Covid pivotable face protective mask (fast and cheap) by panchazo

Last crawled date: 4 years, 1 month ago

Designed this face protective mask due to the COVID and the lack of protective equipement available at scale. This is mask uses less than 10g of plastic, prints in less than 25min and is functional.
Attach an elastic band to the back so you can adjust to your head.
It can pivot up and down. It can be flexed and wont break.
It includes several parts so it can also be printed on a plate smaller than 20cm by 20cm.
Use at your own risk.
Forehead band
10min 4grams
Print the forehead band with the following settings:
no supports,
no plate adhesion stuff,
no infill,
1 or 2 walls,
2 bottom layers,
3 top layers
layer height of 0.3mm
Then print the other items:
2 clips,
1 left and 1 right supports
optionaly the ref holes for drilling the holes to the protective transparent plastic
Other parts settings (can be printed simultaneously)
13min 4grams
no supports,
no plate adhesion stuff,
20% infill,
5 walls,
2 bottom layers,
3 top layers
layer height of 0.3mm