Thingiverse
CR10 Mini LACK Enclosure (Prusa Enclosure Remix) by ReadySetJoe
by Thingiverse
Last crawled date: 3 years, 3 months ago
I remixed the Prusa Lack enclosure as the original design doesn't fit a CR-10 Mini. I made some tweaks to the design so it would be a bit more sturdy and modified the doors so they can open on two sides (front and left) to allow for easier filament changing.
I haven't yet put the plexiglass in but the measurement for those pieces will be as follows:
H: 545 mm (21.457 in)
W: 440 mm (17.323 in)
Thickness: 3 mm (.118 in)
Here's a link to a spreadsheet I put together with some of my calculations. Apologies if I didn't show some of my work.
Currently planning on using a foam board for the back 'window' and cutting a small hole to run the cables out through. I'll use 3 pieces of plexi for the other windows.
I'm still figuring out what I want to do with the control box and wires. As is, the cables don't run far enough to put it on top of the enclosure. I'm thinking I'll be doing away with the OEM control box and mounting the printer's brains underneath in a different box and extending some cables to allow the LCD to be top so I can access it without opening the enclosure. Those designs are still a work in progress.
I haven't yet put the plexiglass in but the measurement for those pieces will be as follows:
H: 545 mm (21.457 in)
W: 440 mm (17.323 in)
Thickness: 3 mm (.118 in)
Here's a link to a spreadsheet I put together with some of my calculations. Apologies if I didn't show some of my work.
Currently planning on using a foam board for the back 'window' and cutting a small hole to run the cables out through. I'll use 3 pieces of plexi for the other windows.
I'm still figuring out what I want to do with the control box and wires. As is, the cables don't run far enough to put it on top of the enclosure. I'm thinking I'll be doing away with the OEM control box and mounting the printer's brains underneath in a different box and extending some cables to allow the LCD to be top so I can access it without opening the enclosure. Those designs are still a work in progress.
Similar models
thingiverse
free
Small cable pocket for Ender3 LACK by Gazis
...9;t bring out whole enclosure so much from wall.
i also recommend cable chains for wires as they will direct cables to this part.
thingiverse
free
Lack leg combiner by Boaslingeman
...n enclosure for my ender 5. the ender 5 was too high for the original prusa enclosure, so i made the legs longer with this piece.
thingiverse
free
Prusa Heatbed Cable Cover by medyk3D
...ke on prusa i3 mk3s heatbed cable cover.
i remixed the angled version so my printer fits better to the ikea lack table enclosure.
thingiverse
free
SKR Controller box model 3.3 for SKR 1.3/4 and Pi 3 on Lack Enclosure
...e other models in the original. you can find the skr 1.4 model (used to work out where the cutouts go) on the bigtreetech github.
thingiverse
free
1x1 Box with 2x2 Grid by bleibohne
... the grid of the original boxes, so i didnt fixed it.
printed with a prusa mini and 0.2mm layer heigth. print time was about 3h
thingiverse
free
Lack Cable Pass–Through by bmonty
...;m using this part to route the printer's main control cable to the bottom of the table where i have the control box mounted.
thingiverse
free
3DUpfitters Prusa Enclosure Riser - With power supply cable cutout by henryci
...n of those two pieces with some space cut away to fit the grommet.
this is set for one inch in height. if you need more than that
thingiverse
free
Prusa Lack Enclosure 2 Ball Camera Mount by joeltrondotcom
...ert between the screws and existing enclosure supports.
also included is a version for a cable tie, to secure those nasty cables.
thingiverse
free
Prusa Mini anti vibration feet by rasssta
...n from https://www.thingiverse.com/thing:4079300 to create the box feet but i can't add it as a remix source for some reason.
thingiverse
free
Original Prusa i3 MK3 ENCLOSURE -Ikea Lack table Individual Top Parts by rm04s
...rusa lack enclosure as i couldn't fit the original file with all parts in my printer due to arrangement of the original file.
Readysetjoe
thingiverse
free
Dashcam Mount by ReadySetJoe
... only enough to tightly secure the mirror to the backplate. if you overtighten, you'll break through the bottom of the mount.
thingiverse
free
Google / Nest Home Mini Stand (Cat Edition) by ReadySetJoe
...ncluded the step and fusion files along with the stls should anyone want to customize further or improve it.
i hope you enjoy! :d
Cr10
thingiverse
free
Clips for Ender 3, CR10, CR10S
.... maybe others, but only been tested with these.
these clips makes a tight fit, so that the cable and bowden tube stays in place.
thingiverse
free
X-axis endstop offset for cr10 cr10s Ender 3
...x-axis endstop offset for cr10 cr10s ender 3
thingiverse
x-axis endstop offset for cr10 cr10s ender 3
thingiverse
free
Filament Sensor CR10
...or cr10
thingiverse
remix of the sensor with fixation in order to face directly the extruder and ptfe tube
cr10, cr10s ender3...
thingiverse
free
Fan V4 CR10/CR10S Ender3 Versione 4 by creativesolutions-lab
...fan v4 cr10/cr10s ender3 versione 4 by creativesolutions-lab
thingiverse
fan v4 cr10/cr10s versione 4
thingiverse
free
CR10 Feet by Leighton417
...cr10 feet by leighton417
thingiverse
this is a cr10 feet for people who have short table width.
thingiverse
free
Dremel Attachment for CR10, Ender 3, Cr10s by Conn22_43
...verse
a bracket to hold a dremel onto any ender 3, cr10 bracket. i printed it in petg, but it can be made in any rigid material.
thingiverse
free
CR10S-Plus Hotend by scorpio_man30ro
...cr10s-plus hotend by scorpio_man30ro
thingiverse
cr10s-plus hotend
thingiverse
free
Leveling knob CR10 by JMJacques
...leveling knob cr10 by jmjacques
thingiverse
leveling knob cr10
thingiverse
free
Soporte Superior sensor filamento CR10 v2 - CR10 v3 by Guimir
...3 by guimir
thingiverse
soporte sensor de filamento guia superiror tipo cr10 v3 para convertir la cr10 v2 en extrusión directa.
thingiverse
free
Ultimate cr10/cr10s Bed Leveling Knob by neo42487
...so they remain where you set them indefinitely.
it s a remix of this piece https://www.thingiverse.com/thing:4743835 but for cr10
Lack
thingiverse
free
STACK-A-LACK by jangrewe
...oublestack-a-lack plates.
the rack-a-stack-a-lack plate contains the adapters for all four corner and the two middle connectors.
thingiverse
free
To raise your LACK box with 2 LACK tables by RugbyGoth
...k box with 2 lack tables by rugbygoth
thingiverse
just a little thing to be able to raise your lack box with an other lack table
thingiverse
free
Lack Stacker by Ivysore
...firmly in place so that it cannot slide off of whatever it is set onto. does not prevent the lack from being lifted out of place.
thingiverse
free
Ikea Lack Verbinder / Joiner
...ikea lack tischverbinder, zum verbinden zweier ikea lack tische.
ikea lack table connector, for connecting two ikea lack tables.
thingiverse
free
Lack Grommet
...lack grommet
thingiverse
metric - 50 mm.
thingiverse
free
Lack table foot
...lack table foot
thingiverse
four of these are required for fixing one lack table on top of another
thingiverse
free
Loquet Lack by Clement_Fasquel
...loquet lack by clement_fasquel
thingiverse
loquet pour caisson lack
https://www.youtube.com/watch?v=ffvl5cv8_cw
thingiverse
free
IKEA LACK FEET
...ikea lack feet
thingiverse
hey,
this is a simple feet for ikea lack table. fits perfect ;-)!
greetings
thingiverse
free
LACK - Filament by HengNing90
...lack - filament by hengning90
thingiverse
just screw it through your ikea-lack-table and put the filament through
thingiverse
free
Lack Table stacker
...lack table stacker
thingiverse
to stack two lack tables. made one with and one without holes for a screw.
Enclosure
thingiverse
free
Enclosure by KlimukVI
...enclosure by klimukvi
thingiverse
enclosure
thingiverse
free
Enclosure by silverfox
...enclosure by silverfox
thingiverse
trial enclosure
thingiverse
free
Enclosure
...enclosure
thingiverse
designed in catia
thingiverse
free
Enclosure
...enclosure
thingiverse
designed in catia
thingiverse
free
Enclosure
...enclosure
thingiverse
designed in catia
thingiverse
free
Enclosure
...enclosure
thingiverse
designed in catia
printed in hydra
thingiverse
free
Enclosure
...enclosure
thingiverse
designed in catia
printed in hydra
thingiverse
free
Enclosure Handle
...enclosure handle
thingiverse
handle for the plexiglass enclosure door for my cr-10.
thingiverse
free
Switch enclosure
...switch enclosure
thingiverse
switch enclosure as used in this youtube video
space in base for d1 mini
thingiverse
free
majikatek enclosure by ellenlangsetmo
...ure electronics enclosure for my electronics prodject the size of the enclosure is 22 x 14 inches by 2 and three quarture inches.
Prusa
thingiverse
free
Prusa without Prusa (rc2) by madless
...prusa without prusa (rc2) by madless
thingiverse
just the main part of prusa rc2 faceshield, without writing.
enjoy :)
thingiverse
free
Prusa by acejbc
...prusa by acejbc
thingiverse
prusa knob info
m3 8mm screw
thingiverse
free
Prusa house
...prusa house
thingiverse
how prusa house could look like...
thingiverse
free
Prusa Mk2 "Fake Prusa" LCD cover by anraf1001
...r by anraf1001
thingiverse
version of prusa's lcd cover with "fake prusa" instead of "original prusa"
thingiverse
free
Prusa stabilizator by gutiueugen
...prusa stabilizator by gutiueugen
thingiverse
prusa stabilizator
thingiverse
free
Keychain Prusa by rbarbalho
...keychain prusa by rbarbalho
thingiverse
keychain with text prusa.
thingiverse
free
remake of Prusa Mini
...remake of prusa mini
thingiverse
remake of prusa mini
thingiverse
free
Prusa i3 by plangdon
...prusa i3 by plangdon
thingiverse
files for prusa i3
thingiverse
free
Mini Prusa (Prusa Mate) by neil3dprints
...cify which colors are required and if color changes are needed as well as heights to apply the color changes.
happy printing. :-)
thingiverse
free
prusa i3 ??? ???? by jellyalex978
...prusa i3 ??? ???? by jellyalex978
thingiverse
prusa i3 ??? ????
m8 60mm
m6 ???
Mini
thingiverse
free
mini castle mini mini golf by EdisonM
...mini castle mini mini golf by edisonm
thingiverse
play able with ball and putter in the "mini mini golf" model
thingiverse
free
Mini Clothesline - Mini Tendal
...mini clothesline - mini tendal
thingiverse
mini clothesline
mini tendal
thingiverse
free
mini mini golf by EdisonM
...mini mini golf by edisonm
thingiverse
actually playable mini mini golf course with putter and ball
thingiverse
free
Mini Schleuder / Mini Slingshot by Ju5tMak3
...mini schleuder / mini slingshot by ju5tmak3
thingiverse
mini schleuder / mini slingshot
have fun
thingiverse
free
mini bomba (mini pump) by neemiasmiranda
...mini bomba (mini pump) by neemiasmiranda
thingiverse
mini bomba
thingiverse
free
MINI by shteffs
...mini by shteffs
thingiverse
mini
thingiverse
free
Mini wrist, Mini poignet by Aleoduc74
...mini wrist, mini poignet by aleoduc74
thingiverse
mini poignet pour vitre ou petit meuble.
thingiverse
free
Mini Bat
...mini bat
thingiverse
mini bats.
thingiverse
free
Mini-Windeisen
...mini-windeisen
thingiverse
mini-windeisen
thingiverse
free
Mini cadeira
...mini cadeira
thingiverse
mini cadeira
Remix
thingiverse
free
Extruder Spinner Remix of Remix of Remix
...d
feel free to print or remix and don't forget to post it.
if you find it useful you can send tip or buy me a coffe. thanks.
thingiverse
free
Predator mask (remix of remix)
...predator mask (remix of remix)
thingiverse
just cool mask :)
thingiverse
free
REMIX by nbvgbbvv
...remix by nbvgbbvv
thingiverse
remix
thingiverse
free
remix by Alejandragr
...remix by alejandragr
thingiverse
remix
thingiverse
free
remixed by mkj
...remixed by mkj
thingiverse
this is remix comment
thingiverse
free
UK Remix of a Remix by ukcat
...for a big kentucky wildcats' fan birthday!
update 3/18/14: uploaded a version with the uk stuff, but no initials at bottom.
thingiverse
free
Remix Mystery
...remix mystery
thingiverse
this is for a class remix assignment.
thingiverse
free
Slight Remix of Tundra Remix by PyrOverkill
...pyroverkill
thingiverse
slight modification of the my remix of the bakflip handle. better resolution on the name plate and logo.
thingiverse
free
Arrowhead Remix
...arrowhead remix
thingiverse
remixing my og arrowhead
thingiverse
free
Remix Project
...remix project
thingiverse
this is my submission for the thingiverse remix project.