Cults
BIG DIY 3D Printer
by Cults
Last crawled date: 6 years, 1 month ago
Big FDM Printer
The idea of this printer is that you can make it as large as you want and as cheap as possible :-)
Basically a printer is an X, Y and Z axis. So I made an X and Y axis that is mountable on any sort of construction that gives it height. This construction can be made of material that you have lying around.
If you have wood you can use that. If you have steel pipes you can use that. You can even build it from stones if you want. I made it on an old CNC Router frame I once build. I just added aluminum pipes I had laying in the backyard. With this I build a squire platform which carries the X and Y axis. If I make this platform higher the printer can print higher. :-)
Then of course you also need a print bed. Most of that construction can also be made of any material you have laying around. I used extruded aluminum lengths that limited me to a height of 710 mm. the printed parts are just to couple them and hold the motors and spindles. The dimensions of the extruded aluminum lengths I used are 30x33mm. So the parts for the Z axis are made to fit that. The gliding part in the vertical direction holds 8 608 bearings each side. “bearing holder L.stl & bearing holder R.stl” are super solid, but take a lot of material. Therefor I also made the “bearing holder small” STL's to save material. No the one peace is hacked in two peaces so they have to be held apart with a threaded rod. You can see it on the pictures. Initially these parts where made for a spindle, but because I could not find them 1 meter long, I used Threaded rod instead. For implementation of the M8 nut, you have to use the M8 nut converter part. Also it's recommended to grease the threaded rod also.
For the X and Y axis setup, I used 10mm x 1000mm guiding rods. That means that the X axis is 714mm and the Y axis is 758mm in length. My heat bed can reach 710mm in height. But the glass plate of my heat bed is only 300 x 300mm so I limited my printer to 300x300x700mm at the moment. Of course the bed can be made bigger and so the print dimensions get bigger.
To take away vibrations and keep these long rods straight, you can use the “X axis tension bar holder”. Install one on each end of the x axis rod and mount a M10 threaded rod in them. It's much easier to watch the pictures I guess :-). on the pictures there is installed only one, but I intend to install a second one on the other X axis rod. With only one installed you get an uneven load and uneven vibrations in the two rods.
There is a option for a small 30x30 cooling fan for the X motor, but is optional.
Of course all timing belts have tensioners.
Under the X wagon is an optional slot where a LED strip can be mounted. The dimensions of the strip are 36x9x1 mm made by Dymand v2 DUL2 201611. I took it out of an cheap USB led lamp you cab see on one of the pictures.
Because this is so big, there are two motors for the Y axis and two for the Z axis. The controller is a ramps 1.4 and Arduino Mega. The problem is that you can’t install more than one driver per axis. So you have to solder a second motor driver parallel to the one on the ramps board. It’s advisable to take the motor power directly from the power connector on the board and to install an extra capacitor for each extra driver.
A printer also needs an extruder. :-) Because I print with ABS a lot this one is designed to do just that (but it also works with other filaments).
With ABS printing you do not want to have airflow passing the printed parts.
Therefor the air is inhaled from above. Then passed through to the Hot-end and then back out at the top. The same airflow construction is also made for the motor. This way the printed part never gets cooled by these 2 fans. For the dimensions of these snail house fans, see picture.
Also I wanted an extruder on which changing filament is easy. On most extruders you can’t see the filament wire and that can make it hard to change filament. If you run out of filament due the print, you are in big trouble. Therefor I made this one in such a way that you can always see the filament wire.
Because I have 3 different sizes of Filament (1.75mm, 2.85mm & 3mm) this extruder can use them all.
To do this I have made an exchangeable filament wire guide. For the 1.75 mm filament I also need to put in a Teflon tube because the hot-end is made for 3mm wire. (I can recommend the Teflon tube anyways because the filament go’s in much smoother). The filament guide is also adjustable so you can guide you filament perfectly. In the photos you do not see this guide because that is still the proto type. On that model the 3mm guide is fixed to the body. Not so smart, because you can’t adjust anything anymore. Also I broke it :-) . As a lose part you can just print it out again. The guide is mounted using a washer, M3 nut and 10mm bolt.
The little filament driver (11mm diameter) is mounted on an M8x50mm bolt I had lying around. On the lathe I turned the end of this M8 bolt down to 5mm so the driver can be mounted on it. See pictures.
The Hot-end is a cheap Chinese one I do not even know the name of, but it works very good. For the dimensions of this Hot-end see pictures.
The stepper motor is a Nema 17 x 47mm. I recommend a strong motor for this if you want to use 2.85 & 3mm filament wire. In the picture you see a 42BYGHW811, but I use an SL42S247A at the moment (a bit more torque). As a driver I still use an A9844 with heavy cooling and heat sink.
For the main body I had to add support material. See picture about the removal of the support material. All other parts can be printed without support. After assembly it is wise to put katon tape on the bottom to protect the plastic from all the heat.
This way the plastic holds longer
Also Included is a Marlin script that should work. Hence for printing with PET-G 1.75mm I had to turn the flow-rate back to 49%. Steps/mm for the extruder motor may need some tweaking. For ABS 3mm it did work ok. Hence the blue ABS print has deformed due to warping. But that's expected because it's an open structure. I have order PLA to try that for printing vases. With the transparent PET-G it works great!
For the Z axis setup you need:
16X 608ZZ bearing
1X end switch
16X M8 bolt or threaded rod 85mm and nuts
2X spindle 8mm and spindle nut or M8 threaded rod and nut
2X stepper nema 17
2X motor to spindle connector 5mm to 8mm
6X M4x40mm bolt
6X M4 nut
8X M3x10mm bolt
8x M3x20mm bolt and nuts are optional if you use the M8 converter part.
For the X and Y axis setup you need:
4X sliding rod 10mm length is of you own choise
4X linear bearing LM10UU
4X linear bearing LM10UU in housing
6X F623ZZ bearing for timing belt tension-ers
3X timing belts and pulley's
3X Stepper Nema 17
2X end switch
1X LED strip but is optional
1X 30x30mm Fan but is also optional
8X M3x20mm & nuts are optional for the X axis tension bar
2X M10 threaded rod and 4 nuts are optional for the X axis tension bar
16X M5x10mm
3X M4x40mm bolt
3X M4x40mm bolt
12X M4x10mm bolt
24X M4 nut
24X M3x10mm bolt
8X M3x20mm bolt
32X M3 nut
For the extruder you need:
3x bearing 608z
1x 11mm driver
1X M8 x 50mm bolt or something similar
1x hot-end
2x snail house fan
1X spring (optional, depending on filament material)
1X nema 17 stepper
1x kapton tape
12X M3 nut
4X M3 x6mm bolt
9X M3 x 10 mm bolt
3X M3 x20mm bolt
9X M3 washer (optional)
1X M3 big washer for filament guide
8X M4 nut
5X M4 x20mm bolt
1X M4 x40mm bolt
5X M4 washer (optional)
But of course these parts are just a indication for everybody will build their printer in another way.
That's what this concept is all about. :-)
I hope I didn't forget anything, but If you have questions feel free to ask them :-)
PS: I know, my so called curtains are not very creative :-)
The idea of this printer is that you can make it as large as you want and as cheap as possible :-)
Basically a printer is an X, Y and Z axis. So I made an X and Y axis that is mountable on any sort of construction that gives it height. This construction can be made of material that you have lying around.
If you have wood you can use that. If you have steel pipes you can use that. You can even build it from stones if you want. I made it on an old CNC Router frame I once build. I just added aluminum pipes I had laying in the backyard. With this I build a squire platform which carries the X and Y axis. If I make this platform higher the printer can print higher. :-)
Then of course you also need a print bed. Most of that construction can also be made of any material you have laying around. I used extruded aluminum lengths that limited me to a height of 710 mm. the printed parts are just to couple them and hold the motors and spindles. The dimensions of the extruded aluminum lengths I used are 30x33mm. So the parts for the Z axis are made to fit that. The gliding part in the vertical direction holds 8 608 bearings each side. “bearing holder L.stl & bearing holder R.stl” are super solid, but take a lot of material. Therefor I also made the “bearing holder small” STL's to save material. No the one peace is hacked in two peaces so they have to be held apart with a threaded rod. You can see it on the pictures. Initially these parts where made for a spindle, but because I could not find them 1 meter long, I used Threaded rod instead. For implementation of the M8 nut, you have to use the M8 nut converter part. Also it's recommended to grease the threaded rod also.
For the X and Y axis setup, I used 10mm x 1000mm guiding rods. That means that the X axis is 714mm and the Y axis is 758mm in length. My heat bed can reach 710mm in height. But the glass plate of my heat bed is only 300 x 300mm so I limited my printer to 300x300x700mm at the moment. Of course the bed can be made bigger and so the print dimensions get bigger.
To take away vibrations and keep these long rods straight, you can use the “X axis tension bar holder”. Install one on each end of the x axis rod and mount a M10 threaded rod in them. It's much easier to watch the pictures I guess :-). on the pictures there is installed only one, but I intend to install a second one on the other X axis rod. With only one installed you get an uneven load and uneven vibrations in the two rods.
There is a option for a small 30x30 cooling fan for the X motor, but is optional.
Of course all timing belts have tensioners.
Under the X wagon is an optional slot where a LED strip can be mounted. The dimensions of the strip are 36x9x1 mm made by Dymand v2 DUL2 201611. I took it out of an cheap USB led lamp you cab see on one of the pictures.
Because this is so big, there are two motors for the Y axis and two for the Z axis. The controller is a ramps 1.4 and Arduino Mega. The problem is that you can’t install more than one driver per axis. So you have to solder a second motor driver parallel to the one on the ramps board. It’s advisable to take the motor power directly from the power connector on the board and to install an extra capacitor for each extra driver.
A printer also needs an extruder. :-) Because I print with ABS a lot this one is designed to do just that (but it also works with other filaments).
With ABS printing you do not want to have airflow passing the printed parts.
Therefor the air is inhaled from above. Then passed through to the Hot-end and then back out at the top. The same airflow construction is also made for the motor. This way the printed part never gets cooled by these 2 fans. For the dimensions of these snail house fans, see picture.
Also I wanted an extruder on which changing filament is easy. On most extruders you can’t see the filament wire and that can make it hard to change filament. If you run out of filament due the print, you are in big trouble. Therefor I made this one in such a way that you can always see the filament wire.
Because I have 3 different sizes of Filament (1.75mm, 2.85mm & 3mm) this extruder can use them all.
To do this I have made an exchangeable filament wire guide. For the 1.75 mm filament I also need to put in a Teflon tube because the hot-end is made for 3mm wire. (I can recommend the Teflon tube anyways because the filament go’s in much smoother). The filament guide is also adjustable so you can guide you filament perfectly. In the photos you do not see this guide because that is still the proto type. On that model the 3mm guide is fixed to the body. Not so smart, because you can’t adjust anything anymore. Also I broke it :-) . As a lose part you can just print it out again. The guide is mounted using a washer, M3 nut and 10mm bolt.
The little filament driver (11mm diameter) is mounted on an M8x50mm bolt I had lying around. On the lathe I turned the end of this M8 bolt down to 5mm so the driver can be mounted on it. See pictures.
The Hot-end is a cheap Chinese one I do not even know the name of, but it works very good. For the dimensions of this Hot-end see pictures.
The stepper motor is a Nema 17 x 47mm. I recommend a strong motor for this if you want to use 2.85 & 3mm filament wire. In the picture you see a 42BYGHW811, but I use an SL42S247A at the moment (a bit more torque). As a driver I still use an A9844 with heavy cooling and heat sink.
For the main body I had to add support material. See picture about the removal of the support material. All other parts can be printed without support. After assembly it is wise to put katon tape on the bottom to protect the plastic from all the heat.
This way the plastic holds longer
Also Included is a Marlin script that should work. Hence for printing with PET-G 1.75mm I had to turn the flow-rate back to 49%. Steps/mm for the extruder motor may need some tweaking. For ABS 3mm it did work ok. Hence the blue ABS print has deformed due to warping. But that's expected because it's an open structure. I have order PLA to try that for printing vases. With the transparent PET-G it works great!
For the Z axis setup you need:
16X 608ZZ bearing
1X end switch
16X M8 bolt or threaded rod 85mm and nuts
2X spindle 8mm and spindle nut or M8 threaded rod and nut
2X stepper nema 17
2X motor to spindle connector 5mm to 8mm
6X M4x40mm bolt
6X M4 nut
8X M3x10mm bolt
8x M3x20mm bolt and nuts are optional if you use the M8 converter part.
For the X and Y axis setup you need:
4X sliding rod 10mm length is of you own choise
4X linear bearing LM10UU
4X linear bearing LM10UU in housing
6X F623ZZ bearing for timing belt tension-ers
3X timing belts and pulley's
3X Stepper Nema 17
2X end switch
1X LED strip but is optional
1X 30x30mm Fan but is also optional
8X M3x20mm & nuts are optional for the X axis tension bar
2X M10 threaded rod and 4 nuts are optional for the X axis tension bar
16X M5x10mm
3X M4x40mm bolt
3X M4x40mm bolt
12X M4x10mm bolt
24X M4 nut
24X M3x10mm bolt
8X M3x20mm bolt
32X M3 nut
For the extruder you need:
3x bearing 608z
1x 11mm driver
1X M8 x 50mm bolt or something similar
1x hot-end
2x snail house fan
1X spring (optional, depending on filament material)
1X nema 17 stepper
1x kapton tape
12X M3 nut
4X M3 x6mm bolt
9X M3 x 10 mm bolt
3X M3 x20mm bolt
9X M3 washer (optional)
1X M3 big washer for filament guide
8X M4 nut
5X M4 x20mm bolt
1X M4 x40mm bolt
5X M4 washer (optional)
But of course these parts are just a indication for everybody will build their printer in another way.
That's what this concept is all about. :-)
I hope I didn't forget anything, but If you have questions feel free to ask them :-)
PS: I know, my so called curtains are not very creative :-)
Similar models
thingiverse
free
BIG DIY 3D Printer by JobSmolders
...11mm driver 1x m8 x 50mm bolt or something similar 1x hot-end 2x snail house fan 1x spring (optional,...
cults
free
Geared Extruder 2
...s
1x m8 bolt for the driver gear. see picture for the dimensions
1x filament driver gear
3x bearing 608z
1x nema 17 stepper motor
thingiverse
free
Easy exchange filament extruder by JobSmolders
...11mm driver 1x m8 x 50mm bolt or something similar 1x hot-end 2x snail house fan 1x spring (optional,...
thingiverse
free
Geared Extruder using M8 extruder driver by JobSmolders
...r little gear)
9x m3 washer
11x m3 nut
if you have any questions or you think i forgot something, feel free to ask or comment :-)
cults
free
Easy exchange filament extruder
...11mm driver 1x m8 x 50mm bolt or something similar 1x hot-end 2x snail house fan 1x spring (optional,...
thingiverse
free
Prusa X Belt - Extruder Fix (keeps the belt away from the stepper motor) by ooxtcoo
... treaded rod
3.) 1x m3 nut
4.) 2x m3 washers
5.) 1x m3x20 screw
6.) 1x 608z bearing
7.) 2x big m8 washers
8.) 3x small m8 washers
thingiverse
free
XY_Plotter by modelatolyesi
...
1x ball-pen spring.
electronics:
arduino uno
cnc shield.
2x a4988 stepper driver.
9g. servo.
4x micro switch.
extension cables.
thingiverse
free
M8 Quick Release Nut by Scatman96
...m8 rod.
it´s easy to print.
what you need:
1x - quick_release_body.stl
1x - quick_release_lever.stl
1x - m3x20 screw
1x - m3 nut
thingiverse
free
Alpha Direct Drive Extruder by engineglue
...upply list; this is a minimal design. you can use m4 bolts and nuts to mount it. it mounts to a standard aluminum mounting plate.
thingiverse
free
prusa i3 quick acces extruder by yoyoek1
...mm (depends on spring length
[1x] m8 x 22mm (or more)
[3x] bearing 608
[1x] m8 hot bolt
gears from prusa i3 rework fits.
2560
3ddd
free
Odeon light 2560/1T и бра Odeon light 2560/1W
...
ширина - 15 см
люстру odeon light 2560/5 можно скачать здесь -http://3ddd.ru/3dmodels/show/liustra_odeon_light_2560_5
3ddd
$1
Люстра Odeon light 2560/5
... light
диаметр - 61 см
высота без цепи - 42 см
в fbx убрала сглаживание с плетеных плафонов, т.к. файл получался очень тяжелым
3ddd
$1
Кофейный столик Naver AK 2560
...cmhttp://www.navercollection.dk/index.php?option=com_content&view;=article&id;=345&itemid;=345⟨=en
3ddd
$1
Environment 105
...environment 105 3ddd 25601024 бесшовная по...
3ddd
$1
Ciani
...ciani 3ddd ciani размеры примерные. артикул 2560 01...
3ddd
$1
Environment 114
...environment 114 3ddd 25601024 бесшовная по горизонтали...
3ddd
free
Environment 68
...environment 68 3ddd 25601024 бесшовное по горизонтали...
3ddd
$1
Dinner Table
...dinner table 3ddd dk home , обеденный размеры: 25601200*750 ...
3ddd
free
мебельныеткани
...мебельныеткани 3ddd мебельные ткани, в архиве 56 текстур, разрешение 2560720 рх, качество...
3ddd
$1
мебельные ткани
...ткани 3ddd мебельные ткани, в архиве 53 текстуры, разрешение 2560720 рх, качество...
Reprap
turbosquid
$1
Go Pro Balance Hand Wand Reprap
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
thingiverse
free
Reprap keychain by AndreasD
...reprap keychain by andreasd
thingiverse
a simple reprap logo keychain for the reprap lovers like me!
thingiverse
free
REPRAP CHASSIS by leonk
...reprap chassis by leonk
thingiverse
reprap chassis
thingiverse
free
COUPLER RepRap by leonk
...coupler reprap by leonk
thingiverse
coupler reprap
thingiverse
free
RepRap Switch by n3opl4n
...reprap switch by n3opl4n
thingiverse
switch for reprap prusa i2.
p-space hackerspace logo.
thingiverse
free
Reprap pendulum by mr_seeker
...ap pendulum by mr_seeker
thingiverse
its a pendulum in the shape of the reprap logo. it has a 1mm hole for putting a wire in it.
thingiverse
free
RepRap Ornament by redskinsjbs
...reprap ornament by redskinsjbs
thingiverse
i tried to make a teardrop shape ornament for the holiday season in honor of reprap
thingiverse
free
Spool holder reprap by mdnm
...spool holder reprap by mdnm
thingiverse
this is spool holder for reprap.
thingiverse
free
RepRap logo keyring by mrjohnc
...reprap logo keyring by mrjohnc
thingiverse
reprap logo keyring
thingiverse
free
REPRAP LEON K by leonk
...reprap leon k by leonk
thingiverse
reprap leon k
Mega
3ddd
$1
BoConcept / Mega
...boconcept / mega
3ddd
boconcept
boconcept mega
3ddd
free
Angelo - Mega shoin
... mega shoin , shoin
angelo - mega shoin - 3dmax 2008
3ddd
$1
Комод MEGA
...вана по фото с учетом реальных размеров.
стек не сколапсен, есть возможность регулировки уровня сглаживания.
текстуры в архиве.
3ddd
$1
Hulsta / Mega-design
...hulsta / mega-design
3ddd
hulsta
hulsta mega-design
design_connected
$18
Tolomeo Mega
...
photo-realistic 3d models of the tolomeo mega floor lamps from artemide for 3d architectural and interior design presentations.
turbosquid
$119
Mega Soldier
... free 3d model mega soldier for download as obj, c4d, and fbx on turbosquid: 3d models for games, architecture, videos. (1148568)
3ddd
$1
Massproductions Mega
... massproductions , mega
ширина: 180 см
глубина: 90 см
высота: 79 см
3d_export
$4
mega metro station
...mega metro station
3dexport
mega metro station. ready to game. thanks all downloaders!!
3ddd
$1
BAS Mega
...bas mega
3ddd
bas , ванна
ванна
turbosquid
$25
Mega tank
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Arduino
turbosquid
$7
Arduino
...turbosquid
royalty free 3d model arduino for download as max on turbosquid: 3d models for games, architecture, videos. (1197165)
turbosquid
$3
Arduino
...turbosquid
royalty free 3d model arduino for download as c4d on turbosquid: 3d models for games, architecture, videos. (1305484)
3d_export
$5
arduino satellite
...rt
this model is the exact arduino based satellite model with some basic sensors and camera modules and also includes batteries.
turbosquid
$1
Arduino UNO
...alty free 3d model arduino uno for download as , stl, and wrl on turbosquid: 3d models for games, architecture, videos. (1515932)
3d_export
$5
esp8266 box arduino
...esp8266 box arduino
3dexport
box for esp8266 module with wire hole. inside dimensions: 49x26 mm. height 15 mm.
3d_export
$60
Arduino Uno Rev3 Microcontroller 3D Model
...mega328p circuit board spark cable wire 5v 74v 9v 111v
arduino uno rev3 microcontroller 3d model danielgarnier4403 97237 3dexport
3d_export
free
arduino rover kit
...no!!! materials: no!!! rigged: no animated: no uv mapped: no it is not an exact copy of the original! not subject to 3d printing!
3d_ocean
$7
The housing for the 3d Printer
...the housing for the 3d printer 3docean arduino device housing stl the housing consists of two portions:...
3d_export
$5
arm 4 axis
...uno -4 servo motor 180° -3 joystick (x,y) for arduino -mdf wood -some wires -cnc laser cut...
3d_export
$5
solar tracker
...machine for the frame . list of material : -arduino uno -2 step motor with driver -4 ldr sensor...
Diy
3d_export
free
DIY 3D Printer
...diy 3d printer
3dexport
diy 3d printer model
turbosquid
$3
Diy Desk to Bench
...odel diy desk to bench for download as 3ds, max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1506589)
turbosquid
$2
DIY Moon Light
...model diy moon light for download as obj, fbx, blend, and dae on turbosquid: 3d models for games, architecture, videos. (1501170)
3d_export
$8
DIY CNC Router 3D Model
...diy cnc router 3d model
3dexport
cnc; router; diy; homemade
diy cnc router 3d model maikeru86 58463 3dexport
turbosquid
$5
Diy Kitchen Cabinets
...itchen cabinets for download as 3ds, obj, fbx, blend, and dae on turbosquid: 3d models for games, architecture, videos. (1197373)
3d_export
free
Download free Diying Plant 3D Model
...download free diying plant 3d model
3dexport
diying plant blender
diying plant 3d model visitorsama 98607 3dexport
3ddd
$1
DIY coffee table + decor
... рамка для фото
кофейный столик diy 400х350х600(h) мм. моделился по фото. внимание: материалы - corona.
turbosquid
$3
Diy Wire Lamp Shade
...free 3d model diy wire lamp shade for download as 3ds and fbx on turbosquid: 3d models for games, architecture, videos. (1347605)
cg_studio
$12
DIY MONGOLIAN LAMB STOOLS3d model
... hair soft pile white
.max - diy mongolian lamb stools 3d model, royalty free license available, instant download after purchase.
cg_studio
$10
DIY MONGOLIAN LAMB STOOLS3d model
...ol goat ewe furniture
.max - diy mongolian lamb stools 3d model, royalty free license available, instant download after purchase.
Big
3ddd
$1
Big Ben
...big ben
3ddd
big ben , часы
часы moooi - big ben
by marcel wanders
3d_export
$5
Sexy big
...sexy big
3dexport
sexy big
3d_export
$5
big sword
...big sword
3dexport
it is a big sword, with a designe
turbosquid
$5
Big
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
big
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
big monster
...big monster
3dexport
big monster 3d model printing
3ddd
$1
Kioto BIG
...kioto big
3ddd
itre , kioto
kioto big . itre
3d_ocean
$25
Big Bag
...the files are designed with clean topology, so are easy to edit & customize. there are 4 versions of files that are provid...
3ddd
$1
BIG BOB
...
version: 2014
preview: no
units: millimeters
polys: 391984
model parts: 20
render: v-ray
formats: 3ds max 2014, obj
design_connected
$13
Big Table
...big table
designconnected
bonaldo big table computer generated 3d model. designed by gilles, alain.
Printer
archibase_planet
free
Printer
...inter
archibase planet
printer laser printer pc equipment
printer n120614 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Printer
...rchibase planet
laser printer office equipment computer equipment
printer - 3d model (*.gsm+*.3ds) for interior 3d visualization.
turbosquid
$100
Printer
...er
turbosquid
royalty free 3d model printer for download as on turbosquid: 3d models for games, architecture, videos. (1487819)
turbosquid
$3
Printer
...turbosquid
royalty free 3d model printer for download as max on turbosquid: 3d models for games, architecture, videos. (1670230)
turbosquid
$1
printer
...turbosquid
royalty free 3d model printer for download as max on turbosquid: 3d models for games, architecture, videos. (1595546)
turbosquid
$1
printer
...turbosquid
royalty free 3d model printer for download as max on turbosquid: 3d models for games, architecture, videos. (1595105)
turbosquid
$7
Printer
...royalty free 3d model printer for download as ma, ma, and obj on turbosquid: 3d models for games, architecture, videos. (1644580)
turbosquid
$30
Printer
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Printer
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$18
printer
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
4
turbosquid
$9
Office Chair 4-4
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
doors- 4
...doors- 4
3dexport
doors 4
3d_export
$5
hinge 4
...hinge 4
3dexport
hinge 4
3ddd
$1
Штора №4
...штора №4
3ddd
штора №4
3d_export
free
playstation 4
...playstation 4
3dexport
playstation 4
3ddd
$1
nexus 4
...nexus 4
3ddd
lg , телефон
nexus 4
3ddd
$1
4 Poufs
...4 poufs
3ddd
пуф
4 soft poufs
turbosquid
$12
Calligraphic Digit 4 Number 4
...hic digit 4 number 4 for download as max, obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1389332)
3ddd
$1
Dauphin 4+
...dauphin 4+
3ddd
кресло
dauphin 4+ конференц кресло
3ddd
$1
iPhone 4
...
3ddd
apple , iphone , телефон
модель iphone 4.
1
turbosquid
$15
ring 1+1
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
chair(1)(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$8
Chair(1)(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
RING 1(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
Table 1(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
house 1(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$59
Formula 1(1)
...lty free 3d model formula 1 for download as max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1567088)
design_connected
$11
No 1
...no 1
designconnected
sibast no 1 computer generated 3d model. designed by sibast, helge.
turbosquid
$2
desert house(1)(1)
...3d model desert house(1)(1) for download as 3ds, max, and obj on turbosquid: 3d models for games, architecture, videos. (1055095)
turbosquid
$50
door 1 darkwood 1
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.