Collapsible gas cartridge / cartouche holder by RAPOdesign

Last crawled date: 3 years, 4 months ago

Hi everyone, this is collapsible gas cartridge holder. I couldn't find any good stl, so I created one.
Construction is very easy, you need:
1x - center part
1x - leg - fix
2x - leg - movable
3x - pin - body
3x - pin - nut
with all this parts you can assamble it together. You need only what you printed and little bit of glue for pins. If you need a hint how to assamble everything together, you can check photos of my piece.
Every printer prints little bit different, so if your pins will be too large or too small, you can scale them up or down little bit. Dont forget to scale the nuts to :-).
I printed it in PLA, infill was 75% (for sturdiness), quality was 0,2 mm. Whole thing weights 20 g.
Print legs lying on their side, you will need just one small support on fixed leg (touching buildplate)
Diameter of inner holding cut is 88 mm,
diameter of outer holding cut is 106 mm. It should fit standart large and small cartridges
If you have some question, write me or write commentary.
I will be happy if you share a photo of your print.
If you like it, you can support me and donate some part of bitcoin or litecoin :-).
BTC adress:
325sa1ci2qg79u3MYexuwpDHJKTuN5pZKK
LTC adress:
MMdFBWozhiFq2wLNWU9L4bu4CqmMsXucrT