Bottle cage for camper by Zefram_Cochrane

Last crawled date: 3 years, 1 month ago

Bottle cage for camper
Introduction
Simple, flexible but very stable holder for large 1.5 l bottles and Nalgene wide mouth bottles.
The holder is deliberately designed in two parts to be able to freely choose the height so that top-heavy bottles do not fall out.
The upper part of the holder is built particularly stable to prevent even on very bumpy gravel roads a slip out of the bottle or a breakage of the holder.
Printing
I recommend more heat resistant filament such as PETG, ASA or ABS as PLA will not hold its shape during the summer months in the car.
A layer height of 0.2 mm with a filling of 20% show good and stable results. Both parts can be printed without support.
Assembly
The lower part can be screwed directly into the base plate via four 3 mm screws and the upper part with two 5 or 6 mm screws.
Updates
2021-04-10
I modified the lower part so that it can now be attached to the wall.
Also check out my other camper parts designs at thingiverse:

Paper towel holder with threaded rod for more stabiltyFoldable towel holderTarp holder for rain gutter of a carTool for opening car wet batteriesUnder shelf folding mirrorSmall under cabinet reading lamp for camperMagnetic sponge tray for sinkBracket for small fire extinguisher in camper vanBottle cage for camper

I would be very happy about a Tip.

Ceterum censeo martem esse abeundum.