Thingiverse
Bluetooth Stereo Amplifier 2x50W TPA3116D2 by guppyk
by Thingiverse
Last crawled date: 3 years, 4 months ago
Bluetooth Amplifier Enclosure
So here is the enclosure for what is currently my favorite 2x50W TPA3116D2 Bluetooth amplifier board. I wanted it to be upright so it takes up less space (and looks a little different from all those commercial designs out there). Originally designed to complement my printed back horn speakers it finally ended up connected to my JVC Zero 6 speakers and replacing my Marantz receiver (which, however, badly needs new caps and volume controls, anyway - yes, I know, that hurts...). So ended up with two of these little boards (and have already ordered the 2.1 amp from the same brand).
First of all, here is what you will need for this project:
The actual amplifier board: ZK-502T Bluetooth 5.0 2x50W Amplifier Board. The reason I chose this one is that this board has bass and treble controls, aux in, BT 5, virtually no noise, sounds great and even comes with a very basic top/bottom plate (which I am not using), connector, and shiny knobs (also not used in this project, but you can).
Plus a 12-24V switching power supply. The TPA3116 operates on a wide range of voltage. However, I would definitely recommend a 24V/3A+ (72W) power supply to get the full output (but have also tried with a 12V supply and it sounds surprisingly good, if you have one lying around).
Some background. TPA3116D2 is a Texas Instruments chip that has been around for a number of years and has turned into one of the most popular chips in compact amplifier boards. It is extremely power efficient and hence only requires small heatsinks (if any). These boards are also very popular among manufacturers of budget amps (the majority of those 50-100$ amps on the market are TPA3116 and some of these are really good). However, I currently own 6 different boards based on this chip and it seems sound quality (and particularly noise) very much depend on board design. This board is definitely my favorite, good sound, no noise... (just got the 2.1 board from the same manufacturer but didn’t get to try it yet - more in the future).
Even a little more more background (for those interested). TPA3116D is a Class-D amplifier. They are particularly energy efficient, cheap and can produce excellent sound quality (although sometimes characterized as somewhat more sterile than Class AB amps). Frequently (falsely) translated as “digital” amplifier, a Class-D amp is actually a switching amp, i.e. an electronic amplifier in which the amplifying devices operate as electronic switches. The principle is actually pretty simple. A comparator compares a high frequency triangular wave with an analog audio input. This generates a PWM (i.e. a series of pulses of which the duty cycle is directly proportional to the input audio signal). The comparator then drives a MOS gate driver which in turn drives a pair of high-power switches and produces an amplified vesion of the original PWM signal. A simple low pass filter removes the high-frequency switching components of the PWM signal and produces an amplified version of the original input signal, which can be fed into an ordinary speaker.
Printing and assemblage. Printing should be very straightforward. No supports or bed adhesion needed. I print everything in 0.2-0.28 mm resolution and with 30% infill (lines).
Filament. I use Sunlu Carbon Fiber PLA for the main body and stand (not so much because it needs the additional strength, mainly because it looks really good), the knobs in Silk Silver PLA (or gold/bronze, if you like them a little flashier), and the side panels in standard warm white PLA.
Print one each of 1.) the main body 2.) the stand 3.) each of the panels 4.) the larger volume control knob and finally 5.) two of the smaller bass/treble control knobs (you could of course use the shiny knobs that come with the amp instead). Slide the board into the enclosure and fix with the 3 nuts of the volume controls. You can use the two small screws (they come with the board) to further secure the board (I have added screw holes to the enclosure) - but it works well without. Glue the bottom/right panel to the main body (I have added holes on the body and pegs on the panel, so it is really easy to mount, even without glue). Connect the speakers and to the terminals and the 12-24V power to the corresponding connector, mount (no need for glue, you want this to be removable) the top/left side panel and you are ready to go.
HOPE YOU LIKE IT AND IF YOU LIKE IT PLEASE LIKE IT!
Enjoy.
So here is the enclosure for what is currently my favorite 2x50W TPA3116D2 Bluetooth amplifier board. I wanted it to be upright so it takes up less space (and looks a little different from all those commercial designs out there). Originally designed to complement my printed back horn speakers it finally ended up connected to my JVC Zero 6 speakers and replacing my Marantz receiver (which, however, badly needs new caps and volume controls, anyway - yes, I know, that hurts...). So ended up with two of these little boards (and have already ordered the 2.1 amp from the same brand).
First of all, here is what you will need for this project:
The actual amplifier board: ZK-502T Bluetooth 5.0 2x50W Amplifier Board. The reason I chose this one is that this board has bass and treble controls, aux in, BT 5, virtually no noise, sounds great and even comes with a very basic top/bottom plate (which I am not using), connector, and shiny knobs (also not used in this project, but you can).
Plus a 12-24V switching power supply. The TPA3116 operates on a wide range of voltage. However, I would definitely recommend a 24V/3A+ (72W) power supply to get the full output (but have also tried with a 12V supply and it sounds surprisingly good, if you have one lying around).
Some background. TPA3116D2 is a Texas Instruments chip that has been around for a number of years and has turned into one of the most popular chips in compact amplifier boards. It is extremely power efficient and hence only requires small heatsinks (if any). These boards are also very popular among manufacturers of budget amps (the majority of those 50-100$ amps on the market are TPA3116 and some of these are really good). However, I currently own 6 different boards based on this chip and it seems sound quality (and particularly noise) very much depend on board design. This board is definitely my favorite, good sound, no noise... (just got the 2.1 board from the same manufacturer but didn’t get to try it yet - more in the future).
Even a little more more background (for those interested). TPA3116D is a Class-D amplifier. They are particularly energy efficient, cheap and can produce excellent sound quality (although sometimes characterized as somewhat more sterile than Class AB amps). Frequently (falsely) translated as “digital” amplifier, a Class-D amp is actually a switching amp, i.e. an electronic amplifier in which the amplifying devices operate as electronic switches. The principle is actually pretty simple. A comparator compares a high frequency triangular wave with an analog audio input. This generates a PWM (i.e. a series of pulses of which the duty cycle is directly proportional to the input audio signal). The comparator then drives a MOS gate driver which in turn drives a pair of high-power switches and produces an amplified vesion of the original PWM signal. A simple low pass filter removes the high-frequency switching components of the PWM signal and produces an amplified version of the original input signal, which can be fed into an ordinary speaker.
Printing and assemblage. Printing should be very straightforward. No supports or bed adhesion needed. I print everything in 0.2-0.28 mm resolution and with 30% infill (lines).
Filament. I use Sunlu Carbon Fiber PLA for the main body and stand (not so much because it needs the additional strength, mainly because it looks really good), the knobs in Silk Silver PLA (or gold/bronze, if you like them a little flashier), and the side panels in standard warm white PLA.
Print one each of 1.) the main body 2.) the stand 3.) each of the panels 4.) the larger volume control knob and finally 5.) two of the smaller bass/treble control knobs (you could of course use the shiny knobs that come with the amp instead). Slide the board into the enclosure and fix with the 3 nuts of the volume controls. You can use the two small screws (they come with the board) to further secure the board (I have added screw holes to the enclosure) - but it works well without. Glue the bottom/right panel to the main body (I have added holes on the body and pegs on the panel, so it is really easy to mount, even without glue). Connect the speakers and to the terminals and the 12-24V power to the corresponding connector, mount (no need for glue, you want this to be removable) the top/left side panel and you are ready to go.
HOPE YOU LIKE IT AND IF YOU LIKE IT PLEASE LIKE IT!
Enjoy.
Similar models
thingiverse
free
Audio power amplifier 2x50W (Tpa3116d2) by kamilice
...sure for my audio power amplifier based around the tpa3116d2.you can find pcb details and download here:http://www.maj.pavlin.si/
thingiverse
free
XH-M422 TPA3116D2a amplifier case by jasobrino66
...32817439132.html?spm=a219c.10010108.1000016.1.697d6264vdsg50&isorigtitle=true
power supply between 12 and 24v
power connector
thingiverse
free
Audio Amplifier Case for Drok TPA3116 by Emotiva
...re 5mm tall + board thickness).
speaker designs:https://www.thingiverse.com/thing:2604635 < contains links to several others.
thingiverse
free
XH-M543 amplifier enclosure
...ure
thingiverse
enclosure for xh-m543 high power digital amplifier board tpa3116d2 audio amplifier module double channels 2*120w
thingiverse
free
Box for Power Amplifier Board TPA3116D2 2.1 Channel https://amzn.to/3nEYGmA by eyalzo
...available in many other stores).https://www.amazon.com/clyxgs-amplifier-tpa3116d2-wireless-speakers/dp/b081sqd63k?tag=rexton08-20
thingiverse
free
Subwoofer amplifier back plate
...g the board's internal header to connect line level signal stepped down using a resistor network on the speaker level signal.
thingiverse
free
TPA3116D2 120w Bluetooth amplifier board wall Mount case by Taddibbes
...sh button switch. will need to drill holes to feed power and speaker wires into box. i haven't decided where i want them yet.
thingiverse
free
TPa3116 bluetooth amplifier case by Pillage_then_burn
...the case.
there is a bit of wiggle room to allow for the rough edges of the boards so align the board to the buttons so they work
thingiverse
free
Bluetooth any speaker using this cheap sanwu bluetooth amplifier module by redesign3dp
...) i found mine at a local thrift store for practically pennies. plug in a guitar effects board and you have a great sounding amp.
grabcad
free
24V Input 5V Out Optocoupler
...24v input 5v out optocoupler
grabcad
24v input 5v out optocoupler isolation control 8 ch solated input signal board
2X50W
thingiverse
free
Case for TPA3116 amplifier 2x50W+100W by Nick_Shl
...ck_shl
thingiverse
sockets can be taken from banana binding post inset wall plate for 3 speakers.
added version with vent holes.
thingiverse
free
Audio power amplifier 2x50W (Tpa3116d2) by kamilice
...sure for my audio power amplifier based around the tpa3116d2.you can find pcb details and download here:http://www.maj.pavlin.si/
thingiverse
free
Vertical Holder for Chinese 2.1 Amplifier 2x50W + 100W by tm1978
...ier 2x50w + 100w by tm1978
thingiverse
this is a sipmple and easy to print vertical holder for a 2.1 channel amplifier. have fun
thingiverse
free
ZK-502C 2x50W Bluetooth amplifier Case by Reddrago789
...es the originally provided bottom plate and 4 m2 screws. i tapped the holes in the pcb supports, be sure not to overtighten them.
thingiverse
free
ZK-502C 2x50W Bluetooth Amplifier Case with Active Cooling by Masterjuggler
...o i soldered wires onto the 24v connector. i have a 24v fan, but you can also use a step down converter to get whatever you need.
thingiverse
free
Arylic Mini v3 up2stream +2x50W amplifier / Verstärker by peanut_GST
...v direkt verarbeiten zu können.
bitte lasst es mich wissen, wenn es leute gibt, die sich für dieses kleine projekt interessieren.
thingiverse
free
ZK-502C Holder by Corti
...zk-502c holder by corti thingiverse zk-502c mini amplifier 2x50w bluetooth model -amplifier board...
thingiverse
free
Amplifier case by Henkku
...thingiverse case for sure electronics amplifier. here is the amplifier:http://www.parts-express.com/sure-electronics-aa-ab32174-2x50wtda7492-class-d-amplifier-board--320-301 you can buy it from ebay...
thingiverse
free
Portable Bluetooth Speaker - with Handle & 5s2p batterypack & sub by gotz
...thingiverse coming soon.. 5s2p 18650 batterypack with bms https://bit.ly/3x5bhtk 2x50w amplifier with integr. bluetooth module https://bit.ly/3wz71ve self-locking push-button https://bit.ly/3w2l5hf...
Tpa3116D2
thingiverse
free
TPA3116D2 box
...tpa3116d2 box
thingiverse
secure with 4 2mm screw at top edge
thingiverse
free
100 W TPA3116D2 VENUS by Moseley
...100 w tpa3116d2 venus by moseley
thingiverse
amplifier with tpa3116d2 made in single box.
electronic college project
thingiverse
free
amp XH-M189 TPA3116D2 case
...h-m189 tpa3116d2 amplifier board.
you can find openscad source on github : https://github.com/paulgreg/amp-xh-m189-tpa3116d2-case
thingiverse
free
cooled case for TPA3116D2 2.1 amplifier by killerbianchex
...cooled case for tpa3116d2 2.1 amplifier by killerbianchex
thingiverse
a simple cooled case for tpa3116d2
thingiverse
free
TPA3116D2 Case by nordinandre
...tpa3116d2 case by nordinandre
thingiverse
just my design of a insta360 go camera mount for the diatone tinawhoop. super simple.
thingiverse
free
TPA3116D2 audio amplifier box by marco_caroube
...tpa3116d2 audio amplifier box by marco_caroube
thingiverse
n/a
thingiverse
free
Audio power amplifier 2x50W (Tpa3116d2) by kamilice
...sure for my audio power amplifier based around the tpa3116d2.you can find pcb details and download here:http://www.maj.pavlin.si/
thingiverse
free
DC12V-24V 2*50W + 100W TPA3116D2 Case by al_bert
...dc12v-24v 2*50w + 100w tpa3116d2 case by al_bert
thingiverse
dc12v-24v 2*50w + 100w tpa3116d2 case
thingiverse
free
Icstation TPA3116D2 Amp Case by mrspiffy
...ock solid and will last for years.
update: added a better looking knob.
here's the link for the amp: https://amzn.to/3ob1p6m
thingiverse
free
Box for Power Amplifier Board TPA3116D2 2.1 Channel https://amzn.to/3nEYGmA by eyalzo
...available in many other stores).https://www.amazon.com/clyxgs-amplifier-tpa3116d2-wireless-speakers/dp/b081sqd63k?tag=rexton08-20
Guppyk
thingiverse
free
Radiator Humidifier by guppyk
... resin (approx. us $5) to make my prints 100% waterproof: epoxy resin.
hope you like it and if you like it please like it!
enjoy!
thingiverse
free
Try Square / Carpenter's Square by guppyk
...rint. print at 0.2 mm with 30 % infill. ideally (optional) change filament once the ruler is completetd.
hope you like it. enjoy!
thingiverse
free
Slug / Snail Barrier by guppyk
...ver, you can also use the fastener to attach a second (third, fourth...) print to get larger diameters for larger plants.
enjoy!
thingiverse
free
Bee Queen Transport Cage by guppyk
...t in some transparent color (so you can see what actually happens inside the cage) at 0.2 mm layer height and 100% infill.
enjoy!
thingiverse
free
Bee Queen Excluder by guppyk
... height. no supports or plate adhesion needed. make sure to remove any sharp edges so the bees won't hurt themselves.
enjoy!
thingiverse
free
Universal Table Clamp / Lamp Mount by guppyk
...anything to the back of the clamp with 4 m3 screws (spaced 17.5x20mm) or to the adapter with two m5 screws (spaced 20 mm).
enjoy!
thingiverse
free
Beehive Entrance Reducers - Different Sizes by guppyk
...asy print. no supports or plate adhesion needed. print in any color your bees like at 0.2 mm layer height and 100% infill.
enjoy!
thingiverse
free
Caliper Pen (Metric and Imperial) by guppyk
....12) with 50+% infill in pla (or abs, petg...). you will need to enable support for parta (for the tip).
hope you like it. enjoy!
thingiverse
free
Planter / Pot / Vase - Four Sizes by guppyk
...pe you like it, and if you like it, please like it!
should be an easy print. print with any filament, any infill, any resolution.
thingiverse
free
Key Safe / Vault / Box - Two Sizes by guppyk
...infill. use some unobtrusive color. use two 3 - 4 mm screws to mount.
hope you like it and if you like it, please like it. enjoy!
Amplifier
3d_ocean
$16
Amplifier
...here just for render of presentation. all formats includes amplifier only. this is amplifier and this is my own design. design...
turbosquid
$25
Amplifier
...rbosquid
royalty free 3d model amplifier for download as 3dm on turbosquid: 3d models for games, architecture, videos. (1516647)
turbosquid
$18
Amplifier
...id
royalty free 3d model amplifier for download as ma and ma on turbosquid: 3d models for games, architecture, videos. (1587057)
turbosquid
$55
Amplifier
...y free 3d model amplifier for download as blend, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1612447)
turbosquid
$29
Amplifier
...ree 3d model amplifier for download as 3ds, obj, c4d, and fbx on turbosquid: 3d models for games, architecture, videos. (1228418)
turbosquid
$10
amplifier
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
Amplifier
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$25
Amplifier
...lly created with 3ds max 2012 -max file with v-ray adv 2.10 materials and mental ray materials - unit system is set to centime...
archive3d
free
Amplifier 3D Model
...amplifier 3d model
archive3d
amplifier
amplifier - 3d model for interior 3d visualization.
archive3d
free
Amplifier 3D Model
...o equipment
amplifier vox n111213 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.
Stereo
turbosquid
$50
Stereo
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$18
stereo
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
Stereo Sound
...squid
royalty free 3d model stereo sound for download as obj on turbosquid: 3d models for games, architecture, videos. (1342541)
evermotion
$10
stereo 65 am144
...reo system with all textures, shaders and materials. it is ready to use, just put it into your scene.. evermotion 3d models shop.
evermotion
$10
stereo 62 am144
...reo system with all textures, shaders and materials. it is ready to use, just put it into your scene.. evermotion 3d models shop.
evermotion
$10
stereo 63 am144
...reo system with all textures, shaders and materials. it is ready to use, just put it into your scene.. evermotion 3d models shop.
evermotion
$10
stereo 64 am144
...reo system with all textures, shaders and materials. it is ready to use, just put it into your scene.. evermotion 3d models shop.
evermotion
$10
stereo 66 am144
...reo system with all textures, shaders and materials. it is ready to use, just put it into your scene.. evermotion 3d models shop.
evermotion
$10
stereo 75 am144
...reo system with all textures, shaders and materials. it is ready to use, just put it into your scene.. evermotion 3d models shop.
evermotion
$10
stereo 73 am144
...reo system with all textures, shaders and materials. it is ready to use, just put it into your scene.. evermotion 3d models shop.
Bluetooth
3d_ocean
$16
Bluetooth handset
...ooth handset
3docean
bluetooth bluetooth handset concept handset headphone high poly modern music new
high poly bluetooth handset
turbosquid
$35
Bluetooth
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
free
USB-Bluetooth
...luetooth
3ddd
bluetooth
usb-bluetooth с прозрачным корпусом. камера и освещение выставлены. камера проанимирована на презентацию.
3d_export
$5
bluetooth card
...bluetooth card
3dexport
this is a simplified bluetooth card with which you can create cases
turbosquid
$2
Bluetooth Speaker
...royalty free 3d model bluetooth speaker for download as blend on turbosquid: 3d models for games, architecture, videos. (1281743)
turbosquid
$5
Bluetooth Speaker
...y free 3d model bluetooth speaker for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1336601)
turbosquid
$5
Bluetooth Speaker
...y free 3d model bluetooth speaker for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1336600)
turbosquid
$5
Bluetooth Speaker
...y free 3d model bluetooth speaker for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1336599)
turbosquid
$3
Bluetooth speaker
...y free 3d model bluetooth speaker for download as obj and fbx on turbosquid: 3d models for games, architecture, videos. (1165662)
turbosquid
$19
Bluetooth Speaker
...odel bluetooth speaker for download as 3ds, obj, c4d, and fbx on turbosquid: 3d models for games, architecture, videos. (1432534)