CC2538 CC2592 development board case by p2baron

Last crawled date: 3 years ago

Case for a CC2538-CC2592 development board module.
These are Zigbee modules which I use to control my lights, thermostats and other stuff.
They offer great range and can be found on Aliexpress for 20-30 dollars.
I printed this without any supports. I got the logo in color by changing filament during the print. (google marlin m600 filament change).
Designed (included) is made in FreeCAD and is partly parameterized.
The font for the airvents is stolen from Andrew McCluskey (http://nalgames.com).
I printed it with a Ender 3 v2 (stock) with 20% infill and .2 layer height, no supports.
Requires four small screws for assembly.
** To get this board to work with Zigbee2MQTT **
Power on.
Download the flashing software: https://github.com/JelmerT/cc2538-bsl
Put board into BSL mode by holding SELECT, pressing RESET and the releasing SELECT.
Download the UART version of the firmware from here: https://github.com/jethome-ru/zigbee-firmware/tree/master/ti/coordinator/cc2538_cc2592
Flash the software
sudo ./cc2538-bsl.py -p /dev/ttyUSB0 -evw JH_2538_2592_ZNP_UART_20201010.bin