Connectors for 20mm MakerBeam by siderits

Last crawled date: 2 years, 11 months ago

You can prototype almost any kind of robotic platform or experimental laboratory equipment with these connectors.
Update 9/15
Plexiglas holder inline, 3 variations, 2.5 mm thickness, used for walls and floors or splash screen in prototype platforms.
Update 6/23/14
Standard servo holders. Mount in-line, single side, dual side, 90 degree. Ideal if you want to use the maker beam as a skeleton. Indents show where to drill holes.
Update: 2/23/2014
Vertical and horizontal limit switch holders for momentary button type normal open type switches.
Update 9/22/13
28ByJ-48 Small 5V stepper motor mount both front and side
Files named "Small Mount Front,Side,Top,Bottom respectively.
Update 7/14/13
Vertical stepper mounting plate
Example gallery images of axis motion.
Kit Tamiya Ladder, Chain and Sprocket set Item #70142
13 tooth gear drive sprocket and idler for Tamiya kit (see above)
UPDATE 6/30/13 Thumbwheel parts
Thumb frame
Thumb Pinion gear
Thumb Hold down
Thumb Axle
UPDATE 4/13: M6 pan head nut and bolt, stand off.
UPDATE 3/13:
Rack for 13 tooth 12 mm pinion gear on a 3.1 Volt Allelectronics Stepper motor.
Added ZIP file of "Final parts.zip"
UPDATE 2/13:
Added Plexiglass holder
Inspired by leitenmu at http://www.thingiverse.com/thing:47087
Added new contours and other parts to the set.
These connectors will allow the fabrication of almost any shape or enclosure, using the 20x20 mm MakerBean type model from dbozec ( http://www.thingiverse.com/thing:27825 ). Especially desinged to facilitate the construction of experimental laboratory equipment and platforms. The connectors are meant to be glue-"welded" to each other with ABS acetone slurry or cyanomethacrylate (crazy glue).
With these connectors you can do end-end, corner, rail, groove, flat top or plate, sliding surface, T-pieces end to side and side to side connections, wire guides and mounting or fixation parts. You name it...