Thingiverse
Bed Support by StikkaDesign
by Thingiverse
Last crawled date: 3 years, 1 month ago
Bed support for Tevo Tarantula (or any other with distance holes 209x209mm)
Note
cable carter (you can find the cable chain here: https://www.thingiverse.com/thing:2983107)
aluminum U-profile to stiffen the structure. external measures 8x8mm (internal measures 6x6mm)
only for MGN12 rails. not for stock wheels
you need:
4 M3x30mm screws
8 M3x25mm screws
8 M3 nuts
M3 washers (optional)
3.5mm drill bit
4 stock springs
2 M3x16 and 2 M3 nuts (to block the GT2 with screws)
assembly:
cut the aluminum profile to size and place it in place on the piece below
place the piece on top
insert the four M3x30 screws as a stop (do not mount on the track yet)
drill (use the hole as a guide) and fix the four central M3x25 screws
drill and fix the angle with four M3x25 screws
mount on the rail
Note
cable carter (you can find the cable chain here: https://www.thingiverse.com/thing:2983107)
aluminum U-profile to stiffen the structure. external measures 8x8mm (internal measures 6x6mm)
only for MGN12 rails. not for stock wheels
you need:
4 M3x30mm screws
8 M3x25mm screws
8 M3 nuts
M3 washers (optional)
3.5mm drill bit
4 stock springs
2 M3x16 and 2 M3 nuts (to block the GT2 with screws)
assembly:
cut the aluminum profile to size and place it in place on the piece below
place the piece on top
insert the four M3x30 screws as a stop (do not mount on the track yet)
drill (use the hole as a guide) and fix the four central M3x25 screws
drill and fix the angle with four M3x25 screws
mount on the rail
Similar models
thingiverse
free
Din Rail End Block by Masterkookus
...crew m3x25 screws throiugh them, then mount onto a piece of din rail and tighten down.
m3x25 socket headed cap screw x2
m3 nut x2
thingiverse
free
Bissell Pet Vacuum Wand End Fix by JeenyusPete
...rdingly and again drilled out the rivet behind the button and used that hole as a mount, it was also an m3 bolt and nut i believe
thingiverse
free
Minimalistic Raspberry Mount 40mm Fan Free GPIO by staticcsonka
...e raspberry everywhere with 4 screws which i do not recommend since you should know which screws depending on your destination :)
thingiverse
free
Creality/Ender bed screw drilling template for Anycubic Mega Zero by ksanislo
...the stock anycubic m3 bed mount screws. there shouldn't be any major problems if you need to drill out to 4mm or a bit more.
thingiverse
free
Y guide - MGN12H linear rails (RedBot) by NickRimmer
...s, for aluminium profile
4 pcs - m5 square nuts
4 pcs - m5 washers
to mount each of rail i used 4pcs of m3x10 screws with t-nuts.
thingiverse
free
ET4 X Linear Rail by peddomgar
...rt has two holes that fits with my extruder mellow nf-bmg-wind, hope if you use another you can find the way ...
that's all!!
thingiverse
free
CNC Shield V4 mount board by Amazing_Horse
... m3 bolts 8 mm - 4
2) m3 bolts 15 mm - 4
3) pchss-30 - 4
4) m3 t-nut - 4
5) m3 7mm - 4
bord_v4_holder_top_v2 with holes for fan.
thingiverse
free
PrintNC - Cable Chain supports by evil_k
...5 machine screws.
printed everything in petg, 60% infill, 0.6mm nozzle.
solidworks files included if you need to change anything.
thingiverse
free
Hemera 5015 Fan Mount
...late only, can use support blockers to prevent support for the fixing holes (quite slender and don't really support anything)
thingiverse
free
GoPro 3 Remote mount by julien9462
... metalic part gopro head with two screws countersunk m3 and two nuts m3 .
hole used to secure the remote by hanging with a cable.
Stikkadesign
thingiverse
free
Z_knob by StikkaDesign
...z_knob by stikkadesign
thingiverse
knob to manually move the z axis your t8 leadscrew
thingiverse
free
Fanduct for chimera by StikkaDesign
...thingiverse
a simply fanduct for chimera (configuration with the rotating heating blocks - resistance and thermistor in lateral)
thingiverse
free
Another Cable Chain by StikkaDesign
...another cable chain by stikkadesign
thingiverse
a simple cable chain
rotation angle: almost 270 degrees
thingiverse
free
Fanduct for Cyclops by StikkaDesign
...th:
adapter for cyclops hotend: https://www.thingiverse.com/thing:3110986
x_carriage:: https://www.thingiverse.com/thing:3110935)
thingiverse
free
Cyclops_Hotend adapter - with BLTouch by StikkaDesign
.../thing:3111004
only for the type of cyclops in the imagine
21/09/18
added version v2
the part around the hotend is more resistant
thingiverse
free
X_carriage 3wheel - also for the Cyclops Hotend by StikkaDesign
...le with:
adapter for cyclops hotend: https://www.thingiverse.com/thing:3110986
fanduct: https://www.thingiverse.com/thing:3111004
thingiverse
free
Fanduct5015 for TenLOG D3 PRO by StikkaDesign
...grades (bltouch, led lights, etc.)
the rectangular holes are for the electrical clamps and the internal wiring of the fan cables.
thingiverse
free
TenLOG 3d-Pro: LED light support by StikkaDesign
...136639.html?spm=a2g0s.9042311.0.0.27424c4dnwt7vs
compatible with:
adapter for mgn z axishttps://www.thingiverse.com/thing:4818178
thingiverse
free
TenLOG - upgrade pack by StikkaDesign
...ce more resistant)
it is fixed with the two existing m3 screws
you need one (or two) m3x30 screws to fix the sensor to the holder
Bed
3ddd
$1
bed
...bed
3ddd
bed , постельное белье
bed
3ddd
$1
bed
...bed
3ddd
bed , постельное белье
bed
3ddd
$1
bed
...bed
3ddd
bed , постельное белье
bed
3ddd
$1
bed
...bed
3ddd
bed , постельное белье
bed
3ddd
$1
bed
...bed
3ddd
bed , постельное белье
bed
3ddd
$1
bed
...bed
3ddd
bed , постельное белье
bed
3ddd
free
bed
...bed
3ddd
bed , постельное белье
bed
3ddd
free
bed
...bed
3ddd
bed , постельное белье
bed
3ddd
$1
Bed
...bed
3ddd
bed , постельное белье , постель
bed
3d_export
$7
bed adairs bed
...rs bed
3dexport
bed adairs bed in modern style. if you want a smoother surface, please turn on turbosmooth in the modifier list.
Support
turbosquid
$5
Support
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$8
Support 3D Model
...support 3d model
3dexport
support cantilever console
support 3d model tasal 73900 3dexport
3d_export
$5
phone support
...phone support
3dexport
phone
turbosquid
$12
Support bars
...squid
royalty free 3d model support bars for download as max on turbosquid: 3d models for games, architecture, videos. (1411542)
turbosquid
$8
support weights
...id
royalty free 3d model support weights for download as max on turbosquid: 3d models for games, architecture, videos. (1411538)
turbosquid
$2
headphone support
...royalty free 3d model headphone support for download as sldpr on turbosquid: 3d models for games, architecture, videos. (1357583)
turbosquid
$2
Support for flowers
...royalty free 3d model support for flowers for download as max on turbosquid: 3d models for games, architecture, videos. (1463543)
turbosquid
$14
Flower Support
...alty free 3d model flower support for download as max and obj on turbosquid: 3d models for games, architecture, videos. (1497066)
turbosquid
$5
serum support
...yalty free 3d model serum support for download as c4d and obj on turbosquid: 3d models for games, architecture, videos. (1551267)
3d_export
$10
spyro joystick support
...spyro joystick support
3dexport
joystick support of spyro dragon