Christmas tree by QuadroSky

Last crawled date: 3 years, 3 months ago

New Year is coming and it's time to decorate the tree)). I present to your attention a Christmas tree. I printed it from Petg using the following settings. The barrel is printed from brown in vase mode, 5 layers of lid and 5 layers of bottom, 0.4mm nozzle and 0.6mm layer width with 5% increase in flux. If you pause the printer on the 4th layer of the barrel and change the plastic to white, you get something like snow under the tree. Next, a branch is printed at a scale of 100%, with a layer of 0.2 mm and put on the trunk. Then each subsequent branch is printed with 5% scale down. Ie 95, 90, 85, 80 ... and so on up to 20%. To put on branches on the trunk, you need to alternate rotation around the axis by 30 degrees to alternate the ornament of the branches. You only need to scale along the x and y axis! The final touch will be a red star printed with a 0.1 mm layer and glued in two halves. Under a tree, you can additionally print figures of Santa Claus and Snow Maiden, boxes with gifts. I hope this will please you and create a festive mood.