Cable trays

Last crawled date: 4 years, 2 months ago

Cable trays in different sizes to hide and route your cabling.

Different sizes are added. All with a length of 100mm. If you want another length, simply scale them in your slicer over the Y-axis. In the filenames W stands for Width, H for height (sorry being obvious). The given height is included the lid.


The higher the tray the looser the lid fits. So if you really need the space of a high one and the lid must be real tight, you probably better use two lower models.

The dwg/dxf of the cross-section of the base model (10x10) is added

Also a stp-file is added if you need a specific size. Remember the higher the looser the lid.
Make the straight vertical walls of the tray thicker to prevent this.


if you need longer ones then your printer can handle. first try to rotate the tray and lid with 45 degrees. If that doesn't help, print it in uneven parts and change the lids and trays to avoid getting the separation in the same place.

The flat and wide ones are ideal to protect your flatcables
Happy cable-managing :)
PS. TV doesn't seem to make STL-previews at the moment, hopefully this will change in the future.
Extra: I needed a long one and since my "big" printer has a 0.6 nozzle i adjusted the one i needed for that. It is added as Xtra_cabletray_W15xH10xL100_extrastrong (W and H not exact due to adjustments). As the name says, it is strong and probably stronger then needed.