram below will help in assembling the model and is quite straightforward.
-The model is meant to be glued together.
-Again, take care to ensure that the first layer 'squish' and any added brim is completely cleaned off.
-The eye_whites pieces should be rotated to fit properly. The larger part of the white goes on the top.
-The eye_blacks pieces are interchangeable, there are no left/right differences.
-The model stands nicely on it's own, however a base is included for extra stability if needed.
Crocodile is the main antagonist and villain of the strip. As an inept and inarticulate neighbor of Zebra they he is usually involved in various attempts to kill and eat Zebra, all of which fail.
No supports are required. If you have the right filament colors, no painting is needed.
The completed model is 135mm tall after assembly. This model is in proportion to the Pig and Crocodile models from the comic that I've also posted.
Enjoy!
----------
Print Settings
Printer:
FlashForge Creator X
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.2mm
Infill:
10%
Notes:
See below for helpful printing and assembly tips.
Building the model
Colors (there are no multiple printed pieces)
Black:
eye_blacks
arm_left
arm_right
legs
..
White:
eye_whites
..
Dark green:
body_back
body_front
..
Light green:
belly
..
Yellow:
base (optional)
..
Any color (hidden piece)
body_bumps
Printing and assembly tips
1-No supports are required.
..
2-I used a brim on some pieces, use your discretion based on your own preference:
-arm_left and arm_right are tall curved piece with a very small base.
..
3- For the best looking model be sure to clean your brims thoroughly. All the pieces are sized to fit nicely, providing the brims/squish are cleaned up. This includes the holes for the body_bumps.
..
Assembly tips:
-The diagram below will help in assembling the model and is quite straightforward.
-The model is meant to be glued together.
-Again, take care to ensure that the first layer 'squish' and any added brim is completely cleaned off.
-The eye_whites pieces should be rotated to fit properly. The larger part of the white goes on the top.
-The eye_blacks pieces are interchangeable, there are no left/right differences.
-The model stands nicely on it's own, however a base is included for extra stability if needed.
Similar models
cults
free
Pig
...re no left/right differences.
-the model stands nicely on it's own, however a base is included for extra stability if needed.
cults
free
Rat
...irst glance it seems awkward.
-the model stands nicely on it's own, however a base is included for extra stability if needed.
cults
free
Betty Rubble
...o not put this part in backwards!
5-refer to the assembly diagram for putting the model together. the model is meant to be glued.
cults
free
Wally
...y previous models, you know who you are!). all parts should fit nicely and the only cleanup should be on the first layer, if any.
cults
free
Dogbert
...nto the notch on the body above the nose and glued them into the glasses_arms. it all turned out quite simple to glue into place.
cults
free
George Jetson
...hile putting the model together.
6-refer to the assembly diagram for putting the model together. the model is meant to be glued.
cults
free
Yogi Bear
...lly as per the above explanation.
5-refer to the assembly diagram for putting the model together. the model is meant to be glued.
cults
free
Dilbert
...eces together to create the full tie separately. i suggest attaching the completed tie to the rest of the model as the last step.
cults
free
Lucy van Pelt
...piece for a better fit. 3-the left/right shoulders look similar but are slightly different, so take care when connecting...
cults
free
Barney Rubble
...he head to for full alignment.
..
2-refer to the assembly diagram for putting the model together. the model is meant to be glued.
Crocodile
cults
free
Crocodile
...crocodile
cults
crocodile
crocodile
cults
free
Crocodile Skull
...crocodile skull
cults
crocodile skull
crocodile skull
cults
free
Crocodile Medallion
...crocodile medallion
cults
crocodile medallion
crocodile medallion
cults
$4
Ramiro the Crocodile
...dprin cartoon crocodile 3d 3dmodel 3dprint decor toy animal reptile
model for fun the first model first in a set of characters :)
cults
free
Crocodile, wip
... in the middle for printing.
the goal is to have a head (and tail) moving from bottom to top. the other members in mortise tenon.
cults
free
crocodile clips by orangeteacher upate
...crocodile clips by orangeteacher upate
cults
crocodile by orangeteacher upate clips
crocodile clips by orangeteacher upate
cults
$10
Pretty Crocodile
...39;t be afraid, it's a pretty crocodile with a mobile jaw.
in two part for a better adjustment.
approximately 15 cm length.
cults
free
Crocodile Head
... bad boys for the foyer. never a dull moment with the crocodile head in the room.
designed by freshfiber: https://freshfiber.com
cults
free
Twists & bends crocodile by orangeteacher
...codile by orangeteacher
cults
crocodile twists & bends by orangeteacher
twists & bends crocodile by orangeteacher
cults
free
Crocodile
... download this 3d printer file and make it with 3d printing. let’s enjoy!
this 3d model was originally shared on poly by google.