CNC Vacuum table - 100 X 100 mm by Costa_D 3d model
Warning. This content is not moderated and could be offensive.
m4
3dmdb logo
Thingiverse
CNC Vacuum table - 100 X 100 mm by Costa_D

CNC Vacuum table - 100 X 100 mm by Costa_D

by Thingiverse
Last crawled date: 3 years ago
Print test - YES
Untested with vacuum for function!
Vacuum table - 100 X 100 mm
Last update!
Lower connection. Only O Ring versions . Four versions :
A & B - one and four connections. (use metal connections)
C &D - one and four connection - are now part of the table body.
The 4 mm o ring: If you cant order the exact part... use linear 4 mm o ring - cut it and glue it to size!
0.5mm compression gap between o ring face and table plane.
See link parts below. I do not endorse McMaster. This is just a reference!
https://www.mcmaster.com/#9262k364/=1ca48tw
Oil-Resistant Buna-N O-Ring 4 mm Wide, 60 mm ID
https://www.mcmaster.com/#5361k31/=1ca4a4l
1/4" Hose ID, 1/8 NPT Male End
https://www.mcmaster.com/#4464k251/=1ca4bi6
Low-Pressure, Plug with External Hex Drive, 1/8 NPT
Two prints ABS - Black (0.4mm, 235C, 95C, 20% in fill, 0% Fan, CURA DRAFT- 0.2mm lh) and ASA - Grey (0.6mm. 255C. 115C. 60% in fill, 15 % Fan, CURA DRAFT- 0.2mm lh)
Fell free to support my projects!https://pinshape.com/items/44253-3d-printed-cnc-vacuum-table-100x100mm

Tags