caps and bling for 2 types of spoolholder by Coat

Last crawled date: 3 years ago

Some bling for two types of spoolholders for Tevo Tornado, CR10 and clones. I had to give up one of my end-caps* for a spoolholder, so i made some extra bling for compensation. It really looks nice and my printer works much better immediately :).
There are three versions, one of them has no logo, two of them with Tevo logo.
The two spoolholders:
Type A: https://www.thingiverse.com/thing:2833003
Type B: https://www.thingiverse.com/thing:2761246
The hexagonals at the back of the caps are cut-outs from the original stl-files of the spoolholders. I scaled them to 96% of the original size so it should fit. The size and orientation of the hexagonals are different for the two spoolholders, so pick the right cap.
Happy blinging.
Update:
Hastla remixed another type of spoolholder for this cap -> https://www.thingiverse.com/thing:2959578.
Printed my endversion with 0.1 resolution for best result, see first picture. The picture with the three types side by side are uncleaned drafts at 0.2.
Slice it with support.
*End-caps for the upperframe: https://www.thingiverse.com/thing:2868596