Bicycle Light Bracket Mount by JoeBowler

Last crawled date: 3 years, 4 months ago

Bicycle light bracket. Semi-universal if you can utilize the screw. I made this to fix my Blackburn bicycle light. Seems the brackets come in a variety of designs and a replacement bracket for the light I had was not to be found, so I made one and shared it for whomever may need it. This bracket Is very niche but does leave room to possible be used by another system or used with a little creativity. Handlebar size vary widely; even mine as several diameters in thickness from the center to outward within an even an inch it varied. So I uploaded several sizes. I was even able to spread apart PLA plastic to get it on the handlebar. Use your favorite filament. Maybe you prefer the double screw mount? I only made one and thought the one screw split mount was a better design and is less bulky. The double screw bracket was mad with a 21.5mm diameter, therefore would mount on a less narrow tube bar (up near your hand grips). I doubt anyone will need that one but you never know. Screw holes and cut out for the hex nuts are 3mm.