Thingiverse
Compressed Air Engine by TomStanton
by Thingiverse
Last crawled date: 3 years, 1 month ago
Please use this product at your own risk and always wear eye and ear protection!
Do not pressurise this engine without carrying out safe pressure tests. 3D print qualities vary and will not guarantee that the bottle cap/cylinder head can cope with high pressures.
Build video:https://www.youtube.com/watch?v=YLPY8CY5Fm4
As I mention in the video, I am working on the lid mount cylinder head for this engine, so stay tuned for that!
Print settings:
Nozzle diameter - 0.2mm
Print width - 0.25mm
Layer height - 0.1mm
Top/Bottom layers - 6
Outer walls - 6
Infill - 50%
Infill type - Rectilinear
Material - PLA
Print speed - 50mm/s
Nozzle Temperature - 220c
Bed temperature - 40c
*These settings are required for this print. The other settings can be changed depending on your printer/filament.
All parts are oriented in the correct print direction and the following parts require support:
Crankcase
Cylinder
Piston
Hardware required:
6pcs M2x10 Bolt
1pc M2x20 Bolt
1pc M3x25 Bolt
1pc 608 ceramic hybrid bearing
1pc Plastic bottle
1pc Presta valve (for tubeless tyres)
2pcs Pneumatic fittings (https://goo.gl/5mCG8a)
1pc Propeller (at least 8 inch in diameter)
1pc Rubber O-ring OD 8mm Cross section 2mm
1pc 6mm BB pellet
Brass tube ID 2mm OD 3mm (only need 6mm length)
PVC clear tube ID 4mm OD 6mm
0.5mm thick rubber sheet
2.5mm thick rubber sheet
Bike pump or compressor
Tools/other building equipment:
CA glue (superglue)
Silicone spray lubricant (WD40 sell some with a yellow cap)
1200 grit wet/dry sand paper
Scissors
Vice or clamp
1.5mm Hex driver
2mm Hex driver
Drill & 6mm drill bit
Do not pressurise this engine without carrying out safe pressure tests. 3D print qualities vary and will not guarantee that the bottle cap/cylinder head can cope with high pressures.
Build video:https://www.youtube.com/watch?v=YLPY8CY5Fm4
As I mention in the video, I am working on the lid mount cylinder head for this engine, so stay tuned for that!
Print settings:
Nozzle diameter - 0.2mm
Print width - 0.25mm
Layer height - 0.1mm
Top/Bottom layers - 6
Outer walls - 6
Infill - 50%
Infill type - Rectilinear
Material - PLA
Print speed - 50mm/s
Nozzle Temperature - 220c
Bed temperature - 40c
*These settings are required for this print. The other settings can be changed depending on your printer/filament.
All parts are oriented in the correct print direction and the following parts require support:
Crankcase
Cylinder
Piston
Hardware required:
6pcs M2x10 Bolt
1pc M2x20 Bolt
1pc M3x25 Bolt
1pc 608 ceramic hybrid bearing
1pc Plastic bottle
1pc Presta valve (for tubeless tyres)
2pcs Pneumatic fittings (https://goo.gl/5mCG8a)
1pc Propeller (at least 8 inch in diameter)
1pc Rubber O-ring OD 8mm Cross section 2mm
1pc 6mm BB pellet
Brass tube ID 2mm OD 3mm (only need 6mm length)
PVC clear tube ID 4mm OD 6mm
0.5mm thick rubber sheet
2.5mm thick rubber sheet
Bike pump or compressor
Tools/other building equipment:
CA glue (superglue)
Silicone spray lubricant (WD40 sell some with a yellow cap)
1200 grit wet/dry sand paper
Scissors
Vice or clamp
1.5mm Hex driver
2mm Hex driver
Drill & 6mm drill bit
Similar models
grabcad
free
Compressed Air Engine
... with a yellow cap)
1200 grit wet/dry sand paper
scissors
vice or clamp
1.5mm hex driver
2mm hex driver
drill & 6mm drill bit
thingiverse
free
Diaphragm Air Engine by TomStanton
...or the engine won't run. i've attached an image of the length (brass tube 4mm from piston top, pin 10mm from piston top).
thingiverse
free
Fully 3D Printed Air Engine
...ropeller (at least 8 inch in diameter)
1pc rubber o-ring od 8mm cross section 2mm
bike pump or compressor
fusion file is attached
thingiverse
free
6mm OD to 11mm OD adapter by Maxovitsj
...n adapter to go from 6mm (outer diameter) to 11mm (outer diameter) tubing. use a small nus and bolts to clamp the tubes in place.
thingiverse
free
Bottle Cap/Lid with Larger/Stronger Siphon - ID6mm / OD8mm by Astroxyn
...cone tubes but also tried with id 7mm & id 8mm
6x10 tubes from aliexpress
7x9 tubes from aliexpress
printed in creozone-petg.
3dwarehouse
free
Gas cylinder
...om to reduce noise when setting it down on the ground. #bottle #cylinder #danger_sign #gas #nozzle #pressure #propane #tank #tube
thingiverse
free
Tube Cap by Vincemacpaul
...tube cap by vincemacpaul
thingiverse
tube cap for 1" od, .902 id, 18 ga wall thickness (.049") ss tube.
thingiverse
free
PETG / Bowden Clip OD 6mm
...od 6mm
thingiverse
simple clip for two petg or bowden tubes.
made for tubes with 6mm outer diameter.
no need of infill or rafts.
thingiverse
free
10" Ringlight Bracket for Ikea Tertial by bobby41
...'s side (stronger).
there is a 2mm hole on the side for the screw that you can drill out for the size screw you have on hand.
thingiverse
free
Swing Top Cap for beer bottle (1 inch) by DanRom624
... 1" diameter rubber gasket (25mm) with 10mm hole
designed with onshape. look for "swing top cap", it's public.
Tomstanton
thingiverse
free
TSX200 HS1177 Camera Bracket by TomStanton
...tsx200 hs1177 camera bracket by tomstanton
thingiverse
tsx200 hs1177 fpv camera bracket
thingiverse
free
Stanton Frames TSX200 GoPro Mount by TomStanton
...stanton frames tsx200 gopro mount by tomstanton
thingiverse
gopro mount for a tsx200 frame (www.stantonframes.co.uk)
thingiverse
free
TSX Frame GoPro Mount V2 by TomStanton
...tsx frame gopro mount v2 by tomstanton
thingiverse
v2 35 degree gopro mount for a tsx frame (www.stantonframes.co.uk)
thingiverse
free
TSX Frame GoPro 30 Degree Mount by TomStanton
...tsx frame gopro 30 degree mount by tomstanton
thingiverse
30 degree gopro mount for a tsx frame (www.stantonframes.co.uk)
thingiverse
free
TSX Frame GoPro 40 Degree Mount by TomStanton
...tsx frame gopro 40 degree mount by tomstanton
thingiverse
40 degree gopro mount for a tsx frame (www.stantonframes.co.uk)
thingiverse
free
TSX Frame GoPro 25 Degree Mount by TomStanton
...tsx frame gopro 25 degree mount by tomstanton
thingiverse
25 degree gopro mount for a tsx frame (www.stantonframes.co.uk)
thingiverse
free
TSX Frame GoPro 35 Degree Mount by TomStanton
...tsx frame gopro 35 degree mount by tomstanton
thingiverse
35 degree gopro mount for a tsx frame (www.stantonframes.co.uk)
thingiverse
free
HS1177 Mount - Stanton Frames by TomStanton
...ra with a tsx mini quad frame (www.stantonframes.co.uk)
you will require longer self tapping screws (5-6mm) to secure the hs1177.
thingiverse
free
Emax 2205 motor protectors by TomStanton
... they pop off.
clip on like this: https://www.youtube.com/watch?v=wron-nuuwwi
i printed with abs, 100% infill, 0.2mm layer height
thingiverse
free
3D Printed wing by TomStanton
... and wingspan of the print is 200mm, but can be added together for any chosen length.
https://www.youtube.com/watch?v=lowlw4bzndw
Compressed
turbosquid
$20
compresser
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$4
Compression Tap
...for download as blend, gltf, obj, stl, dae, fbx, wrl, and usd on turbosquid: 3d models for games, architecture, videos. (1650763)
turbosquid
$7
Compression reducing tee
...ty free 3d model compression reducing tee for download as max on turbosquid: 3d models for games, architecture, videos. (1540313)
3d_export
$5
Mustang Compressed blend
...mustang compressed blend
3dexport
turbosquid
$19
Compression hips trainer
... compression hips trainer for download as , fbx, stl, and obj on turbosquid: 3d models for games, architecture, videos. (1684685)
turbosquid
$10
Compressed air station
...compressed air station for download as max, 3ds, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1598414)
turbosquid
$35
Compressed-air Engine
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$19
Concrete Compression Tester
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$4
Compression TAP worn
...for download as blend, usd, dae, gltf, fbx, obj, stl, and wrl on turbosquid: 3d models for games, architecture, videos. (1652641)
turbosquid
$49
Compressed Gas Cylinder and Regulator
...odel compressed gas cylinder and regulator for download as ma on turbosquid: 3d models for games, architecture, videos. (1170670)
Air
3ddd
$1
Calligaris air
...calligaris air
3ddd
air , calligaris
cтул calligaris air
3ddd
$1
Air freshener
...air freshener
3ddd
air freshener , освежитель
air freshener
design_connected
$16
Air
...air
designconnected
flexform air lounge chairs computer generated 3d model. designed by antonio citterio.
turbosquid
$250
Heat pump air air
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
air
...air
3dexport
3ddd
$1
Кухня AIR
...кухня air
3ddd
air , мария
кухня air фабрики "мария"
3ddd
$1
Лампа AIR
...лампа air
3ddd
boconcept , air
настольная лампа air, boconcept. в50½xø32см
3d_export
$40
air deflector
...air deflector
3dexport
air deflector
3d_export
$15
air purifier
...air purifier
3dexport
air purifier
3d_export
$5
macbook air
...macbook air
3dexport
macbook air
Engine
3d_export
$5
engine
...engine
3dexport
engine
3d_export
free
Engine
...engine
3dexport
engine
archibase_planet
free
Engine
...engine
archibase planet
motor engine
engine - 3d model for interior 3d visualization.
archibase_planet
free
Engine
...engine
archibase planet
motor engine mover
engine n170708 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Engine
...engine
archibase planet
engine locomotive train
locomotive - 3d model for interior 3d visualization.
turbosquid
$49
ENGINE
...
turbosquid
royalty free 3d model engine for download as max on turbosquid: 3d models for games, architecture, videos. (1206116)
turbosquid
$1
ENGINE
...osquid
royalty free 3d model ic engine for download as sldas on turbosquid: 3d models for games, architecture, videos. (1382781)
3d_export
$5
engine
...engine
3dexport
3d_export
free
engine
...engine
3dexport
turbosquid
$7
Engine
...d model animated engine mograph element3d for download as c4d on turbosquid: 3d models for games, architecture, videos. (1380716)