ClimateClock IO shield and Raspberry Pi holder by wsloth3790

Last crawled date: 3 years, 1 month ago

Parts to enhance your Climate Clock from ClimateClock.world/make. Casing fits directly onto the back of Climate Clock LED panels from Adafruit with M3 screws (not included). The casings also have a built in Raspberry Pi holder and wire holes to keep your wires organized and everything in place. Feet to prop up your panels and a cover for the Raspberry Pi are also included in the files list.
Here's what you need to print:
If you are using one panel:
-OnePanel (1/1) x1
If you are using two panels:
-TwoPanels (1/2) x1
-TwoPanels (2/2) x1
If you are using three panels:
-ThreePanels (1/3) x1
-ThreePanels (2/3) x1
-ThreePanels (3/3) x1
You will also need to print:
-PiCover x1
-Pin x4
-Foot x2 (or x3)
Four friction pins are used to affix the Raspberry Pi cover onto the Raspberry Pi mount. Also to screw the panels on you will need 6 M3 screws per panel. I used 8mm M3 screws.
If you see any errors in the model or would like to add a feature, just DM me on Thingiverse here. All files are completely open source, you can use them for any purpose, I don't care.