Thingiverse
BMG V6 Direct Drive mount for HeroMe Gen 5 (Stock Creality Gantry) by edddeduck
by Thingiverse
Last crawled date: 3 years, 1 month ago
The pre-existing Direct Drive solution for the HeroMe Gen 5 using a BMG extruder and V6 hot-end didn't take advantage of the built in V6 mount inside the BMG extruder. This meant the extruder was 40mm higher than required and used additional mounts, this added weight, extra Bowden tubes and moved the centre of gravity upwards. The solution also required you to use a new direct drive gantry.
This solution has the following improvements:
Uses the built in V6 mount for the BMG meaning the highest quality direct drive possible.
Lowers the extruder by 40mm making the centre of gravity improved.
The 3D printed mount plate supports using the stock or direct drive back plates. The Direct Drive backplate allows you to mount the extruder through the backplate as well for added stiffness. (optional)
Hot-end cooling duct also diverts some flow upward to cool the pancake stepper. They usually run a little hot with this small amount of extra airflow they remain only slightly warm even when using high speed printing with linear advance enabled.
Retains stock mounting position for a BL Touch and fan mounts. I recommend the light weight 5015 fans but you can pick your own they all should work.
This solution has the following improvements:
Uses the built in V6 mount for the BMG meaning the highest quality direct drive possible.
Lowers the extruder by 40mm making the centre of gravity improved.
The 3D printed mount plate supports using the stock or direct drive back plates. The Direct Drive backplate allows you to mount the extruder through the backplate as well for added stiffness. (optional)
Hot-end cooling duct also diverts some flow upward to cool the pancake stepper. They usually run a little hot with this small amount of extra airflow they remain only slightly warm even when using high speed printing with linear advance enabled.
Retains stock mounting position for a BL Touch and fan mounts. I recommend the light weight 5015 fans but you can pick your own they all should work.
Similar models
thingiverse
free
DPX Direct drive extruder and stepper mount (Hieha and Dmscreate)
...uder or another direct drive extruder.
fan ring: www.thingiverse.com/thing:3899915
v6 fan mount:www.thingiverse.com/thing:3899900
thingiverse
free
Tevo Nereus Direct Drive, BLTouch, BMG, and V6 by turkal65
... for the tevo nereus
bmg extruder
e3d v6
bltouch 3.1
stock 30mm fan
you can use the stock or customized 30 mm v6 duct
5010 blower
thingiverse
free
Support to use a BMG clone as direct drive in a Ender 3 V2 with stock hotend by dossajo
...to mount a bmg clone extruder in an ender 3 v2 using the stock hotend. this support uses the fan case screw to improve rigidity.
thingiverse
free
MK to BMG Adapater
...3 hot end directly into a bondtech or clone extruder with mount for fan. with option of using 5015 blower fan for hotend cooling.
thingiverse
free
BondTech BMG E3d v6 Extruder Assembly
...pter allows you to connect a 40mm fan to the stock fan connector that comes with the e3d allowing for the ultra quiet noctua fans
thingiverse
free
Direct Drive extruder mount for Ender 5 plus with chain (HeroMe Gen5 remix) by Iveusse
... link from gnizten (https://www.thingiverse.com/thing:4116655)
this version has a 9mm y offset to be compatible with herome gen 5
thingiverse
free
Ender 3 Direct Drive Mini BMG Extruder mounting plate for E3D V6(V5) with adjustable BL-Touch mount by ru_ace
...www.thingiverse.com/thing:4620308
adjustable bl-touch mount compatible with mounts from https://www.thingiverse.com/thing:3148733
thingiverse
free
Ender 3 Direct Drive Mini BMG Extruder mounting plate for stock hotend cover with adjustable BL-Touch mount by ru_ace
...www.thingiverse.com/thing:4613803
adjustable bl-touch mount compatible with mounts from https://www.thingiverse.com/thing:3148733
thingiverse
free
BMG Extruder Mount for Tall Plate by Jigsawgirl
...awgirl
thingiverse
direct drive mounting plate for ender 3 to mount a bmg extruder on the taller plate available on aliexpress.
thingiverse
free
BMG Bondtech e3D v6 Hevo Hypercube Hotend Mount Extruder direct drive
...se
i remixed the hotend mount to have a bmg as a direct drive and the extruder screw isnt crashing the extrusion on the front ;)
Herome
thingiverse
free
HeroMe Ender3 Sherpa Mini Mount by theFPVgeek
...herome ender3 sherpa mini mount by thefpvgeek
thingiverse
herome ender3 sherpa mini mount - untested
thingiverse
free
A10v4 HeroMe Gen5 Gantry Adapter by nico85ar
...adapter by nico85ar
thingiverse
this is my design to adapt the gantry of a geeetech a10v4 to a herome gen5 e3d v6 customization.
thingiverse
free
Pen holder HeroMe Gen 5 by Pakoach
...remix to do 2d printing with your printer.
i adapted the pen holder to fit the herome gen 5.
it will need the abl mount to put it
thingiverse
free
HeroMe Gen5 SpeedDrive Lite by tomohulk
...e other versions out there, and works amazing. this is only tested with the stock extruder and stepper and with the herome gen5.
thingiverse
free
HeroMe Gen5 Base for MicroSwiss Direct Drive + Linear Rails by absorbthefuture
...ls by absorbthefuture
thingiverse
i remixed the herome base to work for my setup with micro swiss direct drive and linear rails.
thingiverse
free
V6 HeroMe Bowden Mashup by Hometinker12
... the carriage on the rail first
install the herome base and hotend
connect and tension belts
install the x-endstop/wiremanagement
thingiverse
free
HeroMe V5 tinkercad remix for BondTech DDX by sebbzor
...ersion of ddx (v3) that was released march 2021 by bondtech.
this piece was designed around bondtech ddx v2 for creality ender.
thingiverse
free
HeroMe Gen5 Ender3v2 Mount by mikeybme
...m y-offset made no sense to me, so i ditched it and merged the gantry adapter with the base (less screws and nuts to fight with).
thingiverse
free
Linear Rail Direct Drive BMG HeroMe Gen5 Ender 5 adapter by alucard321pl
... together so that the https://www.thingiverse.com/thing:3782865 modification would fit my herome gen 5 with bmg and direct drive.
thingiverse
free
V6 HeroMe Direct Drive Mashup by Hometinker12
... first
install the herome base and hotend
connect and tension belts
install extruder/stepper
install the x-endstop/wiremanagement
Bmg
turbosquid
$3
.50 BMG
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
.50 BMG
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$25
50 BMG Cartridge
...e 3d model 50 bmg cartridge for download as 3ds, max, and obj on turbosquid: 3d models for games, architecture, videos. (1303035)
turbosquid
$30
Sniper 50 bmg
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Cal 50 BMG
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
cg_studio
$25
.50 BMG Cartridge3d model
...odel
cgstudio
.3ds .max .obj .wrl - .50 bmg cartridge 3d model, royalty free license available, instant download after purchase.
3d_export
$5
50 caliber BMG round 3D Model
...d 3d model
3dexport
50cal caliber 50 round bullet bmg cartridge browning rifle
50 caliber bmg round 3d model csw92 27660 3dexport
3d_export
$22
.50 BMG Cartridge 3D Model
...ectile rifle round pistol cartridge m2 hb 127x99mm nato browning barrett m82a1
.50 bmg cartridge 3d model plutonius 8091 3dexport
turbosquid
free
LAR Grizzly .50 BMG Sniper
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$8
cartrige m50 bmg
...aterials are logically named<br>the main format is in 3ds max 2009.<br>satisfcation garranteed..<br>thank you !
Gantry
turbosquid
$349
Gantry crane
...alty free 3d model gantry crane for download as ige and sldas on turbosquid: 3d models for games, architecture, videos. (1476278)
3d_export
free
firestone advertising gantry
...rs premises and<br>these advertisement gantries, were very popular in the 30-70's at grand prix races advertising tyres
turbosquid
$30
Derelict Launch Gantry
...alty free 3d model derelict launch gantry for download as fbx on turbosquid: 3d models for games, architecture, videos. (1669952)
turbosquid
$129
Gantry Crane RTG
...e 3d model gantry crane rtg for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1491933)
turbosquid
$120
Gantry stacker Assembly
...try stacker assembly for download as sldas, fbx, 3ds, and ige on turbosquid: 3d models for games, architecture, videos. (1648516)
turbosquid
$19
Train Signals Gantry
...l train signals gantry for download as 3ds, max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1462242)
turbosquid
$5
STS Gantry Crane
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$160
Bulk carrier with gantry crane
...carrier with gantry crane for download as lwo, obj, and blend on turbosquid: 3d models for games, architecture, videos. (1285258)
3d_export
$50
RMG Gantry Crane 3D Model
...t hoist rail rubber tyre tire rtg eot beam portal heigh tonne shipyard port
rmg gantry crane 3d model 5starsmodels 42860 3dexport
3d_export
$29
gantry crane
...istic model that will enhance the detail and realism of any of your rendering projects.<br>file formats: max, obj, fbx, 3ds
Creality
turbosquid
$7
filament roller single print creality
...del filament roller single print creality for download as stl on turbosquid: 3d models for games, architecture, videos. (1619309)
3d_export
free
Creality ender enclosure webcam mount
...e creality enclosure. sure is better than a tripod. change it up if it helps. i printed pla with 50% infill on my dd ender 3 pro.
3d_export
free
ender 3 frame cavity covers
...3 inserts,<br>made these inserts for the framework of the creality ender 3 - makes it look a bit more...
3d_export
$42
excavator
...width is the original size. 0.12 mm printing surface creality ender-5...
3d_export
free
ender 3 3d print bed clips
...glass bed + normal aluminium bed frame of the creality ender 3 = 6mm (b) these clips are designed...
3d_export
free
ender 3 enclosure corners
...that i could build my enclosure frame for my creality ender 3 - so i printed them in a...
thingiverse
free
Toolbox Creality
...ingiverse
this is a toolbox for tools that comes with creality printers, with a guide to cut capricorn ptfe with a cutter blade.
thingiverse
free
Creality Hotend Plate
... from creality themselves as the ender 3 is open source. this means i did not create this design and all credit goes to creality.
thingiverse
free
Creality Cat by alexander125
...creality cat by alexander125
thingiverse
this is the cat that comes on the sd card for all creality 3d printers.
thingiverse
free
Creality Dog by alexander125
...creality dog by alexander125
thingiverse
this is the dog that comes on the sd card for all creality 3d printers.
Gen
turbosquid
$15
gen
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
Gen. Rifle
...bosquid
royalty free 3d model gen. rifle for download as fbx on turbosquid: 3d models for games, architecture, videos. (1374075)
3d_export
$8
pokemon sprite voxel 1 gen
...pokemon sprite voxel 1 gen
3dexport
pokemon voxel 1 gen
turbosquid
$45
Chest Next-Gen
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$39
Nano 6th Gen
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$8
pokemon sprite voxel 7 gen
...pokemon sprite voxel 7 gen
3dexport
pokemon sprite voxel 7 gen
3d_export
$8
pokemon sprite voxel 5 gen
...pokemon sprite voxel 5 gen
3dexport
pokemon sprite voxel 5 gen
3d_export
$8
pokemon sprite voxel 3 gen
...pokemon sprite voxel 3 gen
3dexport
pokemon sprite voxel 3 gen
3d_export
$8
pokemon sprite voxel 4 gen
...pokemon sprite voxel 4 gen
3dexport
4 gen pokemon voxel sprites
3d_export
$8
pokemon sprite voxel 2 gen
...pokemon sprite voxel 2 gen
3dexport
pokemon sprite voxel 2 gen
V6
3d_export
$100
v6 engine
...engine
3dexport
complete v6 engine modeled on solidworks 2017 along with .stl, .sldprt and .sldasm of all th parts and assembly.
3d_export
$10
V6 engine
... the first v6 engines were designed and produced independently by marmon motor car company, deutz gasmotoren fabrik and delahaye.
3d_export
$35
v6 engine
...s a complete model of a v6 engine containing over 400 components. you can contact me for a video of all the components assembling
3d_export
$10
v6 engine
...v6 engine
3dexport
turbosquid
$25
Bed1001-v6
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$22
Chair2-v6
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
V6.mb
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$20
V6 engine
...rovided in this package is all the parts in sldprt format and assembly in sldasm format. i can also convert the format on demand.
3ddd
$1
Стол V6
...6" в стиле дизельпанк изготовлен из блока двигателя, 4х поршней и 4х шатунов.
столешница изготовлена из стекла толщиной 8мм.
cg_studio
$199
V6 VVTi3d model
...v6 vvti3d model
cgstudio
.3ds - v6 vvti 3d model, royalty free license available, instant download after purchase.
Stock
turbosquid
$19
Stocks
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$7
Christmas Stockings
...christmas stockings
3docean
christmas gift holiday present sock stocking
sock and 2 gift.
turbosquid
$30
Christmas Stocking
...
royalty free 3d model christmas stocking for download as fbx on turbosquid: 3d models for games, architecture, videos. (1660476)
turbosquid
$2
sexy stockings
...uid
royalty free 3d model sexy stockings for download as max on turbosquid: 3d models for games, architecture, videos. (1350546)
turbosquid
$2
sexy stockings
...uid
royalty free 3d model sexy stockings for download as max on turbosquid: 3d models for games, architecture, videos. (1354968)
turbosquid
$2
sexy stockings
...uid
royalty free 3d model sexy stockings for download as max on turbosquid: 3d models for games, architecture, videos. (1351029)
turbosquid
$3
Iron Stocks
...yalty free 3d model iron stocks for download as blend and obj on turbosquid: 3d models for games, architecture, videos. (1596546)
turbosquid
$6
Prison Stocks
...free 3d model prison stocks for download as obj, c4d, and fbx on turbosquid: 3d models for games, architecture, videos. (1454023)
turbosquid
$29
Christmas Stocking
...del christmas stocking for download as 3ds, obj, c4d, and fbx on turbosquid: 3d models for games, architecture, videos. (1344671)
turbosquid
$5
Medieval Stocks
... model medieval stocks for download as 3ds, obj, c4d, and fbx on turbosquid: 3d models for games, architecture, videos. (1291222)
Direct
design_connected
free
Compas Direction
...compas direction
designconnected
free 3d model of compas direction by vitra designed by prouvé, jean.
design_connected
$18
Direction Pivotant
...direction pivotant
designconnected
vitra direction pivotant computer generated 3d model. designed by prouvé, jean.
turbosquid
$6
not direct the front
...oyalty free 3d model not direct the front for download as max on turbosquid: 3d models for games, architecture, videos. (1213034)
turbosquid
$10
Rails Direct
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
Picto toilet directions
...lude 3d files next to rhino6: x3dv, step, igus, obj and stl. double-sided, flipping changes the gender directions to the toilets.
3ddd
$1
fauteuli direction
...d
chair , vitra , fauteuli
fauteuli vitra chair
design_connected
$18
Fauteuil Direction, 1951
...fauteuil direction, 1951
designconnected
vitra fauteuil direction, 1951 computer generated 3d model. designed by prouvé, jean.
3d_export
$5
Directional tactile 3D Model
...tactile 3d model
3dexport
directional tactile braille tile flooring interior
directional tactile 3d model renob000 71068 3dexport
turbosquid
$26
Radio direction finder A
...ty free 3d model radio direction finder a for download as fbx on turbosquid: 3d models for games, architecture, videos. (1212490)
turbosquid
$7
Wooden direction signage
...ty free 3d model wooden direction signage for download as max on turbosquid: 3d models for games, architecture, videos. (1453747)
Drive
turbosquid
$90
Drive
...turbosquid
royalty free 3d model drive for download as blend on turbosquid: 3d models for games, architecture, videos. (1654393)
3d_export
$10
cycloidal drive
...cycloidal drive
3dexport
cycloidal drive
3d_ocean
$5
Flash Drive
...h drive included : – materials – scene ( lighs / room ) – .c4d + .obj for any questions please feel free to contact me thank you.
3d_ocean
$5
Usb drive
...s shaders and a lighting setup. it also has a small animation of it going in and out. i saved it out as both a .blend file and...
3d_ocean
$5
Pen Drive
...est computer drive game model good low poly new pen pen drive textured unwrapped uv very low poly
a very beautiful low poly model
3d_ocean
$10
External hard drive
... is a detailed model of a trekstor external hard drive. you can easily modify the label on the top. simply edit the text objects.
turbosquid
$60
Star Drive
...squid
royalty free 3d model star drive for download as blend on turbosquid: 3d models for games, architecture, videos. (1254314)
turbosquid
$50
Star Drive
...squid
royalty free 3d model star drive for download as blend on turbosquid: 3d models for games, architecture, videos. (1263524)
turbosquid
$45
Star Drive
...squid
royalty free 3d model star drive for download as blend on turbosquid: 3d models for games, architecture, videos. (1287060)
turbosquid
$40
Star Drive
...squid
royalty free 3d model star drive for download as blend on turbosquid: 3d models for games, architecture, videos. (1261902)
Mount
3d_export
free
mounting bracket
...mounting plate is the portion of a hinge that attaches to the wood. mounting plates can be used indoors, cabinetry and furniture.
turbosquid
$2
MOUNTING
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mounts
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mount Fuji
...fuji
turbosquid
free 3d model mount fuji for download as obj on turbosquid: 3d models for games, architecture, videos. (1579977)
3d_export
$5
Headphone mount LR
...headphone mount lr
3dexport
headphone mount l+r
turbosquid
$39
Mount rainier
...quid
royalty free 3d model mount rainier for download as fbx on turbosquid: 3d models for games, architecture, videos. (1492586)
turbosquid
$5
pipe mounting
...quid
royalty free 3d model pipe mounting for download as obj on turbosquid: 3d models for games, architecture, videos. (1293744)
turbosquid
$3
Mounting Tires
...uid
royalty free 3d model mounting tires for download as fbx on turbosquid: 3d models for games, architecture, videos. (1708511)
3d_export
$5
Magnetic GoPro Mount
...pro mount
3dexport
cool magnetic mount for gopro. allows you to mount the camera on flat metal surfaces and get exclusive shots.
turbosquid
$5
Stone Mount
...ty free 3d model stone mount for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1370306)
5
turbosquid
$6
Rock 5-5
...urbosquid
royalty free 3d model rock 5-5 for download as obj on turbosquid: 3d models for games, architecture, videos. (1639063)
3d_export
$5
hinge 5
...hinge 5
3dexport
hinge 5
turbosquid
$10
A-5
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
A-5
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$12
Calligraphic Digit 5 Number 5
...hic digit 5 number 5 for download as max, obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1389333)
3ddd
$1
5 роз
...5 роз
3ddd
5 роз в стеклянной вазе
design_connected
$11
iPhone 5
...iphone 5
designconnected
apple iphone 5 computer generated 3d model.
3ddd
$1
Lola 5
...lola 5
3ddd
miniforms
lola 5 miniforms 300*65*134
3ddd
$1
Nexus 5
...dd
nexus , phone , телефон
google nexus 5 phone
3d_ocean
$15
iPhone 5
...iphone 5
3docean
3d 4d apple cinema iphone model modeling phone screen texture
iphone 5 3d model and texture realistic iphone 5.