Bottle & Can holder for table mounting, detachable by rebellAubell

Last crawled date: 2 years, 10 months ago

All parts printed on a Flashforge Adventurer3, sliced in FlashPrint, 15% hexagonal infill, hyper quality.
The 'lid' can either be put on top- creating a hidden room beneath, or be situated at the bottom - to make room for beer/aluminum cans.
Assembly instructions:
(See part-names)
I used three small M3 wood screws (head: 5mm in diameter, 10mm long) and glue to bond ''Anchor'' with ''supporter'', then glue to bond ''Hook 1 and 2'' to the bottom of the ''Cavity'', and glue to bond ''supporter'' and ''cavity''. The ''plate ring'' and ''plate'' are also glued, with the small notches being aligned.
Lastly, three M3/M4 wood screws (head-diameter should be below 10mm, and not higher than 3mm) are utilized to mount the ''Table mounting'' to the table. The holes in the ''Table mounting'' should be bored as to fit the screws utilized.
:)