Clamp-on cupholder (2" ID) by JLipinski

Last crawled date: 3 years, 1 month ago

A clamp-on cupholder designed to fit a 2" outside diameter. Requires:
2x 3/8-16 x 1.5" SHCS https://www.mcmaster.com/91251A628/
2x 3/8-16 Nut https://www.mcmaster.com/95479a118
Should not require supports to print.
Due to size of the cupholder, may be infeasible to print with most printers. Also benefits from using a large diameter nozzle (I used 0.8mm). If this is intended to be used outside in the sun, suggest printing out of ASA due to UV resistance and higher melt temperature compared to PLA. Bed adhesion is critical! Due to the size, many printers may not be able to print this, but the design can easily be modified to a single-cup version by copying and editing the source file.
Also available as a public onshape document: https://cad.onshape.com/documents/7856a3317111245840630c48/w/d23db75c0ec357be2bfdf0d8/e/2b7df658e53bbceee926c2c2