Brio compatible diesel engine by greyhawk01

Last crawled date: 3 years, 1 month ago

A brio compatible diesel engine
UPDATE 02/09/17
corrected position of holes in diesel_base (use v2)
increased diameter of pilot hole for furniture stud in brio_base_3ax (use v2)
Print the following:
1x diesel base
1x diesel body
6x wheels (supports needed)
1x diesel face
1x brio base 3ax
I used the following to make the magnetic connectors:
2x 12x3mm ring ferrite magnets with 3mm hole
2x Silver upholstery nails 11mm diameter
For the wheel axles I used:
3x 30x2mm metal rods
General notes
The face is rubbish; hopefully someone will remix a better one!
I used superglue on all joints and to stick the face on
I used acrylic to add detail to the face
I used a hammer to get the upholstery pins in