Compact Watercolor Pan Palette Box by MetaPerfect

Last crawled date: 3 years, 4 months ago

Compact watercolor palette box + lid / tray
Multiple boxes and lids can be stacked on top of each other in any order.
Tested with White Nights full/half pans from Nevskaya Palitra (Saint Petersburg).
For other brands, you can prototype a 1x1 box and see if your pan fits.
See customization options below.
The 7x5 size holds almost as many pans as this box but is much more compact.
Attached is also the Fusion 360 file for customization:
https://grabcad.com/library/compact-watercolor-pan-palette-box-1
most changes can be done directly from Change Parameters
number of full-pans can be changed from RowCount and ColumnCount
in case the pan has vertical walls, the lip can be discarded by setting LipHeight to something like 0.001 mm
though probably unnecessary, the pan size can be adjusted using PanWidth and PanLength
tolerances for stacking can be adjusted using RimTolerance
the lid could be sectioned for color mixing
I needed to sand the sides a bit to fit the boxes & lids together, but I'd say that's due to my printer calibration and not the tolerances, but feel free to customize.