Thingiverse
CR-10 FANG OEM fan duct assembly - easy & sturdy print by ozfunghi
by Thingiverse
Last crawled date: 3 years, 1 month ago
If you like my work or intend to print it, please consider supporting us for free by streaming some of our indie music on your preferred streaming services: Spotify, Deezer, iTunes, Tidal, Amazon Music, Google Music etc. Check http://puncheur.org for links to each service. Thank you very much
IMPORTANT - PLEASE READ:
Newer designs will be uploaded. These will be labeled "V2" (... "V3"... etc) in the filenames. These should still be compatible with all the other (older) parts (except for the autolevel sensor mounts). Read the "updates" section for additional info on newer parts.
TOO CONFUSING, TOO MUCH TEXT!:
This is a fang mod upgrade, that is designed to be sturdy and easy to print. Meaning sturdier and/or easier than the other fang designs out there, at the time of creation. It is semi modular with different options, and easy to mod to your own liking, since you only need to mod and print the part you want to change, and not the entire assembly. If you decide to mod, please give credit and add it to the remix section for other people to find.
You need 4 parts for this fang model:
1/ carriage plate
2/ 40mm duct (stock or microswiss)
3/ carriage plate clip (recommended but not essential, it adds stability)
4/ the actual fang (stock 4010 fan (V1, V2, V3), 40mm fan (V2), 5015 fan (V2, V3), dual 5015 and dual 4010 fans)
If you have other than stock parts, like a 5015 fan instead of the stock fan, you can download the 5015 fang instead of the regular fang. If you own a MicroSwiss hotend, you must download the MicroSwiss 40mm duct instead of the regular one. If you own an optional bed leveling sensor, you can also download those, but they may not work with the newer fang versions (V3) currently. Also check out the remix section for extra options. Note that i have not been able to test these optional parts myself, since i don't own a 5015 fan, nor a MicroSwiss hotend, nor any of the sensors. Please follow the installation order. Trust me, it is the best way, i've tried an alternative order that others have followed, (hotend + 40mm duct before fang) and that is not the way to go, since you will get frustrated aligning the fang and screw holes, and you'll risk breaking the more delicate parts. For more info, see the "original info" section.
INSTALLATION ORDER (ignore at your own risk):
unmount the old fan box or fang design,
unmount the hotend from the carriage
install carriage plate + clip (+screws)
attach the fang to the carriage plate (+screws) (EDIT: make sure the holes are lined up properly and maybe it's best to squeeze the plastic parts together with your fingers while screwing so that the screw doesn't push them apart and snap the plastic parts)
slide the hotend + cables from the top, down between the carriage plate and fang.
slide the 40mm duct onto the hotend
mount the hotend + 40mm duct onto the carriage, from underneath the fang and tilt it in place (+screws)
screw the 40mm duct onto the fang
screw the 40mm fan onto the 40mm duct
screw the radial fan onto the fang (you can also do this before mounting the fang). Be carefull with the tiny screws. I suggest screwing them into the fang before mounting the fan, back and forth moving forward slowly, just to make sure not to force the screws in, so you don't break the plastic and widen the holes just enough. Once the screw has pierced through, unscrew it, mount the fan, and safely screw the screw in again.
All aditional screws used are 3m screws
UPDATES:
1/ added an optional EZABL sensor mount for those interested, feedback appreciated (i don't own one myself). I used roughly the same coordinates as thing:2446196, which needs offsets set to 48 and -11.
2/ the STL for the 40mm fan duct didn't slice properly in S3D, due to the nature of a number of remixes one over the other. Thanks to Daniel Liška for cleaning it up! (See files).
3/ If the plastic plate sticks out ever so slightly beyond the metal inserts for the hotend, it might be best to tighten the hotend screws again after a first print, when the plastic is still soft. To ensure the hotend touches the metal inserts and doesn't start to wobble ever so slightly when the plastic gets heated.
4/ Added a fang for a non-stock 5015 fan. Optional and experimental (i haven't tested this myself, feedback is welcome). I also gave this fang a little bit more (2mm) clearance at the bottom, without affecting the direction of flow. I also updated the EZABL mount to fit with both fangs (the 5015 is a tad wider, due to the wider fan mount).
5/ Apparently, the newer CR-10S has a set screw were the 40mm fan duct comes. Other users have bypassed this problem by taking the set screw out to mount the fan duct, and putting it back later, or by cutting a tiny notch out of the fan duct. I will try to update the 40mm fan duct to remedy this issue, even though it seems to be a minor grievance.
6/ Uploaded an optional BLtouch mount due to popular demand. Experimental, since i don't own a BLtouch myself. Feedback is welcome. I used the same placement as thing:2493610. Coordinates should be -40 & -10.
7/ Uploaded an optional 40mm fan mount for the MicroSwiss, which i remodeled from the ground up. Also experimental, since i do not own one myself. Again, feedback is greatly appreciated!
8/ Started uploading improved designs. As mentioned in the "please read" note above.
9/ added pictures of the V2 design (the orange parts are V2, the pink ones are V1). For those interested in my Ikea mirror brackets seen in the pictures, see https://www.thingiverse.com/thing:2783526
10/ all parts have been tested to be sliced with Cura. If you have issues with some files in S3D, people have had succes using https://service.netfabb.com/service.php to get it to work on S3D. Once everything is done, i'll probably make the updated Blender file available as well, and people can export it themselves if they want.
11/ I have not finished the 40mm Fang yet, but there are two users who each made a remix, so if you're in need, please check those out!
12/ I finally finished the 40mm Fang, it's uploaded but not tested. Feedback welcome. Do compare with the 40mm remixes made by other members. I tried to maximize the airflow from the fan into the fang. Supports should not be needed with this print.
13/ Users mmotley & maccesch have uploaded a repaired STL of the V2 fang for non-Cura users that are getting errors, as an attachment in the comment section.
14/ I have just placed an EXPERIMENTAL V3 (stock radial fan) in the COMMENTS SECTION! I'd like some feedback before putting it in the files section. Check out the comment with STL in attachment.
15/ I have been running the V3 fang for months and i believe it is an improvemend. It is NOT compatible with the V2 ABL mounts. I'll add it to the files so you don't have to search for it in the comments. https://www.youtube.com/watch?v=UhgXZdTQFiA
16/ I have also published a mounting plate specifically for the Tronxy X5S, so you can use all the assembly fangs of the CR10, on the Tronxy! https://www.thingiverse.com/thing:3349695
17/ Uploaded a dual 4010 fang design. For people that have a couple of these, but don't think the stock fan is sufficient and don't have a 5015 yet, or just want to put a spare 4010 to good use. Airflow is directed directly at the nozzle tip. See image. As noted in the comments of another thing, this model should be used with the standard hotend insulation, not with a silicone sock (which whill block the airflow).https://www.youtube.com/watch?v=34op_uKjJgI
18/ Uploaded a V3 5015 design.
19/ Uploaded a V3 version of the carriage plate, with 1 thick tab instead of 2 thin ones, which should make it easier to mount the fang.
20/ Uploaded a Dual 5015 fang. Only use this if you know what you are doing, since it is possible to have too much cooling with this. Also, unlike the Dual 4010 design, this one leaves enough room for a silicone sock, and i highly advise using one, Because just like the Dual 4010, this design has airflow aimed directly below the nozzle tip (extrusion point), but due to the shear force of two 5015 fans, there will be some "collateral" air bouncing against the bottom of the heaterblock. Airflow is going front to back, in order to circulate the hot air away. There should be a relatively wide spread to ensure longer exposure to the cooling, while moving around quickly. I have made this for use with a 0.8mm nozzle, it is very possible that this design is overkill with a regular 0.4mm nozzle. There are latches for rubber bands, to pull the fan tight to the mount.
ORIGINAL INFO:
This is a fang mod for the Creality CR-10(s) designed to be sturdier, and easier to print. It is also easier to mod without having to reprint the entire model. This is for a completely stock solution, with optional parts for a 5015 fan, a MicroSwiss hotend, an EZABL leveling sensor, and a BLtouch sensor.
The one i printed originally, had a flimsy connection between the hotend and the 40mm duct, where the entire model was being carried and held up. I printed that model in PLA, (which was supposed to be ok according to the instructions) but only a few minutes into a PLA print at 210°, the entire thing started to wobble as well as the hotend itself, since there was a printed part between the hotend and the screws that held the hotend in place, which also melted. Causing the hotend itself to come slightly loose.
I think that 40mm duct connection method was not a good choice for attaching the entire fang design, and wanted to improve.
The way i designed this mod, it not only makes it easier to print (more parts flat on the bed), but you can also decide which parts to print in ABS, PETG or PLA. Or which parts to print with a brim, or with a different infill or speed/heat settings, supports etc. You could still print the fang in PLA, and print the other parts in ABS or PETG. The risk of a failed print is also greatly reduced, since it is broken down into 4 seperate and easier pieces, as well as shorter prints.
Due to the nature of the design, it is also easier to fit the cables through. Since you have to assemble the design after it is printed. You can use screws, or you can glue it together. Do as you see fit.
The Fang airduct and stock Fang fanmount, were taken from the Blender file by Racush. The plate, clip, new/upgraded 40mm duct, 5015 mount, EZABLE mount, BLtouch mount, fins/wings design, the concept were all done by myself. Some measurements were based on different thingiverse files though.
The V1 blend file is included. It is based on the blend file by Racush. Once i have all V2 parts ready, i will also share that blend file.
https://youtu.be/yi9rvjzJ1fE
IMPORTANT - PLEASE READ:
Newer designs will be uploaded. These will be labeled "V2" (... "V3"... etc) in the filenames. These should still be compatible with all the other (older) parts (except for the autolevel sensor mounts). Read the "updates" section for additional info on newer parts.
TOO CONFUSING, TOO MUCH TEXT!:
This is a fang mod upgrade, that is designed to be sturdy and easy to print. Meaning sturdier and/or easier than the other fang designs out there, at the time of creation. It is semi modular with different options, and easy to mod to your own liking, since you only need to mod and print the part you want to change, and not the entire assembly. If you decide to mod, please give credit and add it to the remix section for other people to find.
You need 4 parts for this fang model:
1/ carriage plate
2/ 40mm duct (stock or microswiss)
3/ carriage plate clip (recommended but not essential, it adds stability)
4/ the actual fang (stock 4010 fan (V1, V2, V3), 40mm fan (V2), 5015 fan (V2, V3), dual 5015 and dual 4010 fans)
If you have other than stock parts, like a 5015 fan instead of the stock fan, you can download the 5015 fang instead of the regular fang. If you own a MicroSwiss hotend, you must download the MicroSwiss 40mm duct instead of the regular one. If you own an optional bed leveling sensor, you can also download those, but they may not work with the newer fang versions (V3) currently. Also check out the remix section for extra options. Note that i have not been able to test these optional parts myself, since i don't own a 5015 fan, nor a MicroSwiss hotend, nor any of the sensors. Please follow the installation order. Trust me, it is the best way, i've tried an alternative order that others have followed, (hotend + 40mm duct before fang) and that is not the way to go, since you will get frustrated aligning the fang and screw holes, and you'll risk breaking the more delicate parts. For more info, see the "original info" section.
INSTALLATION ORDER (ignore at your own risk):
unmount the old fan box or fang design,
unmount the hotend from the carriage
install carriage plate + clip (+screws)
attach the fang to the carriage plate (+screws) (EDIT: make sure the holes are lined up properly and maybe it's best to squeeze the plastic parts together with your fingers while screwing so that the screw doesn't push them apart and snap the plastic parts)
slide the hotend + cables from the top, down between the carriage plate and fang.
slide the 40mm duct onto the hotend
mount the hotend + 40mm duct onto the carriage, from underneath the fang and tilt it in place (+screws)
screw the 40mm duct onto the fang
screw the 40mm fan onto the 40mm duct
screw the radial fan onto the fang (you can also do this before mounting the fang). Be carefull with the tiny screws. I suggest screwing them into the fang before mounting the fan, back and forth moving forward slowly, just to make sure not to force the screws in, so you don't break the plastic and widen the holes just enough. Once the screw has pierced through, unscrew it, mount the fan, and safely screw the screw in again.
All aditional screws used are 3m screws
UPDATES:
1/ added an optional EZABL sensor mount for those interested, feedback appreciated (i don't own one myself). I used roughly the same coordinates as thing:2446196, which needs offsets set to 48 and -11.
2/ the STL for the 40mm fan duct didn't slice properly in S3D, due to the nature of a number of remixes one over the other. Thanks to Daniel Liška for cleaning it up! (See files).
3/ If the plastic plate sticks out ever so slightly beyond the metal inserts for the hotend, it might be best to tighten the hotend screws again after a first print, when the plastic is still soft. To ensure the hotend touches the metal inserts and doesn't start to wobble ever so slightly when the plastic gets heated.
4/ Added a fang for a non-stock 5015 fan. Optional and experimental (i haven't tested this myself, feedback is welcome). I also gave this fang a little bit more (2mm) clearance at the bottom, without affecting the direction of flow. I also updated the EZABL mount to fit with both fangs (the 5015 is a tad wider, due to the wider fan mount).
5/ Apparently, the newer CR-10S has a set screw were the 40mm fan duct comes. Other users have bypassed this problem by taking the set screw out to mount the fan duct, and putting it back later, or by cutting a tiny notch out of the fan duct. I will try to update the 40mm fan duct to remedy this issue, even though it seems to be a minor grievance.
6/ Uploaded an optional BLtouch mount due to popular demand. Experimental, since i don't own a BLtouch myself. Feedback is welcome. I used the same placement as thing:2493610. Coordinates should be -40 & -10.
7/ Uploaded an optional 40mm fan mount for the MicroSwiss, which i remodeled from the ground up. Also experimental, since i do not own one myself. Again, feedback is greatly appreciated!
8/ Started uploading improved designs. As mentioned in the "please read" note above.
9/ added pictures of the V2 design (the orange parts are V2, the pink ones are V1). For those interested in my Ikea mirror brackets seen in the pictures, see https://www.thingiverse.com/thing:2783526
10/ all parts have been tested to be sliced with Cura. If you have issues with some files in S3D, people have had succes using https://service.netfabb.com/service.php to get it to work on S3D. Once everything is done, i'll probably make the updated Blender file available as well, and people can export it themselves if they want.
11/ I have not finished the 40mm Fang yet, but there are two users who each made a remix, so if you're in need, please check those out!
12/ I finally finished the 40mm Fang, it's uploaded but not tested. Feedback welcome. Do compare with the 40mm remixes made by other members. I tried to maximize the airflow from the fan into the fang. Supports should not be needed with this print.
13/ Users mmotley & maccesch have uploaded a repaired STL of the V2 fang for non-Cura users that are getting errors, as an attachment in the comment section.
14/ I have just placed an EXPERIMENTAL V3 (stock radial fan) in the COMMENTS SECTION! I'd like some feedback before putting it in the files section. Check out the comment with STL in attachment.
15/ I have been running the V3 fang for months and i believe it is an improvemend. It is NOT compatible with the V2 ABL mounts. I'll add it to the files so you don't have to search for it in the comments. https://www.youtube.com/watch?v=UhgXZdTQFiA
16/ I have also published a mounting plate specifically for the Tronxy X5S, so you can use all the assembly fangs of the CR10, on the Tronxy! https://www.thingiverse.com/thing:3349695
17/ Uploaded a dual 4010 fang design. For people that have a couple of these, but don't think the stock fan is sufficient and don't have a 5015 yet, or just want to put a spare 4010 to good use. Airflow is directed directly at the nozzle tip. See image. As noted in the comments of another thing, this model should be used with the standard hotend insulation, not with a silicone sock (which whill block the airflow).https://www.youtube.com/watch?v=34op_uKjJgI
18/ Uploaded a V3 5015 design.
19/ Uploaded a V3 version of the carriage plate, with 1 thick tab instead of 2 thin ones, which should make it easier to mount the fang.
20/ Uploaded a Dual 5015 fang. Only use this if you know what you are doing, since it is possible to have too much cooling with this. Also, unlike the Dual 4010 design, this one leaves enough room for a silicone sock, and i highly advise using one, Because just like the Dual 4010, this design has airflow aimed directly below the nozzle tip (extrusion point), but due to the shear force of two 5015 fans, there will be some "collateral" air bouncing against the bottom of the heaterblock. Airflow is going front to back, in order to circulate the hot air away. There should be a relatively wide spread to ensure longer exposure to the cooling, while moving around quickly. I have made this for use with a 0.8mm nozzle, it is very possible that this design is overkill with a regular 0.4mm nozzle. There are latches for rubber bands, to pull the fan tight to the mount.
ORIGINAL INFO:
This is a fang mod for the Creality CR-10(s) designed to be sturdier, and easier to print. It is also easier to mod without having to reprint the entire model. This is for a completely stock solution, with optional parts for a 5015 fan, a MicroSwiss hotend, an EZABL leveling sensor, and a BLtouch sensor.
The one i printed originally, had a flimsy connection between the hotend and the 40mm duct, where the entire model was being carried and held up. I printed that model in PLA, (which was supposed to be ok according to the instructions) but only a few minutes into a PLA print at 210°, the entire thing started to wobble as well as the hotend itself, since there was a printed part between the hotend and the screws that held the hotend in place, which also melted. Causing the hotend itself to come slightly loose.
I think that 40mm duct connection method was not a good choice for attaching the entire fang design, and wanted to improve.
The way i designed this mod, it not only makes it easier to print (more parts flat on the bed), but you can also decide which parts to print in ABS, PETG or PLA. Or which parts to print with a brim, or with a different infill or speed/heat settings, supports etc. You could still print the fang in PLA, and print the other parts in ABS or PETG. The risk of a failed print is also greatly reduced, since it is broken down into 4 seperate and easier pieces, as well as shorter prints.
Due to the nature of the design, it is also easier to fit the cables through. Since you have to assemble the design after it is printed. You can use screws, or you can glue it together. Do as you see fit.
The Fang airduct and stock Fang fanmount, were taken from the Blender file by Racush. The plate, clip, new/upgraded 40mm duct, 5015 mount, EZABLE mount, BLtouch mount, fins/wings design, the concept were all done by myself. Some measurements were based on different thingiverse files though.
The V1 blend file is included. It is based on the blend file by Racush. Once i have all V2 parts ready, i will also share that blend file.
https://youtu.be/yi9rvjzJ1fE
Similar models
thingiverse
free
Sapphire Plus MicroSwiss Hotend Mount 4010 + 5015 Fans by Keemo2020
...nsioner nuts may have to be scaled in x and y to 104% depending on accuracy of your printer, nuts for the back scaled in z to 50%
thingiverse
free
CR-10 FANG OEM Fang Reversed 5015 Mount by Supremicus
... less overhang.
you'll need 3 parts for this fang remix from the original thing:
carriage plate
carriage plate clip
40mm duct
thingiverse
free
Ender 3 direct drive adaptor for FANG OEM duct assembly by peetman
...ing settings:
retraction distance: 6 mm
retraction speed: 45 mm/s
coasting enabled: yes
z hop enabled: yes
z hop distance: 0.2 mm
thingiverse
free
Removeable X Carriage System for the FLSUN I3 Original by JamesK1
... it easier to push out the supports in the nut slot.
20170926 - added v2 of the fang with airflow angled more toward the nozzle.
thingiverse
free
CR-10 50 x 15 Double Blower Fan Fang Mount remix with BLTouch by ratherbe_flyin
...r changed let me know and i can either do it or post a step file
i print all parts that go on my x carriage with 3dxtech cf nylon
thingiverse
free
Sovol Sv01 5015 radial part cooling duct by trohn_javolta
...sure the airflow isn't that great but i just printed a bridging test and it turned out quite good.... if that says anything..
thingiverse
free
MicroSwiss DirectDrive AllMetalHotend CR10s Pro Fan Duct for 4010 fans (Alpha version for testing) by Print2Win
...d 2 m3 grub screws.
this version is still in alpha!!
as testing is still in progress please report any issues you're having!!
thingiverse
free
CR10 v3 (and v2) for v6 and volcano hotend mount by goegen5
...o remix this to improve the parts fan mount or make another one, feel free to do it. it was kind of a pain to get printing right.
thingiverse
free
"The Mustache" Sidewinder X1 Mosquito + BMG 5015 fan duct by Montrealer
...much more efficient and quieter than the stock setup.
looks like a mustache, so this is very manly fan duct, weaklings beware : )
thingiverse
free
Fang (fan) Duct for Tevo Tarantula Dual Extruder Stock by Bryceletarmo
...age (acrylic part) and the bottom of the fang duct is 53mm. full stl of the assembly is attached.
it works good for me ^^
enjoy !
Ozfunghi
thingiverse
free
Carriage plate for fang (ozfunghi) by Ludomante
.... for all directions and mounting recommendations i refer you to the link of ozfunghi:
https://www.thingiverse.com/thing:2763931
thingiverse
free
Oval wardrobe rod plug by ozfunghi
...d from sliding off the holder in case your rod is a smidge too short. if you print two, you can keep the rod centered and steady.
thingiverse
free
Laser engraver mount for the CR-10 FANG OEM fan duct assembly by ozfunghi by bwolf80
...nd version of the holder should reduce the weight on the cart and be as inconspicuous as possible when the laser is not attached.
thingiverse
free
Bowden guide Tronxy X5S by ozfunghi
...ter, wider guide, should only be printed if you have moved the extruder to the front. which is recommend over the stock position.
thingiverse
free
push-open spring mount for wardrobe by ozfunghi
...t our shelves weren't thick enough, so i needed a mount for the mechanism.
you should be able to print this without supports.
thingiverse
free
Dial Gauge Holder for ozfunghi's CR-10 FANG OEM fan duct assembly by GlowingEmbers
...emix it in fusion and press-pull some sides to make it fit.
i have included a small clip that you can use to test fit, or remix.
thingiverse
free
Pawn for portable miniature chess with magnet by ozfunghi
...cheap tronxy xy2 and they came out nice. just make sure you print them very slow (5mm/s), i used layer height of 0.12mm with pla.
thingiverse
free
V3 Fang 40mmx40mm Duct by sbilkey
...for the other pieces to this thing visit https://www.thingiverse.com/thing:2763931/. ozfunghi has made a sturdy cr-10 fang assembly which fits...
thingiverse
free
Bender head by ozfunghi
...'t need supports, even goggle edge thickness
v3 = same improvements as v2 but with a new goggle design, more like the cartoon
thingiverse
free
Mosfet & mainboard support frame for Anet A8 by ozfunghi
...d use sjouke's file for measurements.
how to connect the mosfet board: https://3dprint.wiki/reprap/electronics/heatbed_mosfet
Fang
turbosquid
$4
fang knife
...bosquid
royalty free 3d model fang knife for download as fbx on turbosquid: 3d models for games, architecture, videos. (1331310)
turbosquid
$15
Fanged sword
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
Sun Fang
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$2
Dodge Viper Fangs Logo
...s) .images previews were rendered with blender internal render(cycles). format:(.3ds)/(.obj)/(.blend) .blender:face(12488)/ver...
3d_export
$10
wild boar with big fangs
...wild boar with big fangs
3dexport
wild boar made in zbrush
3d_export
$9
Dodge viper fangs 2003 logo 3D Model
...am vehicle part of auto transport 3d model logo emblem detailed high
dodge viper fangs 2003 logo 3d model rmodeler 59624 3dexport
3d_ocean
$12
Chair "The Skull with Fangs" (hi-poly model)
...was made as a max 2009 file with vray version 1.5, also included are max, .obj and .fbx exports with vray materials included. ...
3ddd
$1
Giorgetti
...giorgetti 3ddd giorgetti , fang стол для...
3d_export
$5
Brown Spider 3D Model
...brown spider 3d model 3dexport spider brown mustache fang glasses brown spider 3d model mus1232 87864...
3d_export
$30
Vampire Bust 3D Model
...vampire bust 3d model 3dexport vampire bust cape fang monster undead vampire bust 3d model twistedsyndrome 37923...
Oem
3d_export
$20
OEM rims 3D Model
...oem rims 3d model
3dexport
nissan maxima 2013 new rims wheels tire vehicle part oem
oem rims 3d model artur92_art 84358 3dexport
turbosquid
$39
OEM Figure Toy
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$39
Mercedes Benz OEM wheel
...mercedes benz oem wheel
3dexport
3d_export
$5
VW Lupo 3D Model
...3dexport vw volkswagen lupo 3d hatchback game compact stock oem vw lupo 3d model ramonvicious 55589...
3d_export
$20
Nissan Sentra 2013 rims 3D Model
...nissan maxima 2013 new rims wheels tire vehicle part oem sentra nissan sentra 2013 rims 3d model artur92_art 84359...
3d_export
$20
Nissan Navara 2013 rims 3D Model
...nissan maxima 2013 new rims wheels tire vehicle part oem sentra navara nissan navara 2013 rims 3d model artur92_art...
3d_export
$20
Nissan Murrano 2013 rims 3D Model
...nissan maxima 2013 new rims wheels tire vehicle part oem sentra navara murrano nissan murrano 2013 rims 3d model...
3d_export
$5
ram 2500 center dash control panel aftermarket
...curved to match the shape and curve of the oem dash face. for those looking to replace the oem...
3d_export
$12
toyota aristo factory aero
...toyota aristo factory aero 3dexport oem factory aero front and rear lips for a toyota...
3dfindit
free
YRB-OEM
...yrb-oem
3dfind.it
catalog: ysc
Sturdy
turbosquid
$19
Martha sturdy - Jackson wire lamp
...dy - jackson wire lamp for download as 3ds, max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1147669)
3d_export
$6
lomos sturdy collapsible shopping trolley with stair-climbing function in grey
...g tools. it can also be used to carry or store office files, bottles of water, sports equipment, beach gear and kitchen supplies.
3d_export
$5
kindle stand
...things. i printed it at 70% fill for a sturdy ...
3d_export
$25
Bianca Chair
...and white pattern fabric, fine solid wood framing and sturdy legs. available in these formats. maya max cinema4d...
3ddd
$1
CH_415
..., журнальный , круглый an elegant and lightweight yet sturdy coffee table. ch415 is part of the kastrup series...
3ddd
$1
Vintage Boxcar
...the console’s edges are crafted with robust moulding while sturdy iron rivets keep it all together. the solid reclaimed...
3ddd
free
Pottery Barn Tava Bath Accessories
...accessories pln 53.32 – pln 224.71 hand woven of sturdy rattan, these pieces add rich texture to the bath....
3d_ocean
$15
New Shoe
...is stronger and more lasting shoe is comfortable and sturdy and the color and design is...
3ddd
$1
Miniforms Acco Table
...slight twist that makes the base surprisingly strong and sturdy ...
3ddd
$1
Figo Futon Chaise Lounge
...in comfort at multiple angles with a headrest and sturdy nordic pine frame. available in various frames and multiple...
Cr
turbosquid
$15
Creazioni CR-673 CR-4461
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Ravak CR 055.00
...ravak cr 055.00
3ddd
ravak , смеситель
ravak cr 055.00
turbosquid
$100
CR-002
...
turbosquid
royalty free 3d model cr-002 for download as stl on turbosquid: 3d models for games, architecture, videos. (1686037)
3ddd
$1
Ravak CR 012.00
...ravak cr 012.00
3ddd
ravak , смеситель
смеситель ravak cr 012.00
3ddd
free
Консоль CR Currin
...ь , cr currin
консоль cr currin
ширина - 1675 мм
глубина - 510 мм
общая высота - 810 мм
3ddd
$1
CR 39444
...0
диаметр: 100
тип патрона: gu5,3 gu10
количество ламп: 1
мощность: 35w
цвет: золото хрусталь
материал: металл хрусталь exclusive
3d_ocean
$89
Honda CR-Z
...www.youtube.com/watch?v=rrbb4d4lypk ` he honda cr-z‘s exterior styling is formed around a “one-motion wedge” concept with a lo...
3ddd
$1
Creazoni / STEFY CR-8901
...creazoni / stefy cr-8901
3ddd
creazoni
creazioni stefy cr-8901
turbosquid
$60
Chain-CR-001
...squid
royalty free 3d model chain-cr-001 for download as stl on turbosquid: 3d models for games, architecture, videos. (1680536)
turbosquid
$99
Honda CR-Z
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Duct
turbosquid
$19
Duct Set
...d
royalty free 3d model duct set for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1145038)
turbosquid
$10
Duct Tape
...id
royalty free 3d model duct tape for download as ma and ma on turbosquid: 3d models for games, architecture, videos. (1580351)
turbosquid
free
Duct Tape
...
free 3d model duct tape for download as obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1486518)
3d_ocean
$7
Air-duct
... ventilation
high quality industrial air duct ventilation model. created in cinema 4d but comes in various other formats as well.
turbosquid
$20
Air ducts
...lty free 3d model air ducts for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1262476)
3d_export
$10
Supply air duct
...supply air duct
3dexport
supply air duct with two axial fans and hangers
turbosquid
$2
Duct Tape
...e 3d model duct tape for download as obj, fbx, blend, and dae on turbosquid: 3d models for games, architecture, videos. (1473972)
turbosquid
free
Duct Tape
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$3
Duct tape
...polys. includes: cinema 4d project. model in 3 formats (obj, fbx, 3ds). 6 .tga texture maps (albedo, ambient occlusion, diffus...
turbosquid
$40
Ventilation Duct PACK
...tion duct pack for download as ma, obj, fbx, and unitypackage on turbosquid: 3d models for games, architecture, videos. (1287068)
Fan
3d_export
$5
fan
...fan
3dexport
fan 3d model, table fan, fan, electric fan, ventilator
archibase_planet
free
Fan
...fan
archibase planet
fan large fan
fan out n260707 - 3d model for interior 3d visualization.
archibase_planet
free
Fan
...fan
archibase planet
fan ceiling fan ventilator
fan stealth n300615 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$15
fan
...fan
3dexport
is an ancient fan
3ddd
$1
Fan-C-Fan by marco gallegos
...n-c-fan by marco gallegos
3ddd
вентилятор , marco gallegos
fan-c-fan by marco gallegos
3d_export
$10
fan
...fan
3dexport
a detailed fan designed for home or space blowing is now available for only 19.99!
turbosquid
$1
Fan
...fan
turbosquid
free 3d model fan for download as on turbosquid: 3d models for games, architecture, videos. (1427865)
turbosquid
$14
Fan
...fan
turbosquid
royalty free 3d model fan for download as on turbosquid: 3d models for games, architecture, videos. (1415642)
3ddd
$1
Светильник Fan
...светильник fan
3ddd
fan , italamp
светильник fan, производитель italamp
turbosquid
$25
Fan
...fan
turbosquid
royalty free 3d model fan for download as c4d on turbosquid: 3d models for games, architecture, videos. (1483246)
Assembly
3d_export
$7
Electronic product assembly machine assembly machine
...electronic product assembly machine assembly machine
3dexport
electronic product assembly machine assembly machine
3d_export
$15
generator assembly line
...ced and assembled in the form of module block. it is a demonstration project of generator assembly. welcome to download and learn
3d_export
$10
elevator traction machine assembly line motor assembly process
... traction machine assembly line motor assembly process
3dexport
elevator traction machine assembly line (motor assembly process)
3d_export
$16
pin assembly machine
...pin assembly machine
3dexport
pin assembly machine
3d_export
$7
tower-crane-assembly
...tower-crane-assembly
3dexport
tower-crane-assembly
turbosquid
$100
Engine Assembly
...id
royalty free 3d model engine assembly for download as stl on turbosquid: 3d models for games, architecture, videos. (1658296)
turbosquid
$100
Engine Assembly
...id
royalty free 3d model engine assembly for download as stl on turbosquid: 3d models for games, architecture, videos. (1658293)
turbosquid
$100
Engine Assembly
...id
royalty free 3d model engine assembly for download as stl on turbosquid: 3d models for games, architecture, videos. (1658291)
turbosquid
$75
Platform Assembly
...royalty free 3d model platform assembly for download as blend on turbosquid: 3d models for games, architecture, videos. (1472939)
turbosquid
$15
generator assembly
...y free 3d model generator assembly for download as and sldas on turbosquid: 3d models for games, architecture, videos. (1469469)
Easy
design_connected
$16
Easy
...easy
designconnected
sollos easy computer generated 3d model. designed by almeida, jader.
design_connected
$20
Easy
...easy
designconnected
established & sons easy armchairs computer generated 3d model. designed by ed carpenter.
3d_ocean
$1
Easy Button
... it is accurate in close-ups. you can drop this model right into any setting. the textures are included as well as links to do...
design_connected
$16
Easy Armchair
...easy armchair
designconnected
easy armchair computer generated 3d model. designed by jeanneret, pierre.
3ddd
$1
Pouf EASY
... easy
3ds max 2010.v-ray 2.40.03.file formats fbx,obj. pouf desiree 2014 easy. dimensions 100x100x45 cm.
design_connected
$18
Easy Armchair
...easy armchair
designconnected
fsm easy armchair computer generated 3d model. designed by hartmann, markus.
design_connected
$16
Easy Chair
...easy chair
designconnected
magis easy chair computer generated 3d model. designed by seymour, jerszy.
design_connected
$16
Easy Rider
...easy rider
designconnected
bulo easy rider computer generated 3d model. designed by venlet, danny.
design_connected
$11
Easy Footstool
...easy footstool
designconnected
fsm easy footstool computer generated 3d model. designed by hartmann, markus.
design_connected
$18
Doda - Easy
...doda - easy
designconnected
molteni & c doda - easy computer generated 3d model. designed by laviani, ferruccio.
10
turbosquid
$25
10
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
a-10
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
EX 10
...ex 10
3ddd
samsung , фотоаппарат
ex 10
3ddd
$1
Bed 10
...bed 10
3ddd
постельное белье
bed 10
evermotion
$25
Scene 10 Archinteriors vol. 10
...dering design interior
take a look at textured and shadered visualization scene ready to be rendered.. evermotion 3d models shop.
3ddd
$1
Curtains 10
...curtains 10
3ddd
curtains 10
3ds max 2011,fbx + textures
polys: 100355
3ddd
free
PLANTS 10
...plants 10
3ddd
цветок , горшок
plants 10,, with 3 different color planter boxes
turbosquid
$24
Chandelier MD 89310-10+10 Osgona
... chandelier md 89310-10+10 osgona for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1218762)
design_connected
$29
Nuvola 10
...nuvola 10
designconnected
gervasoni nuvola 10 computer generated 3d model. designed by navone, paola.
design_connected
$22
Kilt 10
...kilt 10
designconnected
zanotta kilt 10 computer generated 3d model. designed by progetti, emaf.
design_connected
$27
...print
designconnected
moroso print computer generated 3d model. designed by wanders, marcel.
3ddd
free
Eichholtz Prints
...- eichholtz print central station i
13 - eichholtz print central station ii
14 - eichholtz print marisa
15 - eichholtz print tish
3ddd
$1
Eichholtz Prints
...print abstract - set of 2
10 - eichholtz print orange abstract
11 - eichholtz print buddha right
12 - eichholtz print buddha left
turbosquid
$1
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
free
Eichholtz Prints
...of 4
2 - print dunbar 2 set of 4
3 - print guadeloupe 1 set of 4
4 - print guadeloupe 2 set of 4
5 - print giles
6 - print trett
3ddd
$1
Eichholtz Prints
...nt tutti frutti
3 - eichholtz prints watson - set of 2
4 - eichholtz prints antique nautilus - set of 2
5 - eichholtz print tiara
3d_export
$5
Monster for printing
...monster for printing
3dexport
monster 3d model printing
3ddd
free
printed rug
...printed rug
3ddd
ковер
very creative printed rug
3ddd
free
Eichholtz Prints
...иал: бумага
габариты (вхш): 72 x 62 см
описание: print sweetmeat - постер в деревянной раме.
3 - prints varsity set of 2
арти
3ddd
free
Art Print Posters
...art print posters
3ddd
прованс
art print posters by patrician prints