CR-10s Standalone "Matador Edition" by matador

Last crawled date: 4 years, 1 month ago

This project has taken me quite a while to finish. I have remixed several things and have used several things as inspiration for this project and It will take me a while to remember what things they are and who to thank for inspiration, so be patient while I continue to update this project to give proper mentions and thanks.
The build should be pretty self explanatory. 2020 extrusion for frame and Z support. I used 1/4 ABS Sheet inserted into the extrusion to keep electronics safe. 2020 extrusion hinges on the back for quick and easy access to electronics. 5050 White LED's in aluminum channel attached with Velcro wire management tape.
I also used CR10s extension cables to which are required for this build. I did not post a link to them because I was shipped the wrong ones and the only cables that worked were the extensions for the bed and hot end. So as you can see in the pics I routed some of the cables through a panel on the left side of the base. If I had the proper extension cables I would run them all through the back of base with the rest of the cables.
As for the parts that build the walls of the base you need the following:
60mm_support_Front_corner_mk2.stl One for each corner
150mm_angle_vent_panel_mk2.stl Two for each side
85mm_center_support_side_panel.stl One needed for each side
back_panel_mk1.stl This is the only piece you need for the back
display_mk5.stl This is the only piece you need for the front
CR-Board-Mount-mk4.stl - This mount will fit both the stock CR10s print controller and the TH3D EZBoard
Post any questions or let me know what you think in the comments below. Thanks :)
Upgrades to come:
Linear rails for X, Y, and Z axis
Drag Chains for X, Y, and Z cables
NON-PRINTED UPGRADES:
TH3D EZABL PRO auto bed level system - https://www.th3dstudio.com/product/ezabl-pro-plug-print-auto-bed-leveling-kit/
TH3D EZBoard 32bit print controller with trinamic drivers - https://www.th3dstudio.com/product/ezboard-lite/
TH3D EZFlex2 magnetic PEI print surface - https://www.th3dstudio.com/product/ezflex2-flexible-print-system/
Bondtech DDS For Creality3D CR-10S - https://www.bondtech.se/en/product/direct-drive-upgrade-kit-creality3d-cr10s/
MeanWell AC to 5v DC power supply for Pi3 OctoPrint Server - https://www.amazon.com/gp/product/B005T6UJBU/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
External Mosfet for heatbed - https://www.amazon.com/gp/product/B07C4PGXFK/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1
DC regulator used as on/off/dimmer for 5050 LED strips - https://www.amazon.com/gp/product/B075FN4H37/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
120mm Noctua Fan 12v - https://www.amazon.com/gp/product/B00650P2ZC/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
60mm Noctua to replace fan in main 12v Mean Well power supply - https://www.amazon.com/gp/product/B009NQMESS/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1
40mm Noctua for Mosfet - https://www.amazon.com/gp/product/B009NQLT0M/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
Squash Balls for feet - https://www.amazon.com/gp/product/B01NBLQ12U/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
Micro SD to Full SD extension adapter - https://www.amazon.com/gp/product/B06X3Y4BBB/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
Hinges for 2020 Extrusion - https://www.amazon.com/gp/product/B07PXWCXVF/ref=ppx_yo_dt_b_asin_title_o01_s02?ie=UTF8&psc=1
INSPIRATIONS, REMIXES, AND OTHER THINGS:
The biggest Inspiration was https://www.thingiverse.com/thing:3336912 I "borrowed" his idea to use 2020 extrusion to build a taller frame to install all the electronics in. Although his use of drag chains makes a much cleaner look. :) I will be using drag chains soon when I figure out a way to connect one to the Bondtech DDS extruder mount.
This is the mount I used to attach the EZABL probe to the Bondtech Direct Drive Extruder - https://www.thingiverse.com/thing:3673301
This is the spool holder i used - https://www.thingiverse.com/thing:2846383
The Squash Ball feet was one I remixed but I cant find the original thing anymore. Ill keep looking. :)