Thingiverse
Creality CR-10 Bed Stabilizer by Riff_Raff
by Thingiverse
Last crawled date: 3 years, 1 month ago
Fixes 3 major problems with the heated bed on the Creality CR-10.
The bed support springs are in contact with the aluminium bed and in my case touches one of the heater traces. Eventually it will short out the heater.
When the bed is set to 0.2 mm height from the hot end the springs have very little tension
The bed will wobble on the springs in the original configuration.
Solution:
Provides a 2mm pad between the spring and the Heated Bed.
Compresses the springs by an additional 4 mm
Provides a low tolerance guide for the bed to be adjusted and thus eliminates all bed wobble.
The bed support springs are in contact with the aluminium bed and in my case touches one of the heater traces. Eventually it will short out the heater.
When the bed is set to 0.2 mm height from the hot end the springs have very little tension
The bed will wobble on the springs in the original configuration.
Solution:
Provides a 2mm pad between the spring and the Heated Bed.
Compresses the springs by an additional 4 mm
Provides a low tolerance guide for the bed to be adjusted and thus eliminates all bed wobble.
Similar models
thingiverse
free
CR-10S Bed Heater Cable Holder by remberto
...turdy mount for the older versions of the creality cr-10s that did not ship with a cable support on the back of the bed/heater.
thingiverse
free
Universal Heated Bed Handle
...creality cr-10s".
in theory, they fit all fdm 3d printers that have a 300 x 300 mm heated bed with a hole spacing of 240 mm.
thingiverse
free
Creality CR-X Bed Levelling Spring Guides
....
do they make a difference? ...maybe... a little bit... but... nothing beats setting the bed up correctly in the first place...
thingiverse
free
Creality cr-10 heatbed camera mount by xonix85
...creality cr-10 heatbed camera mount by xonix85
thingiverse
clips on to heat bed, print with support
thingiverse
free
Creality CR-10 PSU frame mount by agniusm
...creality cr-10 psu frame mount by agniusm
thingiverse
to mount psu under heat bed.
thingiverse
free
CR-10 MINI Bed Connector Strain Relief by itslow
...t bed, or spring and y-axis sled, with spring in counter-bore. install retaining screws and level bed as per standard procedure.
thingiverse
free
Creality CR-10 MINI Strain relief bracket for heated bed cable by Olesmokie
...place, move the wires a bit toward the bed (to avoid to put too much tension in them) and hold the wire in place with 2 zip ties.
thingiverse
free
Weel for Bed leveling creality CR-10 S by SVIVAR
...eveling creality cr-10 s by svivar
thingiverse
weel for mounting on existing nut . for creality cr-10s . for leveling print bed
thingiverse
free
CR-10 / CR10S Heated Bed Spring Tensioner Washers by notdave
...e bed was wobbly and print quality suffered.
these little washers increased the spring tension and made the bed much more stable.
thingiverse
free
Creality CR-10 Heated Bed Strain Relief Remix by nmsr1196
... allows you to position the strain relief on the bed with a binder clip. you have to use the 25mm binder clip, not the 19mm clip.
Raff
3d_export
$10
Midj Raff Chair 3D Model
...ort
interior modern vray midj chair raff office dining room living restaurant italy
midj raff chair 3d model @lexs 76340 3dexport
3ddd
free
Стул
...стул 3ddd midj , raff стул фабрики midj, raff s...
3dbaza
$3
RAFF chair (341061)
...ed shape, which appears in the latest trends in furniture design. material of the leg is chrome steel and the backrest is leather
thingiverse
free
RHPS - Riff Raff Ray Gun V2 by richardcampbell1976
...rhps - riff raff ray gun v2 by richardcampbell1976
thingiverse
multi part ray gun for riff raff space suit costume.
3dbaza
$3
Midj Raff T /S /L chair (345185)
...midj raff t /s /l chair (345185)
3dbaza
midj raff t /s /l chair 3d model <br>made to measure
thingiverse
free
base fuente micro-ATX by raff
...fuente micro-atx by raff
thingiverse
this thing was made with tinkercad. edit it online https://tinkercad.com/things/4pzkmgrshad
thingiverse
free
soporte ventilador orientable 40mm by raff
... orientable 40mm by raff
thingiverse
this thing was made with tinkercad. edit it online https://tinkercad.com/things/adct78qdzxv
thingiverse
free
Honeycomb by riff-raff
...many as you need to mach your frame size. spacing should be 0,5-0,7 mm
i made a dadant us print plate for center walls with this.
thingiverse
free
Cigarette Roller Helper by riff-raff
... little helper to stuff your own cigaretts with a suffing machine and loose tabacco.
for machines with a internal size of 6x67 mm
3dbaza
$2
Joan Gaspar Resol - RAFF coffee table (345384)
...odel. turbosmooth optional<br>models in 3ds max 2015 and 3ds max 2018<br>all objects - editable poly - vray material
Riff
thingiverse
free
Argentina Riff Rock Llavero Keychain by FedeLuases
...argentina riff rock llavero keychain by fedeluases
thingiverse
llavero riff pappo
3dbaza
$4
Norr11 by Riff sofa (336053)
...t;br>rif | sofa by norr11<br>collection<br>riff<br>type<br>sofa<br>production year<br>2020
thingiverse
free
RHPS - Riff Raff Ray Gun V2 by richardcampbell1976
...rhps - riff raff ray gun v2 by richardcampbell1976
thingiverse
multi part ray gun for riff raff space suit costume.
thingiverse
free
Honeycomb by riff-raff
...many as you need to mach your frame size. spacing should be 0,5-0,7 mm
i made a dadant us print plate for center walls with this.
3dbaza
$4
RIFF sofa (302462)
...;br>xform: yes<br>box trick: yes<br>model parts: 10<br>render: vray<br>formats: 3ds max 2017, obj, fbx
thingiverse
free
Cigarette Roller Helper by riff-raff
... little helper to stuff your own cigaretts with a suffing machine and loose tabacco.
for machines with a internal size of 6x67 mm
3dbaza
$4
NORR11 RIFF Sofa (331546)
...;br>xform: yes<br>box trick: yes<br>model parts: 6<br>render: v-ray<br>formats: 3ds max 2017, obj, fbx
thingiverse
free
corn can cap by riff-raff
...ans (~85 mm in diameter)
inspired by emericas design, just a little different. there is a litte notch for better grip on the can.
thingiverse
free
CubeAnet8 Z rail holder by riff-raff
... holder for cubeanet8 project. i increased the size of m3 nut insertion for easier handling. i recommend using self locking nuts.
thingiverse
free
Clip for KIS Bi Box by riff-raff
... 3d printers filament drybox.
when buying a kis bi box, try to choose one with even lid, pick up some p-profile tape for sealing.
Creality
turbosquid
$7
filament roller single print creality
...del filament roller single print creality for download as stl on turbosquid: 3d models for games, architecture, videos. (1619309)
3d_export
free
Creality ender enclosure webcam mount
...e creality enclosure. sure is better than a tripod. change it up if it helps. i printed pla with 50% infill on my dd ender 3 pro.
3d_export
free
ender 3 frame cavity covers
...3 inserts,<br>made these inserts for the framework of the creality ender 3 - makes it look a bit more...
3d_export
$42
excavator
...width is the original size. 0.12 mm printing surface creality ender-5...
3d_export
free
ender 3 3d print bed clips
...glass bed + normal aluminium bed frame of the creality ender 3 = 6mm (b) these clips are designed...
3d_export
free
ender 3 enclosure corners
...that i could build my enclosure frame for my creality ender 3 - so i printed them in a...
thingiverse
free
Toolbox Creality
...ingiverse
this is a toolbox for tools that comes with creality printers, with a guide to cut capricorn ptfe with a cutter blade.
thingiverse
free
Creality Hotend Plate
... from creality themselves as the ender 3 is open source. this means i did not create this design and all credit goes to creality.
thingiverse
free
Creality Cat by alexander125
...creality cat by alexander125
thingiverse
this is the cat that comes on the sd card for all creality 3d printers.
thingiverse
free
Creality Dog by alexander125
...creality dog by alexander125
thingiverse
this is the dog that comes on the sd card for all creality 3d printers.
Cr
turbosquid
$15
Creazioni CR-673 CR-4461
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Ravak CR 055.00
...ravak cr 055.00
3ddd
ravak , смеситель
ravak cr 055.00
turbosquid
$100
CR-002
...
turbosquid
royalty free 3d model cr-002 for download as stl on turbosquid: 3d models for games, architecture, videos. (1686037)
3ddd
$1
Ravak CR 012.00
...ravak cr 012.00
3ddd
ravak , смеситель
смеситель ravak cr 012.00
3ddd
free
Консоль CR Currin
...ь , cr currin
консоль cr currin
ширина - 1675 мм
глубина - 510 мм
общая высота - 810 мм
3ddd
$1
CR 39444
...0
диаметр: 100
тип патрона: gu5,3 gu10
количество ламп: 1
мощность: 35w
цвет: золото хрусталь
материал: металл хрусталь exclusive
3d_ocean
$89
Honda CR-Z
...www.youtube.com/watch?v=rrbb4d4lypk ` he honda cr-z‘s exterior styling is formed around a “one-motion wedge” concept with a lo...
3ddd
$1
Creazoni / STEFY CR-8901
...creazoni / stefy cr-8901
3ddd
creazoni
creazioni stefy cr-8901
turbosquid
$60
Chain-CR-001
...squid
royalty free 3d model chain-cr-001 for download as stl on turbosquid: 3d models for games, architecture, videos. (1680536)
turbosquid
$99
Honda CR-Z
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Stabilizer
3d_export
$5
Stabilizer 3D Model
...stabilizer 3d model
3dexport
stabilizer dashpot
stabilizer 3d model gaj15 60446 3dexport
turbosquid
$1
Steadicam Stabilizer
...oyalty free 3d model steadicam stabilizer for download as ipt on turbosquid: 3d models for games, architecture, videos. (1306615)
3d_export
free
Download free Stabilizer 3D Model
...download free stabilizer 3d model
3dexport
stabilizer electronics
stabilizer 3d model umairahmad555 35737 3dexport
3d_export
$23
stabilized moss and mirrors
...smoothing modifier is turned off by default. for close-ups, apply turbosmooth 1 iteration (turbosmooth is in the modifiers stack)
3d_export
$13
stabilized moss - world map
...level in the anti-aliasing modifier. the stack is open.<br>file export for anti-aliasing. apply the anti-aliasing modifier.
3d_export
$12
stone panels and stabilized moss
...in the scene).<br>all elements are made as separate objects, you can place them in any order<br>good renders for you!
3d_export
$13
wooden panels and stabilized moss
...r a particular frame. the anti-aliasing modifier is turned on (display in the viewport - 0 iterations, on the render 1 iteration)
3d_export
$13
stabilized moss 2
...or a particular frame. the anti-aliasing modifier is enabled (display in the viewport - 0 iterations, on the render 1 iteration).
3d_export
$13
stabilized moss 3
...level in the anti-aliasing modifier. the stack is open.<br>file export for anti-aliasing. apply the anti-aliasing modifier.
3d_export
$18
bouquet collection of dried flowers in a vase 181
...atural decor dry reed dried flowers, dry grass. dry, stabilized, painted stems, dried pods, natural decor cyperus papyrus cyperus
Bed
3ddd
$1
bed
...bed
3ddd
bed , постельное белье
bed
3ddd
$1
bed
...bed
3ddd
bed , постельное белье
bed
3ddd
$1
bed
...bed
3ddd
bed , постельное белье
bed
3ddd
$1
bed
...bed
3ddd
bed , постельное белье
bed
3ddd
$1
bed
...bed
3ddd
bed , постельное белье
bed
3ddd
$1
bed
...bed
3ddd
bed , постельное белье
bed
3ddd
free
bed
...bed
3ddd
bed , постельное белье
bed
3ddd
free
bed
...bed
3ddd
bed , постельное белье
bed
3ddd
$1
Bed
...bed
3ddd
bed , постельное белье , постель
bed
3d_export
$7
bed adairs bed
...rs bed
3dexport
bed adairs bed in modern style. if you want a smoother surface, please turn on turbosmooth in the modifier list.
10
turbosquid
$25
10
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
a-10
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
EX 10
...ex 10
3ddd
samsung , фотоаппарат
ex 10
3ddd
$1
Bed 10
...bed 10
3ddd
постельное белье
bed 10
evermotion
$25
Scene 10 Archinteriors vol. 10
...dering design interior
take a look at textured and shadered visualization scene ready to be rendered.. evermotion 3d models shop.
3ddd
$1
Curtains 10
...curtains 10
3ddd
curtains 10
3ds max 2011,fbx + textures
polys: 100355
3ddd
free
PLANTS 10
...plants 10
3ddd
цветок , горшок
plants 10,, with 3 different color planter boxes
turbosquid
$24
Chandelier MD 89310-10+10 Osgona
... chandelier md 89310-10+10 osgona for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1218762)
design_connected
$29
Nuvola 10
...nuvola 10
designconnected
gervasoni nuvola 10 computer generated 3d model. designed by navone, paola.
design_connected
$22
Kilt 10
...kilt 10
designconnected
zanotta kilt 10 computer generated 3d model. designed by progetti, emaf.