caps for clarinet, saxophone and tenor saxophone

Last crawled date: 4 years, 4 months ago

Caps for Clarinet, Saxophone and Tenor Saxophone.
The Caps are designed to allow for customization and to fit a magnet to clamp the cap to your music stand.
The socket is designed to fit a magnet with a diameter of 10 mm.
I used these ones: https://www.maqna.de/en/neodym-magnete-discs/a-176/
(They provide a force of roughly 5 Newtons)
You may want to use stronger (thicker) magnets because they are just about holding to the stand. I guess 10 Newtons should be sufficient. This is also the reason why I included a 1mm and a 1.4mm wall thickness version. The 1mm version is lighter so you don't need to have a very strong magnet.
If you have stronger magnets (or don't need any) or want to customize your cap with writing or a logo as shown in the pictures I recommend using the 1.4mm version. Espacially when printing logos you otherwise get bits on the inside you have to remove and the print as a whole is worse with 1mm thickness.
Speeking of writing I used Microsoft Builder as it is in my opinion the easiest way to add writing or even logos etc.
0.5mm of "height" work fine for me.
Feel free to give feedback or ask questions.