Bondtech Mk3S E3D V6 Fan Shroud Remix

Last crawled date: 4 years, 2 months ago

A small Remix of the original Fan Shroud from Bondtech for the Prusa Mk3S Extruder with the E3D V6 Hotend.
I made this for better printability with FDM Printers. Bridges prints better than 90 Degree Curves in the Air.
As you can see on the original Shroud in the first Picture it is inside a 90 Degree Curve in the Air. This print not well with a FDM Printer. Also if you print this with Support you will break the Shroud when you remove the Support with Pliers.
So as you can see on the second an third Picture i added a small Step inside so it prints two small Bridges. This Version prints with no Support pretty fine with 0,20mm Layer Height on an FDM Printer.
Bondtech allowed me to share this Model here on Thingiverse. Thank you Bondtech!