Thingiverse
Crevice Tool by smorgana
by Thingiverse
Last crawled date: 3 years, 1 month ago
I made this because we didn't have a crevice tool to fit our main vacuum. I designed it to fit the tapered end of a vacuum extension that goes from 31.85mm diameter down to 30.6mm over a length of 30mm. I gave it some slack, but then it ended up with a loose fit. A layer of gaffers tape on the inside of the crevice tool made it a snug fit. the total height of the tool is 195mm to fit vertically in an Ultimaker 2.
I printed it with a .4 nozzle, .15 layers, 18% infill.. and it seems very sturdy.I used brim to make sure it adhered well to the build plate because the walls are only 2mm thick. I printed in PLA which has great layer bonding... I doubt it would work in ABS, unless you know how to avoid layer cracking on tall objects.
I printed it with a .4 nozzle, .15 layers, 18% infill.. and it seems very sturdy.I used brim to make sure it adhered well to the build plate because the walls are only 2mm thick. I printed in PLA which has great layer bonding... I doubt it would work in ABS, unless you know how to avoid layer cracking on tall objects.
Similar models
thingiverse
free
Vacuum Adapter For Festool Dust Collector by goyousalukis
...heck that it fits your hose. you can also test the small end by flipping the adapter in your slicer to print the small end first.
thingiverse
free
Vacuum Connectors by gb3d001
...tor and small crevice tool.
the insides are tapered to allow for greater fitment.
scale up or down to fit your own appliances
thingiverse
free
Dyson V6 Wedge/Crevice tool
...dyson v6 wedge/crevice tool
thingiverse
made this to replace the crevice tool for my dyson v6 vacuum
thingiverse
free
Dyson V7/V8/V10/V11 Crevice tool by Delphic
...hly just like the original attachments.
i used pla at 0.2mm layer height and 25% infill
print vertically with raft. 148mm height.
thingiverse
free
Vacuum Cleaner Crevice Tool
...t just fit almost anything if scaled appropriately.
video demonstration available at: https://www.youtube.com/watch?v=vt07zhr_fi8
grabcad
free
Dyson crevice tool
...dyson crevice tool
grabcad
crevice tool used with dyson handheld vacuum, such as dc34
thingiverse
free
Crevice nozzle to suit Dyson Vacuum
...crevice nozzle to suit dyson vacuum
thingiverse
replacement crevice tool, created for my dc08 vacuum.
thingiverse
free
Dyson Crevice Tool (v7, v8, v10) by mylarshoe
...v7, v8, v10) by mylarshoe
thingiverse
this is a remix of the dyson crevice nozzle to fit the dyson v7, v8, and v10 stick vacuum.
thingiverse
free
Vacuum Crevice Tool with Tip by maverickf
...ol with tip so it's easier to scratch the dust in the grille of the vent. i am using it on my bissell, tube diameter is 35mm.
thingiverse
free
Crevice tool for Grundig vacuum cleaner
...cleaner
thingiverse
crevice tool for grundig battery-powerd vacuum cleaner.
freecad file is also available for own modification.
Smorgana
thingiverse
free
Pencil Can by smorgana
...pencil can by smorgana
thingiverse
a simple pencil can. for mine i further decorated it with a 3d pen.
thingiverse
free
Bud Vase by smorgana
... smorgana
thingiverse
a smal bud vase.
i printed this for pla with .1 layers and it took 7 hours.
you can print without supports
thingiverse
free
Heart Bookmark by smorgana
... it is 1.1mm thick and worked well printed in pla. i used a .4mm nozzle and .1 layers. it took a bit over 2 hours to print.
thingiverse
free
Book Pencil Clip by smorgana
...a
thingiverse
a pencil clip you can hot glue to your notebook so you always have a pencil handy.
works for a 7mm diameter pencil
thingiverse
free
Angel by smorgana
...ngs, try the thicker wings.
you should print this with 100% infill. the design is already hollow, with walls about 3mm thick...
thingiverse
free
Circle Drawing Guide by smorgana
...ngiverse
a guide for drawing circles. nominal sizes are 3, 2, 1, 1/2 and 1/4 inches. sides can also be used as a straight edge.
thingiverse
free
Protractor by smorgana
...ith 45 degrees marked also.
bottom edge serves as a straight edge, and 6 inch rule.
i made this as my first project in freecad...
thingiverse
free
Fancy Door Stop by smorgana
...works fine to print at 50% infill and you should use supports "everywhere" in order for the side cutouts to print well.
thingiverse
free
Tiny Container by smorgana
...be just snug enough.
the outside dimension is 24mm in diameter. the inner diameter is 16 mm in diameter.
closed it is 20mm high.
Crevice
thingiverse
free
Shopvac Crevice Tool Nozzles by Droneme
...erse
assortment of tips for the shopvac crevice tool. use with the shopvac crevice tool http://www.thingiverse.com/thing:483682
thingiverse
free
Crevice nozzle to suit Dyson Vacuum
...crevice nozzle to suit dyson vacuum
thingiverse
replacement crevice tool, created for my dc08 vacuum.
thingiverse
free
Dyson V6 Wedge/Crevice tool
...dyson v6 wedge/crevice tool
thingiverse
made this to replace the crevice tool for my dyson v6 vacuum
thingiverse
free
Customizable vacuum cleaner crevice by derbenni
...customizable vacuum cleaner crevice by derbenni
thingiverse
this crevice can be customized to fit virtually any vacuum cleaner.
thingiverse
free
Vacuum cleaner car crevice by Project2571
...leaner car crevice by project2571
thingiverse
vacuum cleaner crevice for helping cleaning on tight spots inside car beside seats
thingiverse
free
Crevice tool for Grundig vacuum cleaner
...cleaner
thingiverse
crevice tool for grundig battery-powerd vacuum cleaner.
freecad file is also available for own modification.
thingiverse
free
Vacuum Crevice by rema
...vacuum crevice by rema
thingiverse
this thing suck, literally.
(pipe inner diameter 30.9mm / outer 31.9mm, can be scaled easily)
thingiverse
free
Dyson Narrow Crevice Tool by GreatOldOne
...ngiverse
a narrow (6mm wide) crevice tool for dyson handheld.
fits my dyson v11, but i believe this will fit any dyson handheld.
thingiverse
free
Crevice Tool - Electrolux Ultrasilencer Zen by Fvuong
...r zen by fvuong
thingiverse
crevice tool for electrolux ultrasilencer zen. fusion360 file is available if you want to modify it.
thingiverse
free
Vacuum Crevice Tool with Tip by maverickf
...ol with tip so it's easier to scratch the dust in the grille of the vent. i am using it on my bissell, tube diameter is 35mm.
Tool
turbosquid
$21
Tool box with tools
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
archibase_planet
free
Tools
...tools
archibase planet
tools instruments implements
tools n070114 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.
3d_ocean
$12
Tools
...tools
3docean
hammer metal old screw tools wrench
maya
turbosquid
$6
Tool Cart / Tool Box
...
royalty free 3d model tool cart / tool box for download as on turbosquid: 3d models for games, architecture, videos. (1241859)
3d_ocean
$15
crimp tool
... tool copper cutter crimp crimp tool electrical electrical tools press tools pressing tool tools wire cutter
created in maya 2013
3d_ocean
$5
Tools
...tools
3docean
3d models paint tools work
3d,models,works,paint,art,create,working,
3d_export
free
tools
...tools
3dexport
coldsteel
turbosquid
$15
Tools
...turbosquid
royalty free 3d model tools for download as blend on turbosquid: 3d models for games, architecture, videos. (1331352)
3ddd
$1
bar tool
...bar tool
3ddd
барный
bar tool
turbosquid
$35
tools
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.