CNHL 4s 650mah Lipoguard

...po balance jst strap by danlatu thingiverse cnhl 4s 1600 lipo balance jst strap. cnhl 4s 1500 lipo added. made with tpu. enjoy!

... are different dimensions, which will fit: 3s 650mah tattu lipo 3s 450mah cnhl ministar 3s 550 gnb 4s 450 gnb and betafpv enjoy!

...lipo guard tpu thingiverse lipo cover/guard. perfet tight fit for cnhl 1500mah 4s battery.

...lly to keep the battery in and vertically to mount to a quadcopter/drone. i made this for my hglrc xlb145 to protect the battery.

...2mm and 0.1mm resolutions in pla and the finish got really good. using 0.2mm resolution and 20% infill the cover weighs 0.6 grams

...- protector for fpv drone by cibox thingiverse created in fusion 360. protector for my little transtec beetle with dji air unit.

...pv thingiverse lipo balance plug cap suitable for 3s: gnb 520mah (2.1mm) 4s: tattu 650mah (3mm) 6s: tattu r-line 1300mah (4.5mm)

... slowly (20mm/s) as the walls are so thin, supports required, z hop is recommended otherwise the supports will stick to the part.

... mini (cam size 19mm micro) lipo: 3s| 450mah/550mah/650mah 4s| 450mah/550mah/650mah vtx: eachine nanovtx/tbs nano..............

...ctor for 2inch airblade eclair by badmechaaron thingiverse printed in tpu. fits 2s 650mah battery used on an airblade uav eclair

...lipostand lipoguard by cornholio209 thingiverse tpu 215° nozzel 90° bed

...s://www.facebook.com/helicecassee --> check out our youtube channel : https://www.youtube.com/channel/uc-dr9j7laskgq8-8utptlew

... results and to hold the dronekeeper mini snuggly. the design weighs 11.25g, when printed with the parameters as described below.

...po balance jst strap by danlatu thingiverse cnhl 4s 1600 lipo balance jst strap. cnhl 4s 1500 lipo added. made with tpu. enjoy!

...39;t risk running an unprotected battery, stay safe. use the battery condom :) print in tpu with 1mm walls 15% infill supports on

...ted in pla using flexible filament (tpu) did a great result. warning: change the scale to 10% to get the right size for printing.

...2mm and 0.1mm resolutions in pla and the finish got really good. using 0.2mm resolution and 20% infill the cover weighs 0.6 grams

...s used because of shrinkage. soon i'll be uploading two new versions with "full" and "empty" signs on it.

... slowly (20mm/s) as the walls are so thin, supports required, z hop is recommended otherwise the supports will stick to the part.

...battery protection by sparkyjosh thingiverse 5mm thick sleeve for cnhl 6s...

...guard tpu thingiverse lipo cover/guard. perfet tight fit for cnhl 1500mah 4s...

...6000 battery protector by sparkyjosh thingiverse battery protector for cnhl 6s 6000 .2" thick...

...ctor for 2inch airblade eclair by badmechaaron thingiverse printed in tpu. fits 2s 650mah battery used on an airblade uav eclair

.... it is going to be mounted on the bottom of my micro drone so i wanted to give it a little protection from landing on it. enjoy!

...lly to keep the battery in and vertically to mount to a quadcopter/drone. i made this for my hglrc xlb145 to protect the battery.

...- protector for fpv drone by cibox thingiverse created in fusion 360. protector for my little transtec beetle with dji air unit.

...tattu battery 650mah 75c & 95c. everything just fits and is nice and tight. a small piece of double-sided tape on the bottom.

...like mylipo 650mah 11,1v 3s 50c/100c fpv parcour xt30 https://www.mylipo.de/mylipo-650mah111v-3s-50c-100c-fpv-parcour-xt30-95c-china-clogo-200 print with pla and 100%...

...2s battery tray for flexrc miniowl. fits either wide 650mah or long 450mah...

...this battery holder was designed for the gaoneng 3s 650mah lip battery. i am looking to make this a...

...cap suitable for 3s: gnb 520mah (2.1mm) 4s: tattu 650mah (3mm) 6s: tattu r-line 1300mah...

...s. the f-4s is armed with a 20mm autocannon for close-in fighting. the f-4s is based on the prior su-57 of the russian air force.

...4s lipo by produktr thingiverse 4s lipo battery, commonly used in fpv quadracing. greetings, vliegtuig

...1 in 4s tp4056 by robo360 thingiverse charging project for 4s

...i-phone 4s by lost1pain thingiverse i̇ phone 4s

...iphone 4s case by coppola thingiverse simple case for a iphone 4s.

...lipo protector (4s) by jadis92 thingiverse this protector is for 4s lipo 1300mah.

...hoodlid (duplicator 4s ) by kaffetobbe thingiverse for wanhao duplicator 4s hood

...iphone 4s case by chapineagle02 thingiverse a simple iphone 4s case!

...iphone 4s holder by austinproulx thingiverse this is an angled phone holder for the iphone 4s