CONCEPT OF A MULTIPLE SYSTEM PRODUCTION ELECTRIC POWER, WIND AND SEA WAVES IN A DECK MARINE by Isarts3d

Last crawled date: 2 years, 12 months ago

This project is based on the first one I did , which is a maritime platform with a floating base that aims to produce electricity from the movement of waves.
This platform with this system to take the waves to move a large and long helix, linked in a generator , I added two more gear systems that aim to make the most of the platform for the production of electricity .
The second ratchet system is composed of a combination with the first system. While the first system takes advantage of the motion of the sea waves to produce energy in the horizontal direction , the second advantage of the movement of the floating platform , the first system , up and down in the vertical direction according to the intensity of the waves .
The third system is independent of the previous two , because it harnesses the wind to produce electricity . Do you find yourself on the top deck , whose pillars were raised to enable the installation of large wind propellers .
Description of the three production systems deenergia electric :
First system - Aproveitaento wave motion of the maritima :
A mobile platform that slides between the four pillars of the main fixed platform , think up conjuto installed all this first system .
This system has the main piece to large and long propeller that goes from one end to another mobile platform , between the two ends together co generators .
This large propeller is enclosed by a cover designed to collect water from the ocean waves. At both ends of this cover there is a large nozzle angled at 45 degrees which is intended to collect larger amount of water that tapers to a channel until the propeller , which is located in the center thereof.
This narrowing of the canal that compresses the water reaches the propeller , which theoretically give a certain pressure , soamda the force of waves, driving the propeller and be moved by both the water of waves arriving from the front, as the refuxo tide .
The fact that this cover having nozzles angled at both ends , increase the ability of water to enter , resulting in a certain compression which helps to move the propeller in the center thereof, but also by the flow of the tide .
The entire assembly comprises a main cover , a capsule , which involves the entire system. This has both ends in the entrance mouth of the inner cover of the propeller, a grid which prevents fish dimensional objects or that can compromise the movement of the blades . It also has an entrance door and two windows in the ceiling for indoor lighting.
 
Two system - Harnessing the movement of mobile platafoma , caused by the unevenness constant as a function of the waves :
Composed of a fixed base , just above the mobile platform , fixed on the main deck between the four pillars , has as main piece a rack, which connects the mobile platform of the first system .
This rack finds herself trapped in her bottom on the bracket which in turn is fixed to the top of the first floating platform system. As the movement up and down the rack, which passes through a guide fixed on the platform of the system to which it belongs , this drives a gear which in turn moves the other two larger gears until you reach the generator. As the toothed rack has two faces , then this triggers two sets of power generation.
The second gearing system , this system is similar to the gear system 1, which enhance and increase the speed of the movement generated initially , until the generator. The design of the pieces was made freely , just as representation , therefore, without any calculation .
The movement of the movable platform located below the fixed platform , makes the rack move jointly , up and down , engaging the two generators.
It has coverage in capsule form elipitica to proeteger entire system , having a port therein and a lateral window on the front side.
In addition, the top of this kind of capsule , there is a dome , also provided with illumination whose primary function is to pass rack to a certain height, there may be situations where the ceiling height of the capsule is not sufficient .
 Third System Wind power provided by the set of vanes located on top of the fixed platform .
This wind energy system , located at the top of the main deck , is composed of four set of propellers that aim to produce movements alert by wind.
Cojunto main propeller , the two main assemblies , each comprised of large propellers are on the market , are located at the two ends of the tube, one in front and one behind . This tube in turn , finds itself on the very top of the curvature of the pillars of the main platform . of
Set the propeller part of the toothed pulley , this pulley, connected on the same axis of the two main sets has a dual function . In addition to transferring the movement of all sets of helices itself has a set of vanes inside the toothed pulley . Thus, air entering the nozzle is forced before reaching the nip the propellers, s why with greater intensity. Surely , does much to complement the two sets of main propellers .
Set of auxiliary propeller - Located in narrowing d inner lining and the output of this , this set of hélizes leverages compressed air output to assist in the movement of the shaft are installed in all sets of propellers .
 In it is also installed in the middle of a set of propellers in a toothed pulley , and behind , the fourth set of propellers , the lowest of all .
All four sets of helices are attached on the shaft , the tube passing through the curve at the junction of the pillars , both on one side and the other.
Thus, when the wind drives the two large sets of main propellers external also triggers the third helix of the pulley assembly , the alert entry nozzle which faces the cover. This air is compressed by a narrowing channel lining , also actuates the fourth set of vanes which is on the air outlet .
The movement generated by the four sets of helices , is transmitted to a set of two gears, which in turn transfers this motion to another pulley of equal size , and which lies installed in a ring which surrounds the inner channel of the cover .
The Grandel ring channel surrounding the liner , through which the air passes , part of the framework supporting the set of gears which in turn connects to the generator. This ring is supported by two brackets which are in the front and rear gear set , thus supporting the entire weight of the canal and relieving the inner lining .
You think that this ring is installed acomplada toothed pulley that has a gear that this solidarity , transmits the movement to end the gear generator.
Theoretically the wind energy production of this platform is much higher than conventional wind generator , which has only a set of giant propellers . Already this project has two sets of giant propellers , one in front and another behind the fixed platform , in addition to two sets of auxiliary propellers .
And to complement the potential of this platform producer of electricity , sum up the wind system , the first system with a large and long helix, with two generators at both ends , which takes advantage of the motion of the waves , and the second system rack equipped also with two generators , as this has toothed surfaces on both sides , which takes advantage of the movement up and down of the first floating platform system.
This project was designed for the display of an idea , a concept of energy production combining the use of ocean waves and eolica , all on one platform , so that , because of that , the project was done freely , without any calculation , just using criteria based on observations and some knowledge without however have some expertise in calculations or mechanical .
In practice , the project would have to be completely revised , by scaling the entire set , with calculations done by professionals .
The text was written in Portuguese and automatically translated by google translator. Because of this , you may leave a few words out of context .
If there is anyone who wants to get in as long for further information on the project , let the available email isarts3d@gmail.com