Thingiverse
BBR Pancar by ByebyeRacing
by Thingiverse
Last crawled date: 3 years ago
This is a full running iteration of my BBR pancar based loosely around the S280 pan car based on the Serpent S240. A modified design was created by Ivan Martin found here _ http://myprotorc.blogspot.it/?m=1. His design took the S240 and shrunk it down to 102mm wheel base for use along side the Kyosho Mini-z. Ivan shared his files with me so I could modify it for my own personal use which I've uploaded here. My design was made with Tinkercad.
The top plate is connected using the spacers from a stand-off kit found on Amazon. All of the wholes found on the underside of the baseplate are countersunk and I used various length countersunk machine screws listed below. The steering knuckles are stock MR-03 knuckles. The mid-mount motor mount is from the Kyosho Mini-Z LM series and the differential is from PN Racing. The body and nose clip are for the TRP Mosler. The wheels are Kyosho 0 offset alloy wheels. The front lip is a trim to fit or may need to be completely trimmed off for certain bodies. NOTE: The nose clip mounting holes are designed around the PN Racing Carbon Fiber Adapter (CPxxx) http://www.kenonhobby.com/PN-Racing-Mini-Z-Mosler-MT900-Carbon-Fiber-Adapter_p_42798.html. Any adapter should work along with ride height spacers.
Parts List -
Wheels base can be adjusted us Kyosho MR-03 MM and RM T-Plates
0 8mm Narrow wheels(Front)
0 or +1 11mm Wheels(Rear)
MR-02 King Pins and C-Clips
Kyosho MR-03 Steering Knuckles
Kyosho MR-03 Stock Springs
DS-919MG Servo
Amazon LU-CC 180Pcs M2 Black Nylon Spacers Hex Nut Screw Stand-off Plastic Accessories Assortment Kit
Amazon 304HC Stainless Steel Hex Countersunk Flat Bolts Screws M2x5mm
Any Kyosho compatible Mini-z Motor Mount
Any Kyosho compatible MR-02/03 Bearing Set
Damper disks and springs
Various Machine thread 2mm Screws from MR-02/03 Stock Kits
UMX Timber Upgrade Lipo Batteries 7.4v 300mAh 35C High Performance
All of my progress and projects can be found on my Facebook page- https://www.facebook.com/byebyeracing/
The top plate is connected using the spacers from a stand-off kit found on Amazon. All of the wholes found on the underside of the baseplate are countersunk and I used various length countersunk machine screws listed below. The steering knuckles are stock MR-03 knuckles. The mid-mount motor mount is from the Kyosho Mini-Z LM series and the differential is from PN Racing. The body and nose clip are for the TRP Mosler. The wheels are Kyosho 0 offset alloy wheels. The front lip is a trim to fit or may need to be completely trimmed off for certain bodies. NOTE: The nose clip mounting holes are designed around the PN Racing Carbon Fiber Adapter (CPxxx) http://www.kenonhobby.com/PN-Racing-Mini-Z-Mosler-MT900-Carbon-Fiber-Adapter_p_42798.html. Any adapter should work along with ride height spacers.
Parts List -
Wheels base can be adjusted us Kyosho MR-03 MM and RM T-Plates
0 8mm Narrow wheels(Front)
0 or +1 11mm Wheels(Rear)
MR-02 King Pins and C-Clips
Kyosho MR-03 Steering Knuckles
Kyosho MR-03 Stock Springs
DS-919MG Servo
Amazon LU-CC 180Pcs M2 Black Nylon Spacers Hex Nut Screw Stand-off Plastic Accessories Assortment Kit
Amazon 304HC Stainless Steel Hex Countersunk Flat Bolts Screws M2x5mm
Any Kyosho compatible Mini-z Motor Mount
Any Kyosho compatible MR-02/03 Bearing Set
Damper disks and springs
Various Machine thread 2mm Screws from MR-02/03 Stock Kits
UMX Timber Upgrade Lipo Batteries 7.4v 300mAh 35C High Performance
All of my progress and projects can be found on my Facebook page- https://www.facebook.com/byebyeracing/
Similar models
thingiverse
free
Kyosho Mini-z MR-01 T-Plate Adapter by ByebyeRacing
...acing
thingiverse
this is an adapter that allows you to use an aftermarket carbon fiber the mini-z mr-03 rm t-plate set to 94mm.
thingiverse
free
BBR Mini-z MM2 Motor Case Diffuser by ByebyeRacing
...e set mm2 type (for mr-03)
some modification may be required
modification may be required to fit the variety of bodies available.
thingiverse
free
Mini-Z F1 Rear Wing by ByebyeRacing
...f1 rear wing by byebyeracing
thingiverse
mini-z f1 rear wing. needs a screw and nut to secure it to the pn racing f1 motor pod.
thingiverse
free
BBR Mini-z Diffusers by ByebyeRacing
...r mount part number mr2289
some modification may be required
modification may be required to fit the variety of bodies available.
thingiverse
free
BBR HDF Mini-Z Wing by ByebyeRacing
...psc=1
this is an initial test of the foil design before i angled ithttps://www.facebook.com/byebyeracing/videos/1068033819971946/
thingiverse
free
Front Knuckle Spacers for Kyosho Mini-Z MR-02/MR-03 by 3dprintingblog
...ght need to lower the extrusion speed a bit while 3d printing the part for best results.
designed by http://minirc-project.com/
thingiverse
free
BBR Truck Mounting Kit by ByebyeRacing
...ransponder platform, and diffuser bumper.
see pictures for mounting. the kit is designed to use long m2 screws and m2 standoffs.
thingiverse
free
Kyosho Mini-Z Front Splitters by ByebyeRacing
...hingiverse
75mmx21mm and 55mmx18mm front splitter for the kyosho mini-z chassis print at .1mm. no supports needed. trim to fit.
thingiverse
free
collapsible kyosho mini Z mr03 rotating stand
... itself. it requires a 5x11x3 bearing and (1) m2x4 countersunk screw(pn part # 700344). i also have one made for a pn2.5 chassis.
thingiverse
free
Mini Z PN Racing Audi R8 LMS Clip
... and doesnt fit well into the body, causing the front the shake. this one is slightly thicker to stabilize the body in the front.
Pancar
thingiverse
free
associated B4 conversion pancar
...associated b4 conversion pancar
thingiverse
associated b4 conversion pancar
thingiverse
free
1/12 pancar tyre holder by cturna
...1/12 pancar tyre holder by cturna
thingiverse
marsrc pancar tyre holder
sorry for photos old tyre :)
thingiverse
free
PANCAR 1/10 ride height spacer by Ph3nyx
..., 2mm and 3mm ride height spacers for 1/10 pancar (maybe 1/12).
compatible with team associated , vbc , roche ect ... (maybe crc)
thingiverse
free
Pancar 1/10 WGT 200mm by helircgd
...re and linkage for steering and two for connect pod at main frame.
you can add a linkage at place of the main show for less flex.
grabcad
free
ara çapa ( pancar )
...ara çapa ( pancar )
grabcad
pancar için ara çapa
grabcad
free
ara çapa ( pancar )
...ara çapa ( pancar )
grabcad
pancar için ara çapa
grabcad
free
Pancar Scale 1/12
...le 1/12
grabcad
pan car scale 1/12 - fully printable 3d. high performance.
minimal construction.
team corally wheels compatible.
grabcad
free
pancar, ot ve saman kıyma makinesi - beet, grass and chaff meat grinder
...s (1500 liters). there are two types of operation (starting), the working type is both asynchronous motor and tractor pto output.
grabcad
free
RC model Pan Car
...model pan car grabcad well, it is my simple pancar ...
Byebyeracing
thingiverse
free
Traffic Cone by ByebyeRacing
...traffic cone by byebyeracing
thingiverse
traffic cone for 1/10 or can be scaled.
thingiverse
free
PUBG Pan Remix by ByebyeRacing
...pubg pan remix by byebyeracing
thingiverse
used ms 3d builder for the logo.
thingiverse
free
Flower knob by ByebyeRacing
...eracing
thingiverse
the wife wanted some flower shaped knobs and this was the best of all that matched the rest of the bathroom.
thingiverse
free
Bridge Test by ByebyeRacing
...bridge test by byebyeracing
thingiverse
just a simple bridge test i used to test a a duct someone made for the ender 3
thingiverse
free
Mini-Z F1 Front Bumper by ByebyeRacing
...eleted the old version and uploaded two new versions. these now have mounting holes and one of the two designs has a nose guard.
thingiverse
free
Bell Crank Flexible steering design by ByebyeRacing
...eracing
thingiverse
this is just a concept showing a possible bell crank design with thin plates connecting the steering blocks.
thingiverse
free
Kyosho Mini-Z Front Splitters by ByebyeRacing
...hingiverse
75mmx21mm and 55mmx18mm front splitter for the kyosho mini-z chassis print at .1mm. no supports needed. trim to fit.
thingiverse
free
Mini-Z F1 Rear Wing by ByebyeRacing
...f1 rear wing by byebyeracing
thingiverse
mini-z f1 rear wing. needs a screw and nut to secure it to the pn racing f1 motor pod.
thingiverse
free
Wood Sheet by ByebyeRacing
...ed that 2d image to microsoft 3d builder. after some adjustments in ms 3d builder and tinkercad i was able to come up with this.
thingiverse
free
Mini-Z Turbine Style Wheel by ByebyeRacing
...that has a turbine inside it.
the offset is zero for ease of printing but feel free to remix it for wider offsets or for the awd.
Bbr
thingiverse
free
Front Bodyclip Ferrari F40 for BBR Basic Chassis by MrSemoule
...front bodyclip ferrari f40 for bbr basic chassis by mrsemoule
thingiverse
front bodyclip made for bbr basic chassis.
thingiverse
free
Front Bodyclip Audi TT 2002 for BBR Basic Chassis by MrSemoule
...front bodyclip audi tt 2002 for bbr basic chassis by mrsemoule
thingiverse
bodyclip made for bbr basic chassis.
thingiverse
free
BBR Keychain by uimakerlab
...tributed to attendees at the 2014 brands and brand relationship conference, which was held at boston university during may 19-22.
thingiverse
free
BBR 1:18 Ferrari SF90 Stand by zdravez
...rrari sf90 1/18" to fit bbr 2019 sf90 f1 die-cast 1:18 model cars. the stand tag reads "2019 ferrari sf90 leclerc"
thingiverse
free
BBR Mini-z Diffusers by ByebyeRacing
...r mount part number mr2289
some modification may be required
modification may be required to fit the variety of bodies available.
thingiverse
free
BBR Truck Mounting Kit by ByebyeRacing
...ransponder platform, and diffuser bumper.
see pictures for mounting. the kit is designed to use long m2 screws and m2 standoffs.
thingiverse
free
BBR Mini-z MM2 Motor Case Diffuser by ByebyeRacing
...e set mm2 type (for mr-03)
some modification may be required
modification may be required to fit the variety of bodies available.
thingiverse
free
BBR HDF Mini-Z Wing by ByebyeRacing
...psc=1
this is an initial test of the foil design before i angled ithttps://www.facebook.com/byebyeracing/videos/1068033819971946/
3d_sky
$8
BLEST NARNI
...blest narni 3dsky blest narni http://blest.ua/ru/portfolio/narni/bbr1tmx-ttml/ ...