Thingiverse
Color Maximite 2 Case (A.K.A. Colour Maximite 2) by Jeff5263
by Thingiverse
Last crawled date: 3 years, 3 months ago
The last time I checked there wasn't a case designed for the Color Maximite 2 so here ya go.
The board is secured using 4 m2 x 4mm screws (with slightly larger heads) and two m2 x 8mm screws for the case top. Supports are not needed. The entire print time is estimated around 9-10 hours on my Monoprice Maker Select v2.
My Color Maximite 2 did not have a power switch. The leads on the board were soldered closed. So, I have some small switches that I have not yet installed. Here's a link on eBay for the ones I have...
https://www.ebay.com/itm/Black-20pcs-5V-0-3A-SS12F32-Mini-SPDT-Slide-Switch-for-Small-DIY-Power-AD-n-j/363061216506
Since my CMM2 did not have the power switch I could not design a hole for it. I could make a 2nd front panel with a rough oversized opening if anyone wants one.
UPDATE:I modified the case to reduce the gaps on the front and rear so all ports are closer to the openings. I also removed the air vents from the top and put them on the sides of the bottom part. This is so you can stick a small breadboard on top if so desired. Print support is not needed for any part and the original front & rear parts fit the updated case.
The board is secured using 4 m2 x 4mm screws (with slightly larger heads) and two m2 x 8mm screws for the case top. Supports are not needed. The entire print time is estimated around 9-10 hours on my Monoprice Maker Select v2.
My Color Maximite 2 did not have a power switch. The leads on the board were soldered closed. So, I have some small switches that I have not yet installed. Here's a link on eBay for the ones I have...
https://www.ebay.com/itm/Black-20pcs-5V-0-3A-SS12F32-Mini-SPDT-Slide-Switch-for-Small-DIY-Power-AD-n-j/363061216506
Since my CMM2 did not have the power switch I could not design a hole for it. I could make a 2nd front panel with a rough oversized opening if anyone wants one.
UPDATE:I modified the case to reduce the gaps on the front and rear so all ports are closer to the openings. I also removed the air vents from the top and put them on the sides of the bottom part. This is so you can stick a small breadboard on top if so desired. Print support is not needed for any part and the original front & rear parts fit the updated case.
Similar models
thingiverse
free
Color Maximite 2 (CMM2) - CASE by Shaputer
...avy duty usb cable to power the board. an inadequate usb power cable can cause a lot of problems. mainly keyboard malfunctions.
thingiverse
free
Colour Maximite 2 - Retromax Case by Nelno
...ase and working back.
snap the rear, triangular wedges into the slots along the back of the case.
that's it, you're done!
thingiverse
free
Servo Tester Case by MakerDan55
...switch on the top).
plug in a servo and test it out!
i sanded and spray painted my case to get rid of the rough plastic surface.
thingiverse
free
360W Power Supply Cover and Mount by CPT_Spekkie
...s mounted with one screw in the top position and the middle channel and bottom channel are used to run my wires to the mainboard.
thingiverse
free
Modified Vent for "The Stack - Modular Raspberry Pi Case", with holes for switch and a 3.5 mm connector by gamusino
...ilicone pistol, could have added some m2 screw supports to the design, but hot silicone is faster and easier.
thanks, chordless.
thingiverse
free
Anet 8 Z switch mount
...e for bigger wires.i added a guset to the rear to pull it away fron the z motor for more wire room. i elongated the screw holes.
thingiverse
free
Pure Thermal 2 case (for Lepton FLIR) by diodenring
...e cover can be glued on with a bit of superglue. if necessary, the top can be broken off later to retireve the board for updates.
thingiverse
free
Remixed Pi 3 NES case bottom with Powerblock by LaneLibraryTechCenter
... micro usb cap and made it with ninjaflex filament, then stuck it over the original power adapter location of the raspberry pi 3.
thingiverse
free
3uP Power Jack & Switch Box by BPopilek
...aving it as is in case you ever needed to repair the wiring. enjoy and let me know if there are any changes that need to be made.
thingiverse
free
Solidoodle 2 Power Switch (case) by rwiltgen
...t fit. before exporting the stl file i did tweak the brim so i never tested the final-final design.
please share your experience.
Maximite
thingiverse
free
TFT-Maximite by zille9
...tft-maximite by zille9
thingiverse
tft-maximite housing with stand and sd-card-holder
thingiverse
free
MAXIMITE CASE by smartfin
...maximite case by smartfin
thingiverse
fusion 360 design
small pieces
thingiverse
free
Panels for Gainta G738 box for Colour Maximite by Astrolux
...ls for gainta g738 box for colour maximite by astrolux
thingiverse
front and rear panels for gainta g738 box for colour maximite
thingiverse
free
Panels for Original Maximite in Gainta G1814 Box by Astrolux
... original maximite in gainta g1814 box by astrolux
thingiverse
front and rear panels for gainta g1814 box for original maximite.
thingiverse
free
3D Printed Case for Maximite Retro BASIC Computer by Elproducts
...it board is available here:http://bit.ly/1vpwfy6
my story on making it is on my youtube channel here:https://youtu.be/s3k2dr_ilg0
thingiverse
free
Colour Maximite 2 Tray by bridge2nowhere
...screw holes for mounting and two posts for stability.
you can find details of the computer here: https://geoffg.net/maximite.html
thingiverse
free
Color Maximite 2 (CMM2) - CASE by Shaputer
...avy duty usb cable to power the board. an inadequate usb power cable can cause a lot of problems. mainly keyboard malfunctions.
thingiverse
free
Colour Maximite 2 - Retromax Case by Nelno
...ase and working back.
snap the rear, triangular wedges into the slots along the back of the case.
that's it, you're done!
thingiverse
free
Stardew Valley Farmhouse Succulent Planter by KaceyOrtiz
...by kaceyortiz thingiverse remixed the original farmhouse made by maximite into a succulent planter with drainage. primered with rustoleum...
Jeff5263
thingiverse
free
Chicago Band Logo by Jeff5263
...chicago band logo by jeff5263
thingiverse
i paused the print to change colors.
thingiverse
free
Case for W1209 Temperature Controller (JeffCo) by Jeff5263
...ntroller (jeffco) by jeff5263
thingiverse
protective houseing for w1209 thermostat / temperature controller / temperature alarm.
thingiverse
free
Dual Breadboard Frame (JeffCo) by Jeff5263
...f self-explanatory. i removed only the paper backing that would allow the breadboard to adhere to the frame using an xacto blade.
thingiverse
free
20x4 I2C LCD Display Case (JeffCo) by Jeff5263
...20x4 i2c lcd display case (jeffco) by jeff5263
thingiverse
20x4 character display case. requires 4 m2x8 self-tapping screws.
thingiverse
free
Screwdriver Bit Holder by Jeff5263
...infill with no problems at all.
print time on my creality ender 3 v2 was 19 hours and 19 minutes.
i set my wall line count to 5
thingiverse
free
Ceiling Fan Chain Pulls (Pull Chain Handles) by Jeff5263
...ard 3.2mm beaded pull chains. the hole is big enough for the chain but not the coupler attached to the end. no support is needed.
thingiverse
free
Test Tube Rack for 12mmx100mm tubes (JeffCo) by Jeff5263
...m-12-100mm-white-stoppers-clear-plastic-test-tubes-lab-teaching-pop-hl/282860634640?hash=item41dbcec210:m:mnealspekp0ywzms3jgt1nw
thingiverse
free
Pill Bottle Screw Organizer by Jeff5263
... with 3/8".
i suggest using white or other bright color of filament to help make the screws more visible through the bottle.
thingiverse
free
2018 Christmas Decorations/Ornaments (JeffCo) by Jeff5263
...ort. the latest release of cura lets you block supports in parts of the print. it's very useful.
https://youtu.be/s3vrravonbc
thingiverse
free
Twin Moon Cell Stand (JeffCo) by Jeff5263
... enabled (in cura) to make the circles cleaner. it makes for a little more work in removing supports but i think it was worth it.
K
turbosquid
$1
Swedish-K / K-Pist
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
free
K lamp
...k lamp
3ddd
k lamp
3ddd
free
Giano K
...giano k
3ddd
стеллаж
книжные полки giano k
3ddd
$1
K-table
...k-table
3ddd
henge furniture , письменный
k-table by henge furnitures
design_connected
$13
Thin-K
...thin-k
designconnected
kristalia thin-k computer generated 3d model. designed by bertoncini, luciano.
design_connected
$9
Miss K
...miss k
designconnected
flos miss k table lights computer generated 3d model. designed by philippe cramer.
3ddd
$1
Papatya / Ego-K
...papatya / ego-k
3ddd
papatya
papatya / ego-k
3ddd
$1
DeMajo 2612/K
...demajo 2612/k
3ddd
demajo
люстра demajo 2612/k
turbosquid
$14
Fence K
...turbosquid
royalty free 3d model fence k for download as fbx on turbosquid: 3d models for games, architecture, videos. (1314643)
turbosquid
$7
K for Key
...rbosquid
royalty free 3d model k for key for download as max on turbosquid: 3d models for games, architecture, videos. (1689776)
Colour
3d_export
$5
Diamons colours
...diamons colours
3dexport
diamons colours<br>.blend
design_connected
$16
Add Colour
...add colour
designconnected
stelton add colour computer generated 3d model. designed by jacobsen, arne.
turbosquid
$4
Coloured Pencils
...ty free 3d model coloured pencils for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1702123)
3d_export
free
colour pencils
...colour pencils
3dexport
turbosquid
$5
Colour Train
...ree 3d model colour train for download as obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1504572)
turbosquid
$12
Colour pencil
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Colour pen
...3d model colour pen for download as ma, ma, fbx, obj, and png on turbosquid: 3d models for games, architecture, videos. (1581204)
turbosquid
$9
Coloured vases
...loured vases for download as 3ds, max, obj, c4d, fbx, and skp on turbosquid: 3d models for games, architecture, videos. (1404182)
3ddd
$1
Colour square poufs
...colour square poufs
3ddd
пуф
four colour square poufs: violet, red, pink and yellow.
3ddd
free
KARE / Vintage Coloure
... настенные , часы
настенные часы vintage coloure, kare design
Case
3d_export
$1
case
...case
3dexport
case
archibase_planet
free
Case
...case
archibase planet
showcase show-case glass case
glass-case + cakes - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
showcase show-case glass case
glass-case for chips - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case shelving drawer
case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case rack locker
case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case drawer kitchen furniture
case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case cupboard shelving
glass case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case handbag suitcase
case - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case suitcase
case 5 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
locker case dresser
case - 3d model (*.gsm+*.3ds) for interior 3d visualization.
Color
design_connected
$11
Colors
...colors
designconnected
zanotta colors lounge chairs computer generated 3d model. designed by ilkka suppanen.
3ddd
$1
pillows colors
...pillows colors
3ddd
pillows colors , подушка
pillows colors
3ddd
free
color dress
...3ddd
color dress , манекен , одежда
color dress
3ddd
$1
светильники Colors
... massive , бельгия
светильники massive серия colors, очень веселые
3d_export
$30
color chameleon
...color chameleon
3dexport
color chameleon
3ddd
$1
color vase
...color vase
3ddd
color vase
3d_ocean
$2
color pen
...3d model of color pen. model is based on edge loop topology. all materials are included. model is render ready and ready for use.
3ddd
$1
Color Parquet
...color parquet
3ddd
паркет
color parquet
3ddd
free
color console
...color console
3ddd
консоль
color console
3d_export
$5
Technum Color
...technum color
3dexport
technum color led от imperiumloft https://imperiumloft.ru/dizajn-loft/technum-color-led.html
2
design_connected
$11
No 2
...no 2
designconnected
sibast no 2 computer generated 3d model. designed by sibast, helge.
turbosquid
$6
Cliff Rock 2-2
...uid
royalty free 3d model cliff rock 2-2 for download as obj on turbosquid: 3d models for games, architecture, videos. (1619161)
turbosquid
$29
Book variation 2 2
...3d model book variation 2 2 for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1366868)
turbosquid
$22
Classic baluster (2) (2)
...assic baluster (2) (2) for download as max, obj, fbx, and stl on turbosquid: 3d models for games, architecture, videos. (1483789)
turbosquid
$99
Smilodon 2 Pose 2
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Barrel Barricade 2-2
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$6
Wall Trophy (2) (2)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Tire label 2 of 2
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Кровать, 2 тумбочки, 2 светильника
...кровать, 2 тумбочки, 2 светильника
3ddd
кровать, 2 тумбочки, 2 светильника
нормальное качество
формат 3ds max
без текстур
3ddd
free
Кровать, 2 тумбочки, 2 светильника
...кровать, 2 тумбочки, 2 светильника
3ddd
кровать, 2 тумбочки, 2 светильника
нормальное качество
формат 3ds max
без текстур