Belt guide by fitimollas

...roller shutter belt guide by ingod thingiverse rolladen-gurtführung roller shutter belt guide

...e with 608zz bearing for y axis by arnold974 thingiverse the flat on the belt guide allows to keep the alignment of the gt2 belt

...e with 625zz bearing for x axis by arnold974 thingiverse the flat on the belt guide allows to keep the alignment of the gt2 belt

...reprappro mendel y belt guide by yel5537 thingiverse reprappro mendel y belt guide. easy installation.

...belt guide by hatswadau thingiverse roller shutter belt guide for 25 mm belt. 42 mm distance between two 5 mm countersunk holes.

...lt guides thingiverse belt guides designed to support moving the stepper motors to the rear of my corxy hypercube style printer.

...belt guide for dual 624zz x axis prusa rework by kriketronic thingiverse this is a simple belt guide using two 624zz bearings.

... guide 624zz by jgarrog thingiverse for prusa i3: guide bearings on belt using 624zz. used in the prusa i3, prusa i2 style.

...hingiverse belt guide for using with bearings r32rs for prusa i3 printer. you can use any bearing with external size of 12.6mm.

...he belt guide. step 2.5t. this consists of two parts, the bearing fits in p2 and then all in the gear. http://www.carlvaello.com/

...fumeral by fitimollas thingiverse fumeral de prova

...trushoo keychain by fitimollas thingiverse an other keychain logo by trushoo (http://www.trushoogeo.com)

...clothes peg by fitimollas thingiverse it can work with or without spring puede trabajar con o sin muelle

...s you to recycle a can and turn it into a pen holder. este aro permite reciclar una lata vacia y convertirla en un posa lapices

... reforzado by fitimollas thingiverse this thing was made with tinkercad. edit it online https://tinkercad.com/things/brxjcelxnel

...mount for oral-b by fitimollas thingiverse this is a simple wall mount for the base of the oral-b tooth brushes with three parts

...e limón. i hope you like it! este es un llavero inspirado en los ninjas del artista callejeo david de limón. espero que te guste!

...illo de un trípode. si no tienes ventilador de capa, es mejor que imprimas dos piezas a la vez para que le de tiempo a enfriarse.

...rs. la anchura útil es de 100 mm. la distancia entre agujeros es de 41.5 mm. http://es.rs-online.com/web/p/impresoras-3d/8625705/

...belt thingiverse belt sleeve for 35mm wide.. use tpu or tpu95 gcode ready

...belt hanger for mission belt by maburke thingiverse hanger for mission belt- hangs belt nicely on the closet rod

...belt hanger. this belt hanger works by placing the stud on the belt in the hole, then hang the hanger. yep, it's that simple.

...belt hanger for trakline belt by tomasf thingiverse a hanger for a single trakline belt.

...belt clip for 9 mm belt by papat400 thingiverse remix the belt lock gt2 for a 9mm belt

...belt rack thingiverse belt hanger

...belt holder thingiverse a simple belt holder.

...hermes belt buckle for 31mm belt by hubiro thingiverse hermes belt buckle for 31mm belt perfect to order as metal print :-)

...t buckle for 31mm belt by hubiro thingiverse bugati belt buckle made for 31mm hermes belt. perfect to order as a metal print :-)

...oner little different. after print you will need a: m3 nut m3 x10+ (screw length your choice) is for the gt2 belt with 6mm width

... by phobosmoon thingiverse another filament guide, with cap. put some double-sided tape under the guide to fix it on your table.

...needed some single guides also. i found the ikea lack filament guide by karnschi so i added them in to .stl file as well... enjoy

...diabolo guide thingiverse diabolo guide for r6 2011

...rse this filament guide is to be used with the spare roller guide when you replaced the plastic extruder with the aluminum one.

...e (e.g. bowden cable) on your prusa. you can purchase the guide here: http://www.mcmaster.com/#8547k23 i recommend a 2ft length.

...ilament guide by todd_optional thingiverse this is a wire guide and wire guide with filament guide for 20x40 extruded aluminum.

...piece of ptfe tube in (od of ~4.1mm) to guide filament to the direct drive. without it the filament spool was unraveling spaghet.

...ww.thingiverse.com/thing:3184808 to be used with: ender 3 filament guide by mattellisonhttps://www.thingiverse.com/thing:3059604

...guide porte, door guide by vieen3d thingiverse pièce pour guider une porte coulissante

...ntial part. tested using makerbot thing-o-matic using abs plastic. fork it on github: https://github.com/servetus/lowerguide