Cults
Countersink Handle
by Cults
Last crawled date: 6 years, 1 month ago
This is my Handel design for Countersinks it is easy to use and has a good strength holding everything with a 10mm shaft (added 1/4" shaft).
I printed the Mainbody and Tightener-screw with 90% and the shell with 100% infill.
All parts are printed with a layer height of 0,15.
Maybe you will need a brim for the Mainbody.
I chose PET-G Filament becouse of the good layer adhesion.
I printed the Mainbody and Tightener-screw with 90% and the shell with 100% infill.
All parts are printed with a layer height of 0,15.
Maybe you will need a brim for the Mainbody.
I chose PET-G Filament becouse of the good layer adhesion.
Similar models
cults
free
Drillpro center drill countersink set compartment
... me doing more things. thanks!
banggood: https://goo.gl/zxgx3a
gearbest: https://goo.gl/ffe59f
aliexpress: https://goo.gl/bqli15
cults
free
Z-11
...ible, because the canard is very thin, so if the layer height is thick like 0.2 mm. the canard will be weak and easy to snap off.
cults
free
18mm diameter impeller for 3mm shaft
...t a slow speed and use cooling for best quality.
also useful as a small benchmark print to test for fine details and overhangs.
cults
free
Voronoi Owl
...t too small!
i printed at ~ 4x3x8cm and up with 0.1mm layers
(i dropped a mouse inside- while printing so it wont feel hungry :-)
cults
free
Butterfly Necklace
...fly.stl file.
first layer of color starts at 0.0 and ends on 0.4mm,
second starts at 0.6 and ends on 1 mm
third layer 1.2 to 1.4
cults
free
Love chemistry brooch/pin vol2
...her file i provided, to print three seperate layers:
first layer is 1mm height
second layer is 0.6mm height
third layer is 0.2mm.
cults
free
Love chemistry brooch/pin
...her file i provided, to print three seperate layers:
first layer is 1mm height
second layer is 0.6mm height
third layer is 0.2mm.
cults
free
Fashion Traffic Cones Collection
...for small prints, layer height should be lower enough to keep the detail of the shapes. 0.2mm does a good work with current size.
cults
free
robotic arm (arduino)
... must print all the pieces,
it works good and is a good project for school.
print it with a density of 30 % in order to be light.
cults
free
Dumbbell holder for Exercise Bikes
...dumbbell holder for exercise bikes
cults
i printed using pla 50% fill 0.3mm layer.
attached using zip-ties.
Countersink
cults
free
Drillpro center drill countersink set compartment
... me doing more things. thanks!
banggood: https://goo.gl/zxgx3a
gearbest: https://goo.gl/ffe59f
aliexpress: https://goo.gl/bqli15
cults
free
Bearingless Fidget Spinner
...concept is really simple. it is like a double-sided countersink hole with a clearance of 0.6mm from the middle...
cults
free
spin the shot
...3 different parts with a bolt m3 with a countersink head and an m3 nut that you can find...
cults
free
1405 Simple X Ends - Max Stock Bed Size
...screws (to further maximize your bed area you should countersink the screw...
cults
free
Bit holder (pegboard or wall mounted)
...rear row is designed for larger bits such as countersink chamfer, deburring and drill bits. the smaller front row...
Handle
cults
free
Handle - Handle
...handle - handle
cults
handle handgrip
handle with 179mm between holes.
ø8.5mm holes.
cults
$1
Handle
...handle
cults
handle cabinet house
handle that you can use to replace a defective one.
i can resize it if necessary.
cults
free
handle
...handle
cults
home gadget
kitchen furniture handle, a simple idea to share
cults
free
Replacement Handle
...replacement handle
cults
replacement handle
replacement handle
cults
free
Foosball handle
...foosball handle
cults
fooball handle
foosball handle
for 16mm rods
cults
free
Solid handle
...solid handle
cults
handle solid 3d house
pretty sturdy handle
cults
free
Fridge handle
...fridge handle
cults
handle fridge
3d file to replace a broken fridge handle.
cults
free
Ruler Handle
...ruler handle
cults
handle ruler
basic handle for a 200 x 30 mm ruler.
cults
$1
Caravan handle
...caravan handle
cults
caravan
caravan replacement handle
cults
$2
Door handle
... as a plate.
good grip. several holes allow a perfect adjustment of the square.
objects drawn with autodesk 123d design