CD and Album holder wall mount by Aeronautical 3d model
3dmdb logo
Thingiverse
CD and Album holder wall mount by Aeronautical

CD and Album holder wall mount by Aeronautical

by Thingiverse
Last crawled date: 3 years, 1 month ago
These are music albums and CD holders that you can mount on the wall. I designed them so that I can have my music on display. They are simple, small and only weight about 2.5g each with 25% infill and NO SUPPORT NEEDED! There is a small square on the back (20mm x 12mm), just large enough to add double sided tape or blue tak to adhere to the wall.
I made 3 different sizes for various ablums.
One for thin albums "Album Holder - Small": 4mm gap
One for medium albums "Album Holder - Medium": 8mm gap
One for large albums like the plastic cases "Album Holder - Large": 12mm gap
Also, there is one designed to hold a single cd, no case "CD Holder"
IMPORTANT NOTE: These brackets have been designed to sit slim on the wall, meaning the cd's and album sit almost flush. Just enough incline to stop them from topping over. Where l have them, this is no problem. But if you are planning on putting it somewhere in a high traffic area "like a windy area", than it may tip over. That being said, for 2.5g of filament, why not give it a go :).
I hope you like, l know l sure do.

Tags