Cellular Lamp Stand and Lens by SgtMunger

Last crawled date: 4 years, 2 months ago

Added a stand and diffuser lens designed to use this LED module https://www.amazon.com/gp/product/B00INIIJLI/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1 that comes with a remote and a bunch of nifty functions. The module will operate off 3 AAA batts but there is a hole in the stand to accept a common USB cable I cut the end off and soldered into the module and ditched the base weight\battery cover then cut a clearance hole for the wire. I used one of these cables https://www.amazon.com/gp/product/B01222EM7A/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1, cut the micro USB end off, then soldered the power wires directly into the modules pos/neg batt terminals. I printed the lens in clear PLA at 50% infill. Pic shows LED module seperate from the base (with silver weight disk) that gets tossed. Here is the amazing cellular lamp http://www.thingiverse.com/thing:19104/#remixes by nervoussystem. Big thanks for posting such a cool project for us!!!