Costa Mejostilla by commons_factory

Last crawled date: 3 years ago

[Entry under construction]
This is a piece of urban furniture, developed through a process of collaborative design using digital design and digital fabrication tools. The piece works as an urban bench. It can be used as well as a small stage. It is built in 12 mm plywood, using a simple contour/section technique.
Dimensions: 2418 mm x 3180 mm x 642 mm
It is in the way of being parametrized [with Grasshopper] so that it can be adapted to different situations and sites. The design was developed within the Fabbing CC project, that took place in Caceres [Spain].
As it is one of our first tries with these object size the piece has to be considered a beta version. Improvements to be made include [1] the redesign of joints to make the press fit process smoother and more comfortable and [2] to include some kind of pieces in the joints that keep the sections in their position once they are there, and [3] a better design of the contact between the piece and the ground, that allows [a] for an easier assemblage process, [b] for easy adjustment to uneven ground, and [c] for protection from ground humidity affecting the plywood; [4] general dimensions can be improved too in order to have a more efficient use of the size of plywood sheets [especially concerning horizontal pieces. These piece was designed for a specific site and position that conditioned our dimensions, which were not very efficient.
Design, fabrication and assemblage team: The Sevilla Fablab team 2011, Jose Buzon, Carla Boserman, Adolfo Chautón, Jaime Diez, Manuel Gutierrez de Rueda, Juanjo Olmo, Jose Perez de Lama, Juan Carlos Pérez Juidias, Juanjo Pulido, Jose M. Sanchez Laulhe, Juan Carlos Venegas, Sabah Walid.
More info about the collaborative design process and other pieces designed: http://htca.us.es/blogs/fabbingcc [Spanish]