Control Panel Mount Bracket by TheDreamMaster

Last crawled date: 3 years, 1 month ago

Simple bracket for mounting panels to boxes or cases
(Pelican case pictured)
Insert an M3 nut into the bracket,
Then use a self tapping screw to secure the bracket against the case wall.
Place the panel on top and affix with an M3 screw. (M2 might work as well).
More details:
The inner diameter of the self-tapping screw hole is 3mm, so an 1/8" screw or smaller will work. As for the length, it is 13.3mm from the base of the conical tap to the edge of the outer wall. So a length of 11-12mm should be safe, perhaps 3/8"to 7/16".
The screws I used are 2.9mm in diameter and 11.5mm in length.