Casted Silicone Rubber Dampeners - DIY KIT by ncrypta

Last crawled date: 3 years ago

Cast your own 7mm & 3mm Copter dampeners with this silicone casting forms!
They will fit to the frame of the MHQ2 Quadcopter for example.
First you need to make a silicone rubber slushie called "sugru" --> google it ;)
you need roughly 3/4 construction silicone and 1/4 corn starch or wheat floor.
Then spred it out into the forms and spread even with a spatula. Try to remove as many air as possible from the forms. Press together and put screws in the 4 centering holes...
...let dry for about 6 hours or more.
Remove and have fun!
!! On the 7mm you need 4x 3mm threaded rod inlays. you will put them in before you put the halves together !!
If there is enough interest i could do a video.