Bulkhead connectors

...mcil cap by thegwa thingiverse cap for mcil bulkhead connector

...khead cables would work. the sma is the standard opening. i also attached the design for the occlusion to make your own sma hole.

...or - htg connector by nickbucher thingiverse this is an adaptor for the htg connector used to pass wires through the dct gearbox

...commodate these connectors: https://www.amazon.com/gp/product/b07p84vltr also removed a lot of the extra plastic in the bulkhead.

...rglue or cyano to glue the bulkhead connector into the mount, and to glue the mount cap on. once set it forms a very rigid mount.

...elp tighten the clamp nut. the housing is assembled with stainless hardware: m4 nuts and m4x14 stainless socket head cap screws.

...e this tool is useful for connecting/unconnecting sma cables from bulkhead connectors. especially for those with chubby fingers!

...t and rubber washer from an off-the-shelf pg16 gland nut, if you have any extra. installation video: https://youtu.be/ju1locfurhc

...eter thread 6.4mm nut height 15.8mm nut outer diameter print high infill, no supports required 0.1 layer height, but works on 0.2

... applied around the perimeter of the bulkhead feedthrough and around the body of the connector to make a water-resistant fitting.

...bulkhead bolted door thingiverse bulkhead

...bulkhead tool by babyjesus292 thingiverse tool for bulkhead mounting

...traxxas bulkhead by rayman9076 thingiverse traxxas bulkhead part 2530

...gothic bulkhead by servoskull343 thingiverse gothic bulkhead for wargaming scenery

...head nut tools by dth5767 thingiverse tools for tightening nuts on bulkheads. these are for 3/4" and 1" abs bulkheads

...mtc2 bulkhead tie by bobw99 thingiverse stiffener to connect mtc2 bulkheads.

...necromunda style bulkhead template by xceptionzero thingiverse accurate bulkhead template for making your own bulkheads have fun

...irtight seal. picture shows the bulkhead with a 5/8" drilled fermonster lid. still need to add the fermentation lock hole.

... can easy print more with copy paste on slicer. printed on my prusa mk2.5s & elegoo mars resin printer, both came out great.

...connector by nagato thingiverse connector

...connectors thingiverse m

...connector by graham2020 thingiverse connector for 6mm dowel

...connector cap thingiverse this is a cap for the connector of the optimate charger

...x-connector, cross connector thingiverse kreuzverbinder zur verbindung von drei 6 mm dicken brettchen

...t-connector, butt connector thingiverse mit den stossverbinder kann man zwei 6 mm brettchen miteinander verbinden

...connector by userwl thingiverse connector with 0.154in radius and 0.125in radius ends.

...erse made my own connectors for the great loop! like the idea to use the standard connector, should be more "flexible"

...turret connector by nicklasgaardh thingiverse connector for turrent