Thingiverse
Compact compund planetary reducer (40:1) by ErikRudec
by Thingiverse
Last crawled date: 3 years, 1 month ago
WARNING: print at your own risk, pieces may not fit without sanding!!!
Compound planetary reducer for NEMA17 (40:1)
Enclosed version with all tolerances adjusted for 3D printing!
About:
This reducer is designed to be mounted on top of a NEMA 17 standard stepper motor. It has a high reduction ratio of 40:1 in a very small package (only 17mm tall, and sized the same as NEMA17 motors (width and length of the housing).
Gear ratio: 40:1
Functioning principle explanation:
This system consists of 2 rings with inside gearing, one is fixed and the second is the output ring. All three planet gears are driven by the sun gear, and engage both rings at the same time.Each revolution of the planet carrier (here non-existent, but imagine it's there for the sake of easier explanation) will move the outer ring by 3 teeth (in the direction of the motor).
Additional parts:
The most important part you will need to successfully assemble this is a R-1650ZZ bearing (or similar, 5x16x5), the bearing should be press fitted into the output flange and onto the motor shaft. You will need at least 4 M3 screws to fasten this to the motor, and adittional 4 screws to fasten the cover plate.
NOTES:
If you plan to use this as a part of a functional mechanism, use plenty of grease or other lubricant!
Drawing with main dimensions:
Compound planetary reducer for NEMA17 (40:1)
Enclosed version with all tolerances adjusted for 3D printing!
About:
This reducer is designed to be mounted on top of a NEMA 17 standard stepper motor. It has a high reduction ratio of 40:1 in a very small package (only 17mm tall, and sized the same as NEMA17 motors (width and length of the housing).
Gear ratio: 40:1
Functioning principle explanation:
This system consists of 2 rings with inside gearing, one is fixed and the second is the output ring. All three planet gears are driven by the sun gear, and engage both rings at the same time.Each revolution of the planet carrier (here non-existent, but imagine it's there for the sake of easier explanation) will move the outer ring by 3 teeth (in the direction of the motor).
Additional parts:
The most important part you will need to successfully assemble this is a R-1650ZZ bearing (or similar, 5x16x5), the bearing should be press fitted into the output flange and onto the motor shaft. You will need at least 4 M3 screws to fasten this to the motor, and adittional 4 screws to fasten the cover plate.
NOTES:
If you plan to use this as a part of a functional mechanism, use plenty of grease or other lubricant!
Drawing with main dimensions:
Similar models
thingiverse
free
Planetary extruder by matsuragi
...agi
thingiverse
planetary geared extruder for nema17 motor with 9:46 or 1:5.1(1) reduction ratio. for better work need use lube.
thingiverse
free
NEMA 23 Planetary gearbox reducer, 1:3.333 ratio by ErikRudec
...ication is essential - you should not run the gears dry or the planets will bind to the carrier. apply a lot of lubricant grease.
thingiverse
free
Compact planetary gearbox by Trigubovich
...er successfully divide into separate parts
https://www.youtube.com/watch?v=n0sx_dkga7ehttps://www.youtube.com/watch?v=socjktaaa30
thingiverse
free
A2212 Brushless Planet Gear by UsernameSign
...atio per stack.
some of the parts still use the original version, so please go to the original post to download the files needed.
thingiverse
free
Planetary gearbox 1:232.5 for 130 motor by ekowi
...the carrier
20mm x4 for joining annulus to motor support
30mm (+ 1 nut) for main axle
a 36mm i.d. x 3mm o-ring is used as a tire.
thingiverse
free
NEMA23 planetary gearbox with an encoder mount, 3.333 gear reduction ratio by ErikRudec
...ication is essential - you should not run the gears dry or the planets will bind to the carrier. apply a lot of lubricant grease.
thingiverse
free
Differential Planetary Gearset by emmett
...nt to print than the last version, and the only assembly required is placing the output ring onto the upper planets of the input.
thingiverse
free
Geared hub for OpenRC tractor motor mod by beast_c_a_t
...l hubcaps.
needed hardware:
12 12x8x3.5 mr128 ball bearings
16 m3x12mm socket cap screws
8 m2x8mm socket cap screws
thingiverse
free
Planetary gearbox for bowden extruder by Trigubovich
...ded front bearing cover
bearing size: 16x5x5
working test:https://youtu.be/vj3kstcmuichttps://www.youtube.com/watch?v=f9w7_ddmt64
thingiverse
free
Robot joint gear strong 123:1 with herringbone by spacecap
... gear: 26
output gear: 100
input gear: 97
ratio strain wave: 100/3 = 33
ratio planet: 97/26 = 3.73
ratio total: 3.73 x 33 = 1:123
Compund
thingiverse
free
the real compund by mbickham1423
...the real compund by mbickham1423
thingiverse
scanned with the makerbot digitizer desktop 3d scanner
thingiverse
free
Compund Slide Table Wheel by TrinketTinkerer
...ly slip on over the existing wheel, and secure with a bolt. i find the larger diameter more comfortable and allows finer control.
thingiverse
free
Youth Compound Bow by Firebird
...youth compound bow by firebird thingiverse compund bow for kids (8-12) draw weight 17-33lbs draw length...
thingiverse
free
Bow Adapter SIL Hybrid -> Man Kung AURORA CB50 by schnuffi84
...a bow adapter for the very cheap man kung compund bow. i bought it for 100euro. together with the...
thingiverse
free
Tire for Latrax(new) rally car by Ze_Racing
...it is rather stiff. it ends up close to d(drift)-compund but it's still fun. i would not print this...
thingiverse
free
Nameplate / Doorsign 8x5cm by VecteR
...it on top of the plate and created a compund instead of performing a boolean join. after exporting the...
thingiverse
free
CTC I3 Belt Tensioner by Xynter
...that matches the bearing id and use some locking compund that also requires you to shorten the mounting tube....
Erikrudec
thingiverse
free
Belt tensioner by ErikRudec
...belt tensioner by erikrudec
thingiverse
provided as is, no further development.
thingiverse
free
Thrust bearing experiment by ErikRudec
...thrust bearing experiment by erikrudec
thingiverse
provided as is, no further development.
thingiverse
free
Sun shade spike by ErikRudec
...sun shade spike by erikrudec
thingiverse
sun shade replacement spike
thingiverse
free
M8, LM10UU Linear Carriage by ErikRudec
...m8, lm10uu linear carriage by erikrudec
thingiverse
provided as is, no further development.
thingiverse
free
Air filter fan mount by ErikRudec
...air filter fan mount by erikrudec
thingiverse
air filter fan mount
thingiverse
free
Box corner joints/protectors by ErikRudec
...box corner joints/protectors by erikrudec
thingiverse
box corner joints/protectors
thingiverse
free
Hot glue stick extruder by ErikRudec
...hot glue stick extruder by erikrudec
thingiverse
provided as is. no further development at this time.
thingiverse
free
String trimmer replacement part by ErikRudec
...string trimmer replacement part by erikrudec
thingiverse
grass string trimmer replacement part
thingiverse
free
Linear actuator carriage by ErikRudec
...linear actuator carriage by erikrudec
thingiverse
linear actuator concept. carriage fits inside a pipe with a section cut out.
thingiverse
free
GEEEtech extruder mount by ErikRudec
...truder mount by erikrudec
thingiverse
replacement for mounting e3d style extruders on the stock carriage of geeetech i3 printers
Planetary
thingiverse
free
Planetarier by mots
...planetarier by mots
thingiverse
de es schwertberger - planetarier, 2000.
scanned in mariahilf, vienna.
www.dees.at
thingiverse
free
planetary gear by sweetwalla
...planetary gear by sweetwalla
thingiverse
simpe planetary gear
thingiverse
free
Planetary Gear by drmax
...planetary gear by drmax
thingiverse
planetary gear with 5 planets.
thingiverse
free
Planetary Gearset by Watsicus
...and a ring gear. in this case there are 3 planet gears.
a major application of planetary gearsets are in automatic transmissions.
thingiverse
free
planetary gearbox
...netary gearbox that can fir in the palm of your hand. the gearbox is printed as one part and will not come apart after printing!!
thingiverse
free
Planetary Mechanism by dc_dweller
...planetary mechanism by dc_dweller
thingiverse
this is a simple 3-planet planetary mechanism with involute gears.
thingiverse
free
Planetary Gear by Cranky
...planetary gear by cranky
thingiverse
this is a functional planetary gear i designed to sit on my desk and look pretty. =)
thingiverse
free
Gear planetary by DViktor
...ar planetary by dviktor
thingiverse
is a planetary gear extruder 1: 4
at the moment the extruder gearbox installed version 1:16
thingiverse
free
Planetary gear by jakpor
...ear by jakpor
thingiverse
planetary gear model created in openscad based on library from: http://www.thingiverse.com/thing:3575.
thingiverse
free
FreeCAD Planetary Fan by mitswan
...freecad planetary fan by mitswan
thingiverse
this is a print in place planetary fan design
Compact
thingiverse
free
Compact Foldable Spool / Bobine pliable compacte by Z122
...able compacte by z122
thingiverse
compact foldable spool for holding filaments
bobine pliable compacte pour tenir des filaments
thingiverse
free
Dock Z3 Compact by
...dock z3 compact by
thingiverse
z3 compact dock station
thingiverse
free
Compact knuckle by Gepetto
...compact knuckle by gepetto
thingiverse
compact knuckle for self defense
thingiverse
free
powder compact by Torisch
...powder compact by torisch
thingiverse
a little powder compact for the doll of my daugther
thingiverse
free
Drumkey - compact and simple
...drumkey - compact and simple
thingiverse
simple, but effective drumkey.
compact, so less material.
thingiverse
free
Compact floor drain
... into a 110 mm tube, with integrated odour
closure device.
found no commercial solution that was compact enough for my situation.
thingiverse
free
compact lcd by Jeefse
...compact lcd by jeefse
thingiverse
downloaded compact lcd,and found mirroring ,had to redo it.here is the result.
thingiverse
free
Compact Phone Stand
...compact phone stand
thingiverse
print in place two part model that transforms between a stand and a compact flat slab.
thingiverse
free
Seek Thermal Compact
...mal compact
thingiverse
a model of the seek thermal compact thermal imaging camera. designed to make cases for holding the same.
thingiverse
free
compact hot end by Jody_T
...compact hot end by jody_t
thingiverse
compact hot end with bltouch
40
thingiverse
free
40
...40
thingiverse
40
thingiverse
free
40 x 40 box by mettinoktay
...40 x 40 box by mettinoktay
thingiverse
a simple cubic box of 40 mm to put a gift in.
thingiverse
free
AM8 40/40 by CyberSNico
...am8 40/40 by cybersnico
thingiverse
35% infill
0.4mm nozzle
0.2 layer heigh
thingiverse
free
Soporte Ventilador 40 x 40 by Nube_Negra
...soporte ventilador 40 x 40 by nube_negra
thingiverse
soporte ventilador 40 x 40 para impresora prusa 3d
thingiverse
free
90° connector for two 40*40 profiles
...90° connector for two 40*40 profiles
thingiverse
if you have two 40*40 profiles you can connect them with this
thingiverse
free
lustrum 40
...lustrum 40
thingiverse
40 th
lustrum sd charitas
thingiverse
free
Nozzle fan 40 x 40 mm by cepera3000
...nozzle fan 40 x 40 mm by cepera3000
thingiverse
nozzle fan 40 x 40 mm
thingiverse
free
Test print 40 x 40
...test print 40 x 40
thingiverse
a simple test model for 3d printing
thingiverse
free
3dpBurner 40*40 laser mount by lufton
...3dpburner 40*40 laser mount by lufton
thingiverse
this is a 40*40mm 3.5w laser module mount designed for 3dpburner project.
thingiverse
free
Fan 40 x 40 mount by Genapart
...cooling
fixing with screws and nuts m3
dimensions and other parts available on this site:http://www.genapart.com/blog/ressources/
Reducer
thingiverse
free
Gear Reducer
...gear reducer
thingiverse
gear reducer
https://youtu.be/jmjajszl-rg
thingiverse
free
blender reducer by Simirinojka
...blender reducer by simirinojka
thingiverse
blender reducer
thingiverse
free
PVC Reducing by thanaphan
...pvc reducing by thanaphan
thingiverse
pvc pipe reducing
thingiverse
free
Reducer Bolt by ogsupro
...reducer bolt by ogsupro
thingiverse
thingiverse
free
Ryobi Vacuum Reducer by jotaki318
...ryobi vacuum reducer by jotaki318
thingiverse
2in vacuum hose reducer
used to reduce dewalt planer to ryobi 2.5 gal handy-vac.
thingiverse
free
reducer couplers for Reddit by Matthewdavidson4245
...reducer couplers for reddit by matthewdavidson4245
thingiverse
reducer couplers for a reddit user.
thingiverse
free
Monkey witcher (reduced) by puzon
...monkey witcher (reduced) by puzon
thingiverse
reduced model to 50k triangles.
thingiverse
free
Reducer 52-40mm by Daastoel
...reducer 52-40mm by daastoel
thingiverse
hose reducer 52-40mm
thingiverse
free
RC Paramotor engine reducer
...be used on the rc paramotor (https://www.thingiverse.com/thing:3532495)
the reducer is for 16mmx19mm to 25mm engine mounting mesh
thingiverse
free
reducer by olemin
...reducer by olemin
thingiverse
to be able to use printer as pcb egraver, need more resolution
used gear 60 and 20
1
thingiverse
free
Magic Token +1/+1 & -1/-1 by Kilgara2B
...magic token +1/+1 & -1/-1 by kilgara2b
thingiverse
a magic the gathering token +1/+1 and -1/-1
thingiverse
free
MTG +1/+1 and -1/-1 counters by 4PStudiosGaming
...tudiosgaming
thingiverse
if you are in need of the 4pstudiosgaming +1/+1 and -1/-1 counters, then you came to the right page :-p
thingiverse
free
Fraction circle 1/2, 1/3, 1/4, 1/6, 1/8, 1/10, 1/12 by tfloveless
... 1/6, 1/8, 1/10, and 1/12 sized wedges as well as a circular base for them to fit onto. there are no labels on any of the pieces.
thingiverse
free
Adapter Syphon - 1 1/4" to 1 1/2" by _Stefano17_
...dapter for syphon - 1 1/4" to 1 1/2" h10,5mm
the project was realized with tolerances for printing with abs + tape ptf.
thingiverse
free
1 1/8" and or 1 1/5" headset press
...l fit both 1 1/8" and 1 1/5" bearing cups. i used a 3/8ths" threaded rod with nuts and thick washers on each end.
thingiverse
free
1-1/4" to 1-1/2" pipe cheeseborough clamp by aonomus
...design cheeseborough clamp for hanging lightfixtures and other items onto 1-1/4"-1-1/2" npt pipe. use at your own risk.
thingiverse
free
Shopping cart tokens 1€ 1$ 1£ by I_am_me
...them instead of money coin in your supermarket cart or in your swimming pool locker.
edit : updated 1£ coin with new dimensions
thingiverse
free
pipe thread adapter 1" to 1" 1/4 by Printerforever
...d adapter 1" to 1" 1/4 by printerforever
thingiverse
this is an adapter 1" to 1" 1/4 (male to male)
enjoy !
thingiverse
free
Playstation 2, 1:1 by Vitting
...playstation 2, 1:1 by vitting
thingiverse
made a 1:1 playstation 2.
thingiverse
free
Nesting Fraction Circle 1/2, 1/3, 1/4, 1/6, 1/8, 1/10, 1/12 V.2 by tfloveless
...re thinner and actually fit within each other to show equivalent fractions. also, check out the same version with braille (here).