Thingiverse
BumpVase1 by bbinnard
by Thingiverse
Last crawled date: 3 years ago
This is actually a modified version of https://www.thingiverse.com/thing:2637702, but instead of subtracting the bumps from the basic vase shape, I added them. I originally started out with hexagonal bumps, but these these just didn't look right, so I switched to circles. (Actually the bumps are modified hemispheres.) The basic shape of this vase is based on similarly shaped early Native American pottery. Those had no bumps of course, but were usually painted with fancy designs.
To save time you might like to know the bumps are arranged in 27 columns of 33 bumps each, for a total of 891 bumps. This part printed in just under 15 hours at a print speed of 80 mm/sec and a layer height of 0.200 mm.
To save time you might like to know the bumps are arranged in 27 columns of 33 bumps each, for a total of 891 bumps. This part printed in just under 15 hours at a print speed of 80 mm/sec and a layer height of 0.200 mm.
Similar models
cults
free
Bump Vase 1
...the basic shape of this vase is based on similary shaped early native american pottery. those had no bumps...
thingiverse
free
Standard Hex Shaped Bowl
...all thickness to 1.5 mm.
this item is printed in vase mode.
thicken the walls and bottom in vase mode to make a nice sturdy bowl.
thingiverse
free
Cross Shape Vase by johnkh
...cross shape vase by johnkh
thingiverse
cross shape vase
i havent printed this just yet
thingiverse
free
DiamondBowl3 by bbinnard
...onds on the outside.
print time was slightly less than 11 1/2 hours using a print speed of 80 mm/sec and a 0.200 mm layer height.
grabcad
free
Basic Shoe Shape
...pe
grabcad
this is just the shape of a basic shoe shape that can easily be modified and further detailed by anyone who pleases.
thingiverse
free
Texas Vase by DC03
...texas vase by dc03
thingiverse
this is a texas shaped pen holder i made. just print it in vase mode and stick some pens in.
cg_trader
$3
Vase home Faceted | 3D
...can probably make some very interesting shapes with these files by using a different scale factors in the z, x, and y directions.
thingiverse
free
Spiral vase by Vyken
...result is quite satisfying.
i can modify the size or the shape if you want, just ask me.
i will perhaps do a double spiral vase.
thingiverse
free
Simple Vase for Vase Mode
...approximately 80% scale for 100 mm height.
printed in vase mode.
more of my models on cults:https://cults3d.com/en/users/abbymath
thingiverse
free
Large Vase by bbinnard
...large vase by bbinnard
thingiverse
double-wall vase or planter printed i just under 24 hours with 0.200 mm layer height.
Bbinnard
thingiverse
free
BasketWeave1 by bbinnard
...e1 by bbinnard
thingiverse
extensive info about this part is here: http://birkbinnard.com/blog/from-architecture-to-3d-printing/
thingiverse
free
Wiggle2 by bbinnard
...wiggle2 by bbinnard
thingiverse
large vase approx. 220 mm tall. 12 hours print time with 0.200 mm layer height.
thingiverse
free
Collander by bbinnard
...
thingiverse
this could be a small colander or fruit basket. using a layer height of 0.200 mm it printed in 16 hours 45 minutes.
thingiverse
free
VoronoiBowl4 by bbinnard
...y bbinnard
thingiverse
a smaller, solid-walled version of previous open voronoi parts. print time 17:30 @ 0.200 mm layer height.
thingiverse
free
PipeVase3 by bbinnard
...first of 2 parts with the same shape. next one will have just the ribs. this print took 22 hours with a layer height of 0.200 mm.
thingiverse
free
VoronoiBowl1 by bbinnard
...hingiverse
this medium sized bow printed in about 23 1/2 hours using a layer height of 0.200 mm and a print speed of 100 mm/sec.
thingiverse
free
Wigglevase8 by bbinnard
... this vase is fairly large; the print shown here is scaled down to 65% and took 14.5 hours to print with a 0.200 mm layer height.
thingiverse
free
Planter3 & Tray3 by bbinnard
...amp; tray3 by bbinnard
thingiverse
oval-shaped planter and tray for small plants that may be too large for planter1 or planter2.
thingiverse
free
Round box with top by bbinnard
...round box with top by bbinnard
thingiverse
this round box has a tight fitting lid.
thingiverse
free
WBVase2 by bbinnard
...e same basic geometry but has a different overall shape. it printed in a little less than 20 hours using a 0.200 mm layer height.