Car Wheel Spinner (for easy cleaning or mounting) by hendrik6073

Last crawled date: 3 years, 1 month ago

Inprired by a product i came across on the internet. I wanted to make a spinner for my wheels. When mounting the quit heavy rims it sometimes difficult to line up the bolts. This design helps me spinning the wheel in position. Maybe i do some modifications to roll and lift it in position. For now it works and i going to try it for a while.
https://youtu.be/NjfNqLJlcrI
It is based om 3030 alu profile. inside the PVC pipe are 3 rollers glued in. each roller has 2 bearings (ID 8mm , OD 22mm). PVC pipe is 32mm OD 26mm ID. Whole thing is adjustable so the length of the threaded 8mm rod and the 3030 profile depent on how big you want to go. there are m8 and m6 knobs. M8 are for the rods, m6 for rest of the pieces. Length does not matter much because extra length is covered bij the knobs. I printed the parts in PETG, with a infill of 80%. I printed with Simplify3d and that is why the parts are in pieces. The bushes around the bolts are printed in place at 100% infill.