Camera housing for 36 mm mini FPV cameras. by tahustvedt

Last crawled date: 3 years, 1 month ago

My FPV camera is a 700TVL Sony chip with the lens threads built into the housing. The housing is made from steel and weighs a whopping 26 g. This printed housing weighs 6 g.
The threads are difficult to achieve. I printed at 80 micron and they didn't come out right, but the lens still screwed in with some extra effort.
Print in the orientation they open. 02 has PAL written on the bottom, and 03 has NTSC written on the bottom.
If you don't make them in black you probably need to coat the inside with paint or the picture is tinted by the plastic color. My picture became very blue before I coated the inside.