Belt dust cover with bed level option by 3D_PP

Last crawled date: 3 years, 1 month ago

As i have seen many covers and leveling options for the Anycubic Delta Kossel Pulley, i decided to make a combined one.
This is made to use with 200mm glass and NO heat bed.
Insert an M4 nut in the plate and you can use M4 screws in any size you prefer.
The place where the notches are positioned is off the position of the stepper motors.
Even M4x50mm will not hit the motors.
The cups for the springs go into the respective holes on the plate.
You can use some ballpoint springs to give counter pressure to the glass plate.
Just don't use springs that are stiff.
Keep in mind, by using this you will reduce the printing height with about 10mm and you need to adjust your homing setting in your firmware (Marlin on the Anycubic)