Thingiverse
Bibo enhanced bed clamps by stevesch
by Thingiverse
Last crawled date: 3 years ago
Redesigned bed clamps for the Bibo2 Laser Touch X (and similar) printers-- easier to assemble than originals, and hold heat bed and glass more firmly together as well. Included in the print are bolt covers for the opposite contact points of the glass bed, as well as some simple bed clips for custom bed fastening.
Assemble as in photos, or refer to post-printing instructions for details.
Printed in PLA these are good for bed temps of about 75 C or below. As @VladimirKHV mentions, these will fail at higher (80+ C) bed temperatures. As shown in photos, my white PLA clamps eventually deformed at higher bed temps. They still did a good job for quite some time at 60C bed temp.
My clamps printed using PETG with 100% infill (in photo printed w/red PETG, on Amazon http://a.co/hhiR7aS) will hopefully withstand higher temps.
Version 2 changes:
reinforcement around top clamp mounting hole to reduce deformation at higher bed temps.
Bottom clamp hole for threading screw has new inserts to provide tighter threading.
Assemble as in photos, or refer to post-printing instructions for details.
Printed in PLA these are good for bed temps of about 75 C or below. As @VladimirKHV mentions, these will fail at higher (80+ C) bed temperatures. As shown in photos, my white PLA clamps eventually deformed at higher bed temps. They still did a good job for quite some time at 60C bed temp.
My clamps printed using PETG with 100% infill (in photo printed w/red PETG, on Amazon http://a.co/hhiR7aS) will hopefully withstand higher temps.
Version 2 changes:
reinforcement around top clamp mounting hole to reduce deformation at higher bed temps.
Bottom clamp hole for threading screw has new inserts to provide tighter threading.
Similar models
thingiverse
free
Heat-Bed Clamp 6mm by Sisul
...few hours at 50-60°c, and only noticed a slight stress fatigue. the clamp is still holding the glass bed well on the heating bed.
thingiverse
free
Glass Bed Clamp
...ge is the printing material and thickness of the hold down.
if you need a different jaw clearance, leave a note in the comments.
thingiverse
free
Heatbed glass plate clamps - v2.0 by ngfelixl
...f ~95°c or greater the clamp will permanently deform. printing the clamps with abs should be better, but didn't tried it yet.
thingiverse
free
Cable Hanger Clamp by suveck
...ght stand.
recommend high wall thickness in slicer.
i have only printed this in abs with good results. pla may deform over time.
thingiverse
free
Large Bobbin Holder by mcgeehd
...ry and will deform to a smaller spool and won't hold in a larger spool. so far the petg doesn't seem to have any memory.
thingiverse
free
Window Frame Clamp by cjewell602
...for 1/4-20 bolts, i did have to run a tap through the hole after printing. i printed this on its side (not the way its pictured).
thingiverse
free
Star Trophy by ARMAND252
...le star trophy i made for my wifes preschool
prints well in pla and petg
pla 205c bed 55c
petg 250c bed 70c
used sa filament
thingiverse
free
M10 x 32 ISO standard nut and bolt by metalfishead
...s on
additional info: i use the e3dv6 print head. once printed, the tolerances i gave the threads should allow for easy assembly.
thingiverse
free
Glass bed holder
...want to change hole sized or adjust it to fit different thickness glass, should be very simple.
hope this is helpful for someone!
thingiverse
free
Clips Dishwasher by oakdesign
...ered as spare parts. designed and printed my own ones. with petg. dishwasher is running at 60°c water temp. no deformation so far
Stevesch
thingiverse
free
Hamster tube coupler by stevesch
...cking coupler for hamster tubes (kaytee or similar). replaces hard-to-remove flexible plastic couplers that come with the tubes.
thingiverse
free
Quest 2 3D Scan by stevesch
...essories.
higher and lower resolution models of the headset and touch controllers are included.
(printer settings can be ignored)
thingiverse
free
Oculus Quest Camera Cover by stevesch
...d to guarantee privacy from hackers or facebook.
oculus quest 2 version is at this link:https://www.thingiverse.com/thing:4644108
thingiverse
free
Don't Starve Koalefant by stevesch
...u can finally have your own herd of koalefants!
please contact for high-resolution models, texture maps, and licensing or resale.
thingiverse
free
Quest 2 Touch Controller battery covers by stevesch
...attery covers for the quest 2 touch controllers.
3d scanned and fixed up a bit where the l-shaped clip was too difficult to scan.
thingiverse
free
Oculus Quest 2 Camera Cover by stevesch
...privacy from hackers or facebook.
version for the original oculus quest is at this link:https://www.thingiverse.com/thing:4668767
thingiverse
free
Fedora for Among Us characters by stevesch
...dels, so i modeled one. you may need to scale it to the appropriate size for the particular character model you're printing.
thingiverse
free
TTGO T-Display case for 503450 LiPo battery by stevesch
... lipo battery
modified from the original "battery options" thing located here:https://www.thingiverse.com/thing:4183337
thingiverse
free
M5Stack Atom Lite Microcontroller by stevesch
...r.
it's fairly accurate-- to the level of what i could achieve with calipers, including button, port, led, and pin locations.
thingiverse
free
AirPods Pro 3D Scan by stevesch
... texture fixup was required.
dual extruder stl files are included with black areas separated from white (silver ring is ignored).
Bibo
turbosquid
free
Fisher-Price Bibo and Bibel
...fisher-price bibo and bibel for download as max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1574582)
3d_export
$5
Bomema 3D Model
...bomema 3d model 3dexport wood leather bibo modern stool bench minimalist chair bomema 3d model cheby9...
3ddd
$1
Диван с креслом
...диван с креслом 3ddd угловой , фабрика bibo коллекция capriccio диван реальный. производитель не известен. модель создавалась...
thingiverse
free
bibo de plongée (diving bibo) by VR46
...bibo de plongée (diving bibo) by vr46
thingiverse
bibo de plonger pour accrocher les bouteille sur le harnais
thingiverse
free
Bibo base corners by Charlemann
...bibo base corners by charlemann
thingiverse
simple feet for the bibo 2 touch
thingiverse
free
BIBO Spool Holder - For BIBO printer by chevair
...ot;(with a slope) so the spool won't slip from the holder. i was using it for couple of month now and the difference is huge.
thingiverse
free
Bibo Tensioner by verleihnix
...bibo tensioner by verleihnix
thingiverse
for the x-axis, m3x25 and nut required
made of petg
thingiverse
free
BIBO 3d printer filament guide support by bradenking
...bibo 3d printer filament guide support by bradenking
thingiverse
bibo 3d printer filament guide support
thingiverse
free
Bibo 2 nozzle blower duct by memmop
...thingiverse
this is a blower cooler for my aluminium carriage on my bibo 2.
prints without supports.
print 2 for front and back.
thingiverse
free
Filament Holder for BIBO 3D Printers by billkaroly
...sy. i created this spool holder to provide more peace of mind.
print at .2 layer thickness and use pla. 20 or 30 percent infill.
Enhanced
turbosquid
free
Enhance Flame.max
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
Enhanced Arwing with Original
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$40
Airbus A380 aircraft enhanced
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
Rapidlash Eyelash Enhancing Serum
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$119
Sig Sauer P226 Enhanced Elite 9mm
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$119
Sig Sauer P229 Enhanced Elite 9mm
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$23
bio-enhanced soldier
... shoulders_roughness stuff_base_color stuff_height stuff_metallic stuff_mixed_ao stuff_normal stuff_normal_opengl stuff_roughness
humster3d
$75
3D model of Mk 14 Enhanced Battle Rifle
... 3d model of mk 14 enhanced battle rifle in various file formats. all our 3d models were created maximally close to the original.
turbosquid
$29
Star Trek TNG Voyager Transporter Pattern Enhancers
...rter pattern enhancers for download as max, dwg, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1629422)
turbosquid
$165
Alvar Aalto's Furnitures Collection 1 Enhanced Edition
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Clamps
3d_export
$11
clamp
...clamp
3dexport
clamp
3ddd
free
Clamp
... enricо zanolla , капитоне
дизайнерenrico zanollмодель clamp
3ddd
$1
Clamp
...ricо zanolla , капитоне
дизайнеры
enrico zanolla
andrea di filippo
модель clamp
dzstudio
3d_export
free
clamp
...clamp
3dexport
simple clamp model, more free 3d models here:
3d_export
$5
clamping handle
...clamping handle
3dexport
clamping handle
3ddd
$1
Clamp / DZstudio
... dzstudio , капитоне
люстра clamp от dzstudio/enrico zanolla(италия).
3ddd
$1
Светильник Clamp
...светильник clamp
3ddd
clamp
стеганый светильник clamp в двух цветах в черном и белом.
turbosquid
$29
clamp
...ty free 3d model clamp for download as 3ds, obj, c4d, and fbx on turbosquid: 3d models for games, architecture, videos. (1442049)
turbosquid
$29
clamp
...ty free 3d model clamp for download as 3ds, obj, c4d, and fbx on turbosquid: 3d models for games, architecture, videos. (1442041)
3d_export
$5
Clamp-14
...clamp-14
3dexport
3d model of clamp name 14
Bed
3ddd
$1
bed
...bed
3ddd
bed , постельное белье
bed
3ddd
$1
bed
...bed
3ddd
bed , постельное белье
bed
3ddd
$1
bed
...bed
3ddd
bed , постельное белье
bed
3ddd
$1
bed
...bed
3ddd
bed , постельное белье
bed
3ddd
$1
bed
...bed
3ddd
bed , постельное белье
bed
3ddd
$1
bed
...bed
3ddd
bed , постельное белье
bed
3ddd
free
bed
...bed
3ddd
bed , постельное белье
bed
3ddd
free
bed
...bed
3ddd
bed , постельное белье
bed
3ddd
$1
Bed
...bed
3ddd
bed , постельное белье , постель
bed
3d_export
$7
bed adairs bed
...rs bed
3dexport
bed adairs bed in modern style. if you want a smoother surface, please turn on turbosmooth in the modifier list.