BATTERY TRAY PHOENIX 1600 mm by VisiTor

Last crawled date: 3 years, 5 months ago

Here is three battery trays in different lengths, depending on your battery, reciever, ESC and motor configuration.
Lengths:
120 mm
145 mm
168 mm (Comes very close to the motor. Depending on the motor depth, this might not fit)
You probably will make up your mind for the short 120 mm tray.
Help yourself!
I’m still flying my old Phoenix 1600 V 742-6 with the 145mm tray, after the original wooden one went into pieces.
Printed in ABS, you can reuse the original screws to fix the tray to the fuselage (remember ABS shrinks, so make a test print first and then enlarge the STL a bit to match holes)
I don’t know whether you can use any of these trays with other Phoenix gliders, since the hull may be different.
Untested versions:
Phoenix2000 2.0 m Glider 742-3 (will probably fit)
Phoenix Evolution 2.6 m-1.6 m exchangeable 2in1 Glider V742-5 (will probably fit)
Phoenix S 4 Channel Glider with 1600 mm ABS Plastic Fuselage 742-7 (will probably fit)
Phoenix 2400 6-CH Glider with 2400 mm wings 759-3 (???)
If any of you tests, please leave a comment for other RC users.
Enjoy!
O.
NOTE: I don’t want to advertise, just avoid any trouble with copyrights. These pictures were taken from Volantex EU:
https://www.volantexrc.eu/volantex-rc-phoenix1600-16m-glider-v742-6-kit-p-247.html