CB300F Fender Eliminitor by mattgia

Last crawled date: 3 years, 1 month ago

note: images are missing from the docs below. download the zip and view the REAMDE.md on your local machine for a better experience
Update after some use: plate light was held on with 3M double sided tape, but came loose. I re-taped it, and hopefully it holds this time, surface may have just been dirty, but screwing it down might be a better solution
Description
This package contains the models necessary to eliminate your fender on the 2015+ CB300F, and possibly CBR300. This modification is fully reversible if you follow the directions below. Holes should line up with US/Canada license plates.
Compatibility
Compatible Motorcycles:
2015+ CB300F
Probably compatible with:
2015+ CBR300
Probably not compatible with:
2017+ CB300R
Contents + Tips
This package includes the following

Lower license plate mount (bottom-plate-holder.stl)
print with the flat side down
this piece attaches the factory trim piece that runs under the tail, you will have to drill 2 small holes (they'll be hidden if you revert to stock)
you will likely need 4 extra nuts, bolts and washers for this piece (size M6 I believe)
there is a little nub at the bottom that allows you to attach your rear reflector if you want. (Legal requirement in some places)


Upper license plate mount (top-plate-holder.stl)
print them upside down
you need to flip the model to print the left side
I used some brackets from Ikea furniture to put under the print. Makes it stiffer. You can also increase the thickness of the print, especially if you don't plan on using the factory license plate light.


Brake light brackets (brake-light-support.stl)
print any way
holds up the front of the brake light

Plate light holder (plate-light-bracket.stl)
print with holes down
use 3M double sided tape, or self tapping screws to attach to the top of the "Upper license plate mount"

Directions
remove the pillion seat
remove pillion grab handles
remove tail light

remove 4 bolts holding factory fender on

attach factory turn signals to top brackets

attach top plate mounts

drill holes for bottom plate mount

attach bottom plate mount


attach license plate

loosely fit the tail light assembly to see how the plate light should fit. Mark it

remove the tail light assembly and secure the plate light

re-assemble everything
add the brake light brackets